Reloading for a 300wsm

[gutsnthegrass]

I have a model 70 300wsm that I am reloading for.  I have reloaded for it in the past but want to switch it up to see if I can get better accuracy.  I want to try 180gr Accubonds and I have 3 different powder to choose from.  I have some IMR4350, IMR4831, and H4831.  I dont have a problem going and getting different powder to try, but I already have the ones listed.  Lets hear what some of you guys are using and why. Thanks in advance for any info given!

PS, I have 100 cases that have never been fired.  I also have CCI large rifle magnum and CCI BR2 large rifle primers.

[DRobnsn]

I'm curious about this as well. I have a Tikka in the same caliber. I've been using store bought ammo the last couple years. Winchester Ballistic silvertip 180's. The gun has no problem shooting decent groups with them. When I got the gun it came with dies some brass and a pound of Vihtavuori N550. Previous owner said he was loading Nosler 180 ballistics with good results. Not something you'd want to hunt with though if you ask me.

I was considering trying the Vihtavuori with the accubonds myself. When time allows of course (hence the store bought ammo)

Guts what barrel length do you have?

[carpsniperg2]

  I run 180g accubonds with IMR 4350 in my 300wsm tikka. They shoot very well. I ran the 190g bergers and they shot well but I think I am going back to the accubonds this year.

[kentrek]

185 bergers with 62.5 grains of reloader 17 @ 2875 fps

[TommyH]

Tagged

[Emptyhanded]

I've had good luck with h4350 and 180 ballistic tips, 180 partitions, and 165 partitions. My current load is with imr4350 and 165 Barnes ttsx.


Sent from my iPhone using Tapatalk

[elkaholic123]

Nosler 180 gr Accubond, 66gr Reloader 17, 3080 fps 24 in. barrel 

[wsmnut]

I've got two of these.  One likes 180gr. TSX with RL-19.  The other shoots anything better than I can, but currently is shooting 190 Bergers with RL-17.  Got excellent results also with 180gr TTSX and H4350.

Wsmnut

[Biggerhammer]

I like 150gr Accubonds on top of H4350.

[WoodlandShooter]

some light loads listed above

anyone pushing 190s and 215s with H1000?

[kentrek]

some light loads listed above

anyone pushing 190s and 215s with H1000?

I have some i was gona play with...dang things are long tho ! Need to do some work on my rifle to get them to fit...recoil might killer tho if I get an speed out of em

[Damnimissed]

My wife's X-Bolt is shooting 5/8" groups with 200gr Accubonds over 68gr IMR 7828ssc and CCI 250 with Win brass and a COAL of 2.84

[yorketransport]

I always like about 70 grains of H4831 and a CCI 250 primer with a 180 grain bullet in the 300 WSM.

For the heavier 200+ grain bullets I like IMR 7828ssc.

Andrew

[Buzz2401]

Load what ya got those are all good powders for the WSM

[tonymiller7]

180 grain Accubonds w/ W760.  Can't remember the grains of powder right now but it's hot.  5 holes touching at 100 yds.  I get 3015 at the muzzle (via chrono) out of a Sako A7