collapse

Advertisement


Author Topic: How to pick downrigger rod length?  (Read 8640 times)

Offline atfulldraw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2010
  • Posts: 302
  • Location: Broadview MT
How to pick downrigger rod length?
« on: June 25, 2015, 12:00:07 PM »
Downrigger fishing is new to me and I was wondering what I need to consider for choosing a rod length. I am am seeing most rods in the 7'-10' range and I feel a little lost on what I would need.  So hear are a few fun facts for you guys. 
1. I will be fishing for silver's and pinks.
2. I have 30" booms on my scotty downriggers. 
3. My boat is 17' long with a 72" beam.
Thanks for any help.

Offline Webfoot

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2007
  • Posts: 314
  • Location: Forks Wa.
Re: How to pick downrigger rod length?
« Reply #1 on: June 25, 2015, 12:07:02 PM »
I have been using 8 1/2 foot rods with my downriggers for many years and think they are just right. Any longer and they are a pain in the butt when inside of the boat, any shorter and they don't get the right amount of bend when when deployed.

Good luck
John

Offline elkaholic123

  • Political & Covid-19 Topics
  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Jun 2008
  • Posts: 1766
  • Location: Lake Stevens
  • Groups: Montana Dirty Dozen,Life member RMEF,NAHC, WSF
Re: How to pick downrigger rod length?
« Reply #2 on: June 25, 2015, 12:16:00 PM »
8 1/2 is all we ever used but my friend that does a lot of fishing swears by his Lamiglas 10 1/2 Kenai Kwiks  :dunno:
elkaholic

Offline WAcoueshunter

  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: May 2007
  • Posts: 2598
Re: How to pick downrigger rod length?
« Reply #3 on: June 25, 2015, 12:19:28 PM »
Yeah, 8.5 or 9 for me.  I've had shorter and longer, and both directions have their drawbacks. 

Offline SkookumHntr

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2900
  • Location: Tono, WA
Re: How to pick downrigger rod length?
« Reply #4 on: June 25, 2015, 12:23:55 PM »
We use 10' rods, makes it nice to get around the offshore bracket when a king goes to he other side if the boat
IBEW89 RMEF MDF CCA

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7030
  • Location: Mukilteo
Re: How to pick downrigger rod length?
« Reply #5 on: June 25, 2015, 01:15:58 PM »
When fishing alone I use a 7 foot rod because it is a real trick to net a fish with one hand and control a long rod with the other.

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32899
  • Location: Pacific NorthWest
Re: How to pick downrigger rod length?
« Reply #6 on: June 25, 2015, 01:17:41 PM »
I use 8.5's as well. :twocents:
The things that come to those who wait, may be the things left by those who got there first!

Offline Mark251

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2015
  • Posts: 2608
  • Location: Spokane
Re: How to pick downrigger rod length?
« Reply #7 on: June 25, 2015, 01:38:43 PM »
I have a set-up similar to yours and I go with 8' to 8.5' rods. I've tried shorter and longer but those are the rods that seem to work best for me.  Good Fishing!

Mark

Offline atfulldraw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2010
  • Posts: 302
  • Location: Broadview MT
Re: How to pick downrigger rod length?
« Reply #8 on: June 25, 2015, 02:12:43 PM »
Sounds like 8' 6" is the way to go. Thanks guys

Offline jamesfromseattle

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2014
  • Posts: 537
  • Location: Seattle
Re: How to pick downrigger rod length?
« Reply #9 on: June 25, 2015, 02:48:13 PM »
If you start focusing on kings I'd recommend trying the really long (10'6") noodle mooching rods that are popular up in BC because they help absorb the big head shakes.

Sounds like you're right on track with the 8'6" for pink and coho, though.

Offline hogslayer

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Dec 2012
  • Posts: 818
  • Location: Snoqualmie-Belfair
  • Groups: Bloody decks
Re: How to pick downrigger rod length?
« Reply #10 on: June 25, 2015, 02:50:36 PM »
Just get a lamiglass Kenai Kwik and be done with it.

Offline MtnMuley

  • Site Sponsor
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Aug 2009
  • Posts: 8686
  • Location: NCW
Re: How to pick downrigger rod length?
« Reply #11 on: June 25, 2015, 05:35:48 PM »
I use mostly 8.5s,  but have a couple 9. They all work, but would stay between those two lengths. 10s have a great bend in the rigger, but are just too big for me to use when baiting and general use around the boat. :twocents:

Offline cohoho

  • Trade Count: (+9)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 4202
  • Location: Black Diamond
  • Sturgeon Time Yet????
Re: How to pick downrigger rod length?
« Reply #12 on: June 25, 2015, 05:37:05 PM »
9ft for me.  Do not spend too much on DR rods unless they are dual purpose rods then buy higher end stuff or if your buying only one.  I like to really get them tight.  DR rods, no reason to buy the best stuff, just a super quality reel as the rod is not used to sense a bite.  Make sure it has a flexible top with a strong lower end.    I like all of mine to be the same set up on the boat so have 6-8 sets all rigged the same.  I use different color line on several of the reels, so it is easier to determine which line goes where when that unfortunate event of DR tangles that sometimes occurs on the rods...  All my DR rods are Ugly Stick Lites - which the boat and I have caught hundreds of Salmon each year without fail, I cannot say the same on a three nice Lami-snaps that went south under that pressure.  If you take a high end rod, bend it to capacity then step forward as sometimes people on boat randomly due to waves, rocking, excitement, etc.  SNAP goes the rod as it was fully loaded and that added pressure had no where to go - but back at you- things happen, but I can honestly state - I have never broken an Ugly Stick lite while DR fishing....   I use them coupled with Avet SX & SXJ reels, small tightly spaced reel that makes winding easy at high speed retrieval rates or when power is needed.  A different story of course on rod choice if using for bite detection fishing...

Although my buddy has nothing but G-Loomis 10.5ft and they are pretty sweet, but I am not spending $350 each for 6 to 8 rods... :yike:

Offline MtnMuley

  • Site Sponsor
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Aug 2009
  • Posts: 8686
  • Location: NCW
Re: How to pick downrigger rod length?
« Reply #13 on: June 25, 2015, 05:46:44 PM »
I kinda disagree cohoho. You definately get what you pay for as far as Loomis's go. I buy them for the fight after the rigger goes off. Never tried the US lites though.   I run all light rods here on the eastern side of the state, and in my boat,  it's all about the fight you have on your hands once the fish is on.    :twocents:  I totally agree on the quality reel part :tup:

Offline cohoho

  • Trade Count: (+9)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 4202
  • Location: Black Diamond
  • Sturgeon Time Yet????
Re: How to pick downrigger rod length?
« Reply #14 on: June 25, 2015, 06:18:11 PM »
I kinda disagree cohoho. You definately get what you pay for as far as Loomis's go. I buy them for the fight after the rigger goes off. Never tried the US lites though.   I run all light rods here on the eastern side of the state, and in my boat,  it's all about the fight you have on your hands once the fish is on.    :twocents:  I totally agree on the quality reel part :tup:

Probably so, but I only fish salt on riggers..   And I have a lot of different people in the boat, some never fished until taken them out (Wounded Warriors) and I supply the gear, so in the event a rod gets trashed, it is all good!   But I do have a couple nice ones, but feel selfish if I have them on the boat and not for general use..

I did watch a $350 Lamiglas SI graphite handled rod and a $200 reel go screaming out of wet, numb hands one day - that made my mind up to stick with Ugly Sticks pretty quickly..  lol

 


* Advertisement

* Recent Topics

AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by mburrows
[Today at 06:22:12 AM]


Unknown Suppressors - Whisper Pickle by Sneaky
[Today at 04:09:53 AM]


Early Huckleberry Bull Moose tag drawn! by HillHound
[Yesterday at 11:25:17 PM]


THE ULTIMATE QUAD!!!! by Deer slayer
[Yesterday at 10:33:55 PM]


Archery elk gear, 2025. by WapitiTalk1
[Yesterday at 09:41:28 PM]


Utah cow elk hunt by bearpaw
[Yesterday at 07:18:51 PM]


Oregon spring bear by kodiak06
[Yesterday at 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[Yesterday at 04:37:01 PM]


Pocket Carry by BKMFR
[Yesterday at 03:34:12 PM]


A lonely Job... by Loup Loup
[Yesterday at 01:15:11 PM]


Range finders & Angle Compensation by Fidelk
[Yesterday at 11:58:48 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 10:55:29 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Yesterday at 08:40:03 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Yesterday at 07:53:52 AM]


Yard bucks by Boss .300 winmag
[July 04, 2025, 11:20:39 PM]


Yard babies by Feathernfurr
[July 04, 2025, 10:04:54 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal