Free: Contests & Raffles.
IMO different zeros really only matter out past 300 yards. If your shooting out that far you are more likely to be interested in those kinds of details. I shoot 165 grain FMJ and 165 grain hunting rounds, and i cannot tell you there is enough difference in my 06 for me to care. IF i had the skill to whack a coyote at 600yards with my 06 then i might, but then again i'm curiouse what the difference is, not likely much.
223 vmaxs kill em good at 55 grain from my 223, my experience is they make big holes. I use Hornady soft point 223/55 grain, kills good small hole. fmj's in my guns have never shot very acurately, do not kill for crap, lots of runners, have heard they ricochet bad In my 243 I like 80-85 grain, soft point and TSX.Shot a few with a .22 LR, better be very close and get a good shot opportunity, certainly a VERY low percentage round.Whole deal depends on your mid set, what is acceptable to you?, I am not out calling to screw around, I want them dead, now, and move on.Carl
Quote from: Special T on October 23, 2012, 02:25:29 PMIMO different zeros really only matter out past 300 yards. If your shooting out that far you are more likely to be interested in those kinds of details. I shoot 165 grain FMJ and 165 grain hunting rounds, and i cannot tell you there is enough difference in my 06 for me to care. IF i had the skill to whack a coyote at 600yards with my 06 then i might, but then again i'm curiouse what the difference is, not likely much.Put an apple on a fence post at 300 yds. and I'll show you the difference. Even at 200 and 100. Ya SOMETIMES there can be 2 inches difference at a 100 yds with different bullets. Remember he shoots 223 not an 06. I agree with Gringo, hp's are better with that caliber.
wannabhntr,You would be better served by knowing rather than guessing on bullet placement, every rife is different as is every brand/design of bullet. I have had several inches of variation between point of impact by simply switching from Nosler to Hornady both being 55 grain Polymer tipped bullets even though you would think they would shoot to the same point of aim. It has to due with many variables in the bullet construction and design. If someone gets a two inch point of impact difference at 100 yards for deer hunting it will not make much difference in killing of the animal but a two inch POI on a coyote can make all the difference in the world in bang flops or runners. Feel more confident in your equipment by taking the guess work out of the equation.
I love your Sig line "I have two lines you should never cross.....Horizontal and Vertical"
Quote from: VarmintVentilator on October 23, 2012, 05:36:02 PMQuote from: Special T on October 23, 2012, 02:25:29 PMIMO different zeros really only matter out past 300 yards. If your shooting out that far you are more likely to be interested in those kinds of details. I shoot 165 grain FMJ and 165 grain hunting rounds, and i cannot tell you there is enough difference in my 06 for me to care. IF i had the skill to whack a coyote at 600yards with my 06 then i might, but then again i'm curiouse what the difference is, not likely much.Put an apple on a fence post at 300 yds. and I'll show you the difference. Even at 200 and 100. Ya SOMETIMES there can be 2 inches difference at a 100 yds with different bullets. Remember he shoots 223 not an 06. I agree with Gringo, hp's are better with that caliber. Not at 250 yards it doesn't. I had your idea with my .300 and bought cheap rounds for shooting yotes. They were a good 3 inches different at 100 yards, meaning at 200 I couldn't count on them to even hit the yote, let alone hit it somewhere good.2 in aimed center mass still equals dead coyote... HP will put them down quicker in that caliber sure... but we still have used FMJ in the bro inlaws AR and it gets the job done...