collapse

Advertisement


Author Topic: Removing Antelope Horns  (Read 17464 times)

Offline Roger

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2008
  • Posts: 295
  • Location: Sequim, Wa
Removing Antelope Horns
« on: October 31, 2008, 09:34:49 AM »
Question. How do you remove the horns off an antelope so you can preserve the flesh underneath????

The goats I have killed before werelate in the season so the horns just pulled off. This one i got now was early in the season so the horns are stuck on good. It's been in the freezer since the kill in early Oct.

Thanks for the advice.

Roger

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39177
  • Location: Rochester
    • robert68
Re: Removing Antelope Horns
« Reply #1 on: October 31, 2008, 09:38:44 AM »
Here some info for ya:  http://www.mckenziesp.com/KB/HTML%20KB/Pronghorn/pronghorn.asp

Probably a little more than you need for what you're doing but maybe it will be of some help.

Offline bowsandhose

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2008
  • Posts: 1975
  • Location: Snohomish
Re: Removing Antelope Horns
« Reply #2 on: October 31, 2008, 09:46:09 AM »
not sure but i would think you rot them off like sheep horns  after about a week should be able to pull them off and clean them. you don't want the meat to dry out so  keep them in a bag. warring do not attempt until you have confirmed that's what to do
Any animal with a bow is a trophy.               IAFF
Save a 1000 elk kill a wolf.

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32890
  • Location: Pacific NorthWest
Re: Removing Antelope Horns
« Reply #3 on: October 31, 2008, 09:55:28 AM »
Why dont you guys ask Michelle or Charlie?
The things that come to those who wait, may be the things left by those who got there first!

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Removing Antelope Horns
« Reply #4 on: October 31, 2008, 01:06:09 PM »
First off are you atempting to do a Euro or a horn plaque? 

Pull them out of the freezer and seal them inside a plastic bag with about 1/2 cup water.  Put them somewhere warm and let them set for about a week.  They will pull right off.  After that go ahead and cut about 2 1/2" off the top of the core. 

HORN MOUNT: If you are doing a horn mount go ahead at this point simmer the skull cap and core.  NOT THE SHEETHS (HORNS), or they will fall apart and swell.  Once all the meat is gone you can re attach with bondo or epoxy.

EUROPEAN MOUNT:  If your going to do a Euro I would suggest Macerating the skull only in a 5 gallon bucket with a tank hear. 


Offline EastWaViking

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2008
  • Posts: 1917
Re: Removing Antelope Horns
« Reply #5 on: October 31, 2008, 01:15:10 PM »
I did my own euro skull once.  Key word once.  It turned out great, but boiling the antelope skull was gross.

from now on I'm leaving it to the pros.



Offline Roger

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2008
  • Posts: 295
  • Location: Sequim, Wa
Re: Removing Antelope Horns
« Reply #6 on: October 31, 2008, 03:55:17 PM »
Michelle


Pull them out of the freezer and seal them inside a plastic bag with about 1/2 cup water.  Put them somewhere warm and let them set for about a week.  They will pull right off.  After that go ahead and cut about 2 1/2" off the top of the core. 


Thanks for the info.

I'm just doing a horn mount and another question is after the horns are off do I put the remaining flesh on the skull in borax to preserve it before putting the horns back on for the finish?

Thanks again

Roger

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Removing Antelope Horns
« Reply #7 on: November 01, 2008, 12:19:39 AM »

HORN MOUNT: If you are doing a horn mount go ahead at this point simmer the skull cap and core.  NOT THE SHEETHS (HORNS), or they will fall apart and swell.  Once all the meat is gone you can re attach with bondo or epoxy.

Once the sheeths are off the core I make a strong dawn dish soap solution and wash the inside of the sheeths out.  Than I rinse them really well.  Towel dry and put Dry Preserve inside both sheeths and let them dry.  That should take care of the smell.  Once tthe skull cap and cores are dry after simmering re attach the sheets on to the cores.


Offline Roger

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2008
  • Posts: 295
  • Location: Sequim, Wa
Re: Removing Antelope Horns
« Reply #8 on: November 01, 2008, 08:38:23 AM »
Thanks for the info, much appreciated.

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Removing Antelope Horns
« Reply #9 on: November 01, 2008, 10:33:04 AM »
No problem

Offline bucklucky

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 9541
  • Location: Skookumchuck Wa.
    • Charlie Smith
Re: Removing Antelope Horns
« Reply #10 on: November 01, 2008, 11:25:19 AM »
Why do you cut 2 1/2 inches off the core.

Offline grizzlygibbs

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2008
  • Posts: 339
  • Location: Wenatchee
Re: Removing Antelope Horns
« Reply #11 on: November 14, 2008, 05:20:24 PM »

HORN MOUNT: If you are doing a horn mount go ahead at this point simmer the skull cap and core.  NOT THE SHEETHS (HORNS), or they will fall apart and swell.  Once all the meat is gone you can re attach with bondo or epoxy.

Once the sheeths are off the core I make a strong dawn dish soap solution and wash the inside of the sheeths out.  Than I rinse them really well.  Towel dry and put Dry Preserve inside both sheeths and let them dry.  That should take care of the smell.  Once tthe skull cap and cores are dry after simmering re attach the sheets on to the cores.

What kind of dry preserve?  Stock salt?  or ???

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Removing Antelope Horns
« Reply #12 on: November 14, 2008, 09:03:47 PM »
No it's Dry Preserve.  It's kinda like a powdered borax with other preserving stuff in it.  Go to www.taxidermy.com and look it up their.  They sell some smallish bags of it. 

You CAN NOT rub it on a hide to preserve it like a tanned skin. 

Offline grizzlygibbs

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2008
  • Posts: 339
  • Location: Wenatchee
Re: Removing Antelope Horns
« Reply #13 on: November 15, 2008, 11:32:24 AM »
ok so i got the sheaths off today and i am boiling the skull, so can i just use borax and do i just dump it in the sheath?  or sprinkle it on the outside and inside?

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Removing Antelope Horns
« Reply #14 on: November 15, 2008, 06:19:00 PM »
Yeah borax will work. 

Take both sheaths and wash them with dawn dish soap and water.  Rinse well and towel dry.  Than fill both sheaths with borax.  It won'thurt anything if you get borax on the outside.  Make sure the borax coats the entire insideof the sheaths.  Than just set them aside and let them dry you can reattach them to the core later.

 


* Advertisement

* Recent Topics

Idaho General Season Going to Draw for Nonresidents by vandeman17
[Today at 04:43:04 PM]


Resetting dash warning lights by jackelope
[Today at 03:02:53 PM]


Colorado Results by vandeman17
[Today at 02:29:43 PM]


What's flatbed pickup life like? by Boss .300 winmag
[Today at 01:29:15 PM]


Burrowing Animal by b0bbyg
[Today at 12:43:47 PM]


Cold bore or fouled barrel. by hunter399
[Today at 12:36:22 PM]


Please Report Problems & Bugs Here by HntnFsh
[Today at 09:13:54 AM]


The time clock has started.....and go. by hunter399
[Today at 07:37:38 AM]


DIY Ucluelet trip by CP
[Today at 05:48:15 AM]


Oregon spring bear by time2hunt
[Yesterday at 08:03:28 PM]


Oregon Seed #'s by Doublelunger
[Yesterday at 07:35:15 PM]


WDFW falsely advertising preference points by hunter399
[Yesterday at 04:38:43 PM]


Black Eagle arrows deals by kodiak06
[Yesterday at 02:02:59 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal