collapse

Advertisement


Author Topic: Barnes MZ's terrible loading!!  (Read 4198 times)

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Barnes MZ's terrible loading!!
« on: September 22, 2015, 09:44:30 AM »
I bought some Barnes Mz's last night. Installed my new Williams fire sight peep and front sight. And proceed to the old swimming hole this morning to get my muzzleloader sighted in. Shot a couple hornady sst through the gun to get it shooting close. Then the bad news.....tried to load the Barnes mz and wow how tight that fit was. I could barely get it down will all my power behind it.
4 shots later and it never got better. In fact I feel it was tougher to load.  :bash:

What should I do!? Can I buy new sabots that would be easy. If so which should I buy!?

Offline JimmyHoffa

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 14545
  • Location: 150 Years Too Late
Re: Barnes MZ's terrible loading!!
« Reply #1 on: September 22, 2015, 09:48:31 AM »
I find that after a few shots of anything, the muzz gets tougher and tougher.  The lube burns out and the plastic and powder residue build up.
You could try putting lube on the sabot if you aren't wanting to do bore cleaning every ten or so shots.

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Re: Barnes MZ's terrible loading!!
« Reply #2 on: September 22, 2015, 09:51:07 AM »
Any particular lube I should try?

Offline JimmyHoffa

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 14545
  • Location: 150 Years Too Late
Re: Barnes MZ's terrible loading!!
« Reply #3 on: September 22, 2015, 09:52:49 AM »
I've had decent success with bore butter.  Just have to be consistent.

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39203
  • Location: Rochester
    • robert68
Re: Barnes MZ's terrible loading!!
« Reply #4 on: September 22, 2015, 09:54:54 AM »
I would use a different sabot. Try the Harvester "crush rib" sabot. Or, buy the Barnes TEZ bullets. That's what I'm shooting in my Optima and they load easy.

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7030
  • Location: Mukilteo
Re: Barnes MZ's terrible loading!!
« Reply #5 on: September 22, 2015, 10:11:06 AM »
Don't use lube with sabots, it screws up the accuracy.  Find a sabot that fits or change bullets.

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Re: Barnes MZ's terrible loading!!
« Reply #6 on: September 22, 2015, 10:22:48 AM »
I'm gonna give the harvester crush rib sabots a try.

Thanks guys

Offline Brushbuster

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2007
  • Posts: 898
Re: Barnes MZ's terrible loading!!
« Reply #7 on: September 22, 2015, 10:44:32 AM »
I would use a different sabot. Try the Harvester "crush rib" sabot. Or, buy the Barnes TEZ bullets. That's what I'm shooting in my Optima and they load easy.
  :tup:

The following has worked for my Knight Bighorn & Disc Extreme.

1. Do a JB bore paste Kroil oil treatment to the barrel. Just search this website for more detailed instructions.
2. I use Barnes Spitfire-Fire T-ez 50 cal 290 grain item 30607 & switch the sabot to the Harvester black crush rib sabot p/n H15045BR.
3. Swab barrel w/ solvent & dry patches between shots.

The bullets are much easier to load with the setup above. I shot 15 times at the range last week with no problems loading. You may also want to pick up a range rod. For hunting, I can also now load a second shot without the need of swabbing the barrel.

I need to thank Sabotloader, Bobcat & others on this site for this knowledge. I can just attest to the fact it worked for my muzzies. Good Luck!!  :tup:

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Re: Barnes MZ's terrible loading!!
« Reply #8 on: September 22, 2015, 10:59:28 AM »
I've learned so much from researching this forum over the last few days. Much more than any employees at any local sporting goods could even begin to teach.

Offline MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 571
  • Location: Boncarbo Colorado
Re: Barnes MZ's terrible loading!!
« Reply #9 on: September 22, 2015, 11:26:28 AM »
Barnes T-EZ

Offline Timberstalker

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Apr 2008
  • Posts: 9266
  • Location: Tri-Cities
  • Just one more ridge
Re: Barnes MZ's terrible loading!!
« Reply #10 on: September 22, 2015, 11:33:16 AM »
Barnes T-EZ

Absolutely.  I've broken two ramrods with the TMZ's.  Awesome bullets, just a bear to load.
If you aint hunting, you aint livin'

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Re: Barnes MZ's terrible loading!!
« Reply #11 on: September 22, 2015, 07:53:42 PM »
I picked up the crush rib sabots earlier and wow what a difference they made in a dirty barrel.

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: Barnes MZ's terrible loading!!
« Reply #12 on: September 25, 2015, 10:40:34 AM »
I picked up the crush rib sabots earlier and wow what a difference they made in a dirty barrel.

Where do they carry these crushed ribbed sabots? Does cabelas carry them? I'm in northwest washington. Trying to avoid ordering online.


Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2513
  • Location: Matlock
Re: Barnes MZ's terrible loading!!
« Reply #13 on: September 25, 2015, 01:02:26 PM »
Yes I bought them at cabelas

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: Barnes MZ's terrible loading!!
« Reply #14 on: September 25, 2015, 01:04:32 PM »
Which location?

 


* Advertisement

* Recent Topics

Jupiter Mountain Rayonier Permit- 621 Bull Tag by Hunter81
[Today at 07:22:50 PM]


Sauk Unit Youth Elk Tips by Boss .300 winmag
[Today at 07:12:15 PM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:07:33 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Today at 06:57:10 PM]


3 pintails by metlhead
[Today at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Today at 04:37:55 PM]


A lonely Job... by AL WORRELLS KID
[Today at 03:21:14 PM]


Unit 364 Archery Tag by buglebuster
[Today at 12:16:59 PM]


In the background by zwickeyman
[Today at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal