2014 Broadhead rules ... So what broadheads to use???

[RadSav]

Waiting for the Savoras to come out.

So am I   

Waiting and waiting and waiting... 
Sounds like a bird around here...two weeks, two weeks, two weeks

One of these days!  On the bright side I go look at a piece of property this week.  Might be cutting out the middle men by this time next year.  Then no more waiting!

[Nice Racks]

Wasp Boss 125 grain.

[6haase6]

Muzzy four blade 90g and 100g. Muzzy three blade 75g.

[270Shooter]

G5 striker 100 grain, fly good and scary sharp

[Russ McDonald]

Muzzy mx3 100gr

in the 4 blade. 

Going to switch to 125gr. though and waiting for the Savoras too.

[sakoshooter]

Shuttle t for me.

[Smg id=12117]

What? Darn Button, I thought you were a Magnus Stinger guy for sure.

[sakoshooter]

Waiting for the Savoras to come out.

So am I   

Waiting and waiting and waiting... 
Sounds like a bird around here...two weeks, two weeks, two weeks

One of these days!  On the bright side I go look at a piece of property this week.  Might be cutting out the middle men by this time next year.  Then no more waiting!

I"m waiting for my new Savora's....................................... Delmastro Supremo Killem Deader Than A Post Heads. Yup, that's what I'm waitin for...........................

[D-Rock425]

Lots of great heads to choose from.  Personally I like wac'ems but lots of good heads out there to choose from.

[Button Nubbs]

Shuttle t for me.

[Smg id=12117]

What? Darn Button, I thought you were a Magnus Stinger guy for sure.

I was for sure. They're still great heads and I still have a bunch.

[KimWar1911]

2 blade single bevel Stricklin Helix.

[DoubleJ]

Waiting for the Savoras to come out.

So am I   

Waiting and waiting and waiting... 
Sounds like a bird around here...two weeks, two weeks, two weeks

One of these days!  On the bright side I go look at a piece of property this week.  Might be cutting out the middle men by this time next year.  Then no more waiting!

You need any help with any of that, you let me know. 

Until the new ones come out, I'll still be shooting my Savora's, circa 1983.

[RadSav]

You need any help with any of that, you let me know. 

Until the new ones come out, I'll still be shooting my Savora's, circa 1983.

They are not that old!   

I think Mark and I designed that one in '92 with first production delivery '94 if I'm not mistaken.  Still one heck of a broadhead!  Probably the best combination of flight, cut and terminal performance still today.  Since then the Squaw, Crazy Larry and myself have a long list of critters taken with it using bows from the Lorraine's 214fps to some I tested recently with hunting arrow speeds exceeding 320.  It's a good one and will return to the lineup once I can make them at a price point everyone can afford.

I'll be up looking at that property by your place this week.  Real Estate agent thinks I can get that piece and the one next to it for less than the asking price of just the one.  Just need to find a screw machine operator and/or programmer in Shelton.  That might be harder than finding the right property!

[D-Rock425]

You need any help with any of that, you let me know. 

Until the new ones come out, I'll still be shooting my Savora's, circa 1983.

They are not that old!   

I think Mark and I designed that one in '92 with first production delivery '94 if I'm not mistaken.  Still one heck of a broadhead!  Probably the best combination of flight, cut and terminal performance still today.  Since then the Squaw, Crazy Larry and myself have a long list of critters taken with it using bows from the Lorraine's 214fps to some I tested recently with hunting arrow speeds exceeding 320.  It's a good one and will return to the lineup once I can make them at a price point everyone can afford.

I'll be up looking at that property by your place this week.  Real Estate agent thinks I can get that piece and the one next to it for less than the asking price of just the one.  Just need to find a screw machine operator and/or programmer in Shelton.  That might be harder than finding the right property!

I can run some machines rad.  Program skills aren't up to par but I can certainly make enough hand written edits to make a part (Right or wrong). 

[RadSav]

I can run some machines rad.  Program skills aren't up to par but I can certainly make enough hand written edits to make a part (Right or wrong).

I imagine the commute from your place to Shelton might be a little far  

The helical interpolation is what gets most basic cnc guys.  It's also the reason our peep sights must be run of such expensive machines.

[D-Rock425]

That would be a little bit of a drive.