How much to re-fletch arrows?

[Band]

I have several arrows that need the vanes stripped off and replaced.  How much should I expect to pay for this service at an archery shop?

[JKEEN33]

Buy a jig and do it yourself. Nothing to it.

[EvergreenArchery]

Band- We charge $3 per arrow for a standard 3 fletch arrow. Any wraps or 4 fletch will be an additional charge. Not sure what other shops are charging so I can't help you there.

EA

[pianoman9701]

Go to Evergreen or whoever is your local shop, and buy an AZ fletch, some glue, and two colors of fletchings. You can now repair your own arrows in less time than it takes to drive to the archery shop, and for pennies after the initial investment of $40. You're welcome.

[buckfvr]

Band- We charge $3 per arrow for a standard 3 fletch arrow. Any wraps or 4 fletch will be an additional charge. Not sure what other shops are charging so I can't help you there.

EA

I wouldnt do it for 6$ a shaft..........First timers, I help strip and show how to do it, them taking over after a couple shafts.........next time, a couple minutes of refresher, then they do it themselves........no reason guys cant bring you stripped shafts...........

[EvergreenArchery]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue have a cost and our time / labor is worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

[whackmaster]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue and our time are worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

I think $3.00 an arrow is very fair 

[nw_bowhunter]

$3.00   that's fair and if you don't re-fletch very often make sense.. Of course if you need to re-fletch all the time than buying a jig makes would be a good idea. Although I can't recall the last time I had to fletch one of my arrows. With the new blazers I don't seem to have the issue that I used to with the 4 or 5" fletching's.

[pianoman9701]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue and our time are worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

I think $3.00 an arrow is very fair 

  Very fair.

[buckfvr]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue have a cost and our time / labor is worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

You read it wrong man...........I wouldnt do it for 6 bucks is to indicate you are being very generous @ 3bucks......its a pain in the butt to strip arrows to refletch, imho, and a chore that I accept as my own when needed because I know there are shop guys out there that provide it as a service only because it goes with the territory.

Fletching is just one of those things that for me is a must do yourself chore.  I think a jig should be sold with every bow........

[xXLojackXx]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue have a cost and our time / labor is worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

For me, $3 a shaft is more than fair. And it's about supporting our archery shops. I can't even count how many shops have come and gone. There isn't a huge margin that these shops have room to deal with. It's only getting harder for them too with online shopping. If you want to be able to have a name and face to talk to when purchasing archery equipment, then go support your local shop. If $36 is too much to get your arrows re fletched, then take up a different sport. Although I don't know of many cheaper than archery.

[pianoman9701]

I love fletching my own. The only thing I don't have is a shaft cutter, which I want but don't need. I get real enjoyment out of wrapping the shafts and then using my own colors, having everything line up the same. It's very satisfying to do a dozen arrows and then see them all done together. I know; I'm really simple. 

[EvergreenArchery]

Buckfvr- Sorry if you feel $3 an arrow is too much. Not sure where you got $6 and can appreciate that you would show people how to fletch. We would have no problem teaching someone to fletch but that's not what the OP asked. Unfortunately fletching, glue have a cost and our time / labor is worth something. In the long run it is cheaper to buy a jig and do repairs yourself but there are folks that just don't want to mess with it.

EA

You read it wrong man...........I wouldnt do it for 6 bucks is to indicate you are being very generous @ 3bucks......its a pain in the butt to strip arrows to refletch, imho, and a chore that I accept as my own when needed because I know there are shop guys out there that provide it as a service only because it goes with the territory.

Fletching is just one of those things that for me is a must do yourself chore.  I think a jig should be sold with every bow........

That makes more sense, thanks for clarifying. 

[lostbackpacker]

I like fletching my own also.  I am fortunate enough to live within a mile of Cabelas.  I just take my arrows over there and they cut them to size for free.  it doesnt matter that I dont buy them there. 

[buckfvr]

The only thing I dont do for myself YET is make my own strings.........but that is next.

Im am going to treat a new string this morning, then do a remove and replace after it dries...........for myself.

I love fletching new shafts, its the scraping them off carbon shafts I hate............thats why I still love aluminums, even though I mostly shoot carbon.