Author Topic: Who has the itch for some Rockchuck [Graphic Images] (Read 15516 times)

Sage Weasel · « **on:** January 30, 2009, 10:08:03 PM »

I can't wait for this weather to break. Mid February is time to break out the long range rifles and the AR's and whack some Rockchcuks. I have several properties I hunt where the owners want them gone and dead(Orchards). So I put it to them before they can have their young. Here in Wenatchee they always come out about mid February, my personal best is 176 in a spring/summer. I am a Chuck addict!

These are a couple photo's from this last spring/summer...

A couple out of the cherry orchard with the M4..

This is the before shot, through the spotting scope.

This is the during shot at 14X, of coarse the carbine on the hood for photo purposes only

The after math

.223 Rem700 SPS and a 50gr Nosler Ballistic Tip.

.270 Winchester and a 110gr Hornady V-max.

Bonus yote on the trip with a Rem700 .375 Ultra Mag/ 260gr Accubond and 375 yards.

A good friend of mine getting ready to take a shot at a Chuck at 1262 yards with his RD custom Tactical in 7mm WSM. Missed low by 4 inches. The spatter blew the chuck off the rock but when we went to confirm the kill we only found a couple little specks of blood from where the bullet disintegrated. So much for the longest shot of the year.

Without a body it doesn't count.

RailRob · « **Reply #1 on:** January 30, 2009, 10:11:23 PM »

how fun!!!!!!!

bowhunterforever · « **Reply #2 on:** January 30, 2009, 10:27:05 PM »

Man i am! I love rockchuck hunting with my 204!Even though i dont know where lots are!

Sage Weasel · « **Reply #3 on:** January 30, 2009, 10:35:10 PM »

Never shot chucks with the .204, I can't wait to though. I just built a AR15 in .204 for my younger brother this last fall, shot it a bit and it is a LAZER!. He is going to use it this spring for Chucks.

littlebuf · « **Reply #4 on:** January 30, 2009, 11:00:19 PM »

just barely had enough gun for that yote huh.

BaseballStud20 · « **Reply #5 on:** January 30, 2009, 11:10:55 PM »

Is that the .204 your talking about in the picture...the one you built?

Sage Weasel · « **Reply #6 on:** January 30, 2009, 11:17:37 PM »

Quote from: BaseballStud20 on January 30, 2009, 11:10:55 PM

Is that the .204 your talking about in the picture...the one you built?

Yes.....

Sage Weasel · « **Reply #7 on:** January 30, 2009, 11:23:18 PM »

Quote from: littlebuf on January 30, 2009, 11:00:19 PM

just barely had enough gun for that yote huh.

Oh yea.

The first picture above was the entrance side. I shot him from behind quartering away, the exit on the off side was right in the pocket. his heart was gone! Hanging somewhere in the sage.

Antlershed · « **Reply #8 on:** January 30, 2009, 11:30:33 PM »

Quote from: Sage Weasel on January 30, 2009, 10:35:10 PM

Never shot chucks with the .204, I can't wait to though. I just built a AR15 in .204 for my younger brother this last fall, shot it a bit and it is a LAZER!. He is going to use it this spring for Chucks.

Any specs on that .204?

dbllunger · « **Reply #9 on:** January 30, 2009, 11:31:27 PM »

Nice pics I love the gore. Thinking exactly the same thing today. Just tried to get some more R22 for my 7STW to get some 120's loaded up. Instead started on a batch of 500 22-250's with 55BT at 3600. Of course the powder was out of stock, but a case is supposed to be in next week. That thing will flat launch them, and you don't have any body left to photo. 120 Ballistic Tip at 3600 will do complete 1.5's aat 900, and triples easily at anything under 400. No rock needed.

Sage Weasel · « **Reply #10 on:** January 30, 2009, 11:44:55 PM »

" NO ROCK NEEDED " Only a true destroyer of Chucks would understand that

Love it!

Sage Weasel · « **Reply #11 on:** January 31, 2009, 12:04:59 AM »

Quote from: Antlershed on January 30, 2009, 11:30:33 PM

Quote from: Sage Weasel on January 30, 2009, 10:35:10 PM
Never shot chucks with the .204, I can't wait to though. I just built a AR15 in .204 for my younger brother this last fall, shot it a bit and it is a LAZER!. He is going to use it this spring for Chucks.

Any specs on that .204?

SNS Industries lower(Snohomish WA)

BushMaster lower parts kit with 2 stage match trigger.

CMT Upper with CMT bolt and bolt carrier group.

White Oak Armament 1-10 twist 26" Stainless heavy barrel assembly and gas block(1" under the hand guard .850@ Muzzle.

White Oak custom handguard.

MagPul darkearth CTR 6-Position stock, Miad grip and 30 round P-Mag.

This rifle held honest 5 shot 1-1 1/4 inch groups at 300 yards in no wind with factory Hornady 32gr V-Max ammo. I have since loaded up a bunch of different combo's with the 32gr and 40gr V-Max's and the 32gr Berger Match but have yet found the time to shoot them.

Sage Weasel · « **Reply #12 on:** January 31, 2009, 12:31:34 AM »

More Chucks!

Rem700 SPS .223 50gr BT.

Taking a rock nap.

My buddies AKA:CWcruiser's long range chuck destroyer(7mm WSM)

She loves Groundhogs!

bowhunterforever · « **Reply #13 on:** January 31, 2009, 12:55:00 AM »

Awsome pics!

How many on average do you kill when you go out?

Sage Weasel · « **Reply #14 on:** January 31, 2009, 01:29:12 AM »

Anywhere from 3-10 sometimes more, It's all about the weather, the grass and the sun. When the temp hits 100 it is all but over for the year. Some here and there, my personal best was 23 in about 20 minutes. That time I was shooting a Rem700 Sendero in .300 Win Mag with a Vais Arms muzzle brake, recoil was less than a .243. Let's just say on 20 power I could stay on my hits easily from about 80 yards out. I was running my favorite Chuck load which was a 180gr Nosler Ballistic Tip on top of 73gr of RL-19. A thunder cell had moved in while I was driving to my spot and it was raining like you wouldn't believe when I got there not a Chuck to be seen.

As soon as the cell blew through the sun was bright and those little beautiful fuzzy Ba^%$ds came out from everywhere! I set up and went to town, I knew I was abusing the barrel but since I had close to 2000 rounds on it already. I just smiled and keep whacking chucks, thinking to myself she's(The barrel) is pretty much about done any ways so let's finish her of with a bang. that barrel was smokin when I finished

. There were grounghogs splattered everywhere! I was in HEAVEN, I'll tell you what the hits were spectacular. Total aerials, I was sending chucks into orbit like the Apollo moon shot

that rifle easily killed 500-600 chucks during the years I shot with it. I miss than damn rifle

Sage Weasel · « **Reply #15 on:** January 31, 2009, 02:12:21 AM »

Another cartridge that is just wicked on chucks is the 6.5-284, I had McMillan build me a tactical, 9 twist, 6.5-284 with a 28" Schnieder barrel. I shot the 95gr V-max's and they were flat smokin

.It blew groundhogs to pieces. Here are some pictures of the 6.5's work. The second picture is a real monster of a Chuck he took it like a champ at around 300 yards. Sorry about the quality of the pics, they are digital pics of regular prints.

What's left of 5 Chucks.

Super Chuck soaked up a 95gr V-Max like a champ!

demontang · « **Reply #16 on:** January 31, 2009, 09:07:28 AM »

I have some 180gr NBT loaded for my .338 win and I'm thinking of getting a 243wssm upper for my AR which should do a job on chucks. I cleaned out an friends orchard and killed about 300 of them in a year, they have had any problems again yet and its been 3 years

. At work I have shot a few with pellet guns, talk about a change becuase some shots where 100yd's.

atomicjoe23 · « **Reply #17 on:** January 31, 2009, 09:39:10 AM »

Quote from: Sage Weasel on January 31, 2009, 12:31:34 AM

More Chucks!

My buddies AKA:CWcruiser's long range chuck destroyer(7mm WSM)

Is your buddies rifle a Surgeon rifle. . .it looks like one. . .$$$!!!

boneaddict · « **Reply #18 on:** January 31, 2009, 09:49:31 AM »

longtat is thinking

atomicjoe23 · « **Reply #19 on:** January 31, 2009, 10:17:07 AM »

I read about the 6.5-284 before and it sounded pretty impressive!!!

mossback91 · « **Reply #20 on:** January 31, 2009, 10:34:47 AM »

I'm gonna have to kill some chucks his spring for sure!! Ive only shot them with a 22 before though.......anybody got some red mist causing loads for 22-250?

demontang · « **Reply #21 on:** January 31, 2009, 11:05:35 AM »

The 40gr Nosler bt out of a 22-250 seemed to make the come apart, the 50gr noslers did a good job too. I have to say I have never seen one comapart like with the 180 noslers out of the .338 though

alanger · « **Reply #22 on:** January 31, 2009, 12:05:14 PM »

anyone in the coyote contest in wenatchee???

270Shooter · « **Reply #23 on:** January 31, 2009, 12:18:57 PM »

That .375 ultra mag is great on hides!

I wish i had a place to shoot chucks around here. I only see em at suntides golf course!

don't think they would like it if I went out there!

Sage Weasel · « **Reply #24 on:** January 31, 2009, 12:38:33 PM »

Atomicjoe23,

It is built on a Remington 700 Short Action, all the work was done by Randy Cain at http://www.rdprecision.net/.

atomicjoe23 · « **Reply #25 on:** January 31, 2009, 06:07:24 PM »

Quote from: Sage Weasel on January 31, 2009, 12:38:33 PM

Atomicjoe23,

It is built on a Remington 700 Short Action, all the work was done by Randy Cain at http://www.rdprecision.net/.

The stock looked an awful lot like a Surgeon rifle is why I asked. . .I like your M4 by the way. . .would love to have one myself, but I don't see it happening anytime in the near future. . .

Sage Weasel · « **Reply #26 on:** January 31, 2009, 08:06:18 PM »

Quote from: atomicjoe23 on January 31, 2009, 06:07:24 PM

Quote from: Sage Weasel on January 31, 2009, 12:38:33 PM
Atomicjoe23,

It is built on a Remington 700 Short Action, all the work was done by Randy Cain at http://www.rdprecision.net/.

The stock looked an awful lot like a Surgeon rifle is why I asked. . .I like your M4 by the way. . .would love to have one myself, but I don't see it happening anytime in the near future. . .

The stock is a AICS Chassis system, they are used by many different Tactical rifle builders. They are a "Drop in stock" for any Rem700, long or short action.

shoot-em-dead · « **Reply #27 on:** January 31, 2009, 10:03:56 PM »

I did that a little last summer. At first I didn't see the point but after nailing a couple at 200yds with my 22-250 I know I'll do it again. That was fun.

Antlershed · « **Reply #28 on:** January 31, 2009, 11:13:12 PM »

Quote from: Sage Weasel on January 31, 2009, 12:04:59 AM

SNS Industries lower(Snohomish WA)

BushMaster lower parts kit with 2 stage match trigger.

CMT Upper with CMT bolt and bolt carrier group.

White Oak Armament 1-10 twist 26" Stainless heavy barrel assembly and gas block(1" under the hand guard .850@ Muzzle.

White Oak custom handguard.

MagPul darkearth CTR 6-Position stock, Miad grip and 30 round P-Mag.

This rifle held honest 5 shot 1-1 1/4 inch groups at 300 yards in no wind with factory Hornady 32gr V-Max ammo. I have since loaded up a bunch of different combo's with the 32gr and 40gr V-Max's and the 32gr Berger Match but have yet found the time to shoot them.

Thanks! Provided I can ever find uppers and lowers, I may have just found an idea for my next build.

alanger · « **Reply #29 on:** February 04, 2009, 04:00:53 PM »

oo man.

makes me wanna get out there.

FrankDown · « **Reply #30 on:** February 05, 2009, 10:26:37 AM »

What kind of areas are best to look for chucks? As a kid I grew up shooting grey squirrels in the south, and liked hunting groundhogs inteh midwest.

News:

Advertisement

Author Topic: Who has the itch for some Rockchuck [Graphic Images] (Read 15516 times)

Advertisement

Quick Links

Recent Topics