Best Place to get a Scope mounted North of Marysville?

[ghosthunter]

I wa wondering if anyone had a good place to get a scope mounted on a new rifle North of Marysville?

Does Cabelas mount scopes?

[CAMPMEAT]

Have it mounted where you bought the gun or do it yourself. It's really easy.

[cooltimber]

diy it's easy,level rifle in soft vise,look through bore to object at 25 yrd's..mount scope and put a level on top cap.adjust eye to scope distance.gently start to tighten scope mount's,adjust to bore sighting of object. then tighten scope mount's.shoot at 25 yard's for zero,adjust

[ghosthunter]

I would rather have it done.

[Tbar]

Have you checked Anacortes telescope? I believe they have a gunsmith.

[Bango skank]

If you let cabelas do it yheyll prpb svrew it up.  Not to mention, how is spmebody else going to get the eye relief right for you, better than you will?

[ghosthunter]

Have you checked Anacortes telescope? I believe they have a gunsmith.

Good Idea.

[ghosthunter]

If you let cabelas do it yheyll prpb svrew it up.  Not to mention, how is spmebody else going to get the eye relief right for you, better than you will?

I have always had some one else do it. Never had a problem. I can adjust it if need be. I just hate messing with those tiny screws.

[elk247]

Can't skagit gun works do it for you?

[h2ofowlr]

Have you checked Anacortes telescope? I believe they have a gunsmith.

That place has to be the worst one I have hit from Lynnwood to the Canadian boarder.   

[ghosthunter]

Maybe
I was just seeing if someone had a favorite up this way.

There is no rush. I like to gleen info and think stuff through. I did watch some scope mounting videos on you tube after reading replys.

[pilebuck]

Skagit arms did mine

[LEN]

For what you pay to have one mounted you can buy a torque screw driver a level kit and a bottle of the NON permanent lock tight and can do for ever. Just take it slow a little at a time and you will be fine. OH the only thing is the little screws always drop where you can't find them, That's the only problem I have ever had.

LEN