collapse

Advertisement


Author Topic: Savage Axis barrel replacement  (Read 2128 times)

Offline jmscon

  • Forum Sponsor
  • Trade Count: (+7)
  • Sourdough
  • *****
  • Join Date: Nov 2015
  • Posts: 1215
  • Location: Seattle
  • RMEF BHA TRCP
Savage Axis barrel replacement
« on: January 17, 2017, 12:43:45 PM »
So, I have a Savage Axis in 30.06 that I won a few years back at the Puyallup sportsmans show in a raffle. I have been toying with the idea of putting a new heavier barrel on it. The current barrel consistently has fouling problems and shoots up and to the right in a three shot group. Grouping is typically 2" in a three shot group and I can't go through a 20 round box without the grouping opening up to 6" because of fouling.

I have been looking at Criterion barrels and just found Pac-Nor barrels. Any suggestions for a barrel? I figure I have $5 into this rifle so spending a little money on a barrel and a new stock will make it equivalent to a much higher priced rifle.

Using it for hunting big game only but I want to extend my comfort zone.

Any input is much appreciated!
My interpretation of the rules are open to interpretation.
Once I thought I was wrong but I was mistaken.

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: Savage Axis barrel replacement
« Reply #1 on: January 17, 2017, 12:49:38 PM »
Criterion over PAC-Nor, but only by a little.


Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1422
  • Location: Gig Harbor
Re: Savage Axis barrel replacement
« Reply #2 on: January 17, 2017, 12:56:33 PM »
Many barrel manufacturers make Savage Pre-Fits that will work on the Axis.  My personal prefits are made by Benchmark but Shilen, Criterion and others can meet your needs.  Many shooters are using X-caliber barrels out of Montana.  They seem to have an excellent reputation and at an attractive price.   

There are many videos on youtube that will get you pointed in the right direction on how to perform a barrel swap.
The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: Savage Axis barrel replacement
« Reply #3 on: January 17, 2017, 01:13:31 PM »
I got a x-caliber pre-fit on a savage. Haven't shot it a lot but first reloads i tried with it put 4 shots in a 1/2" at 100yds. Great barrel for the price. I got one on order for my tikka 300wsm.

Offline jmscon

  • Forum Sponsor
  • Trade Count: (+7)
  • Sourdough
  • *****
  • Join Date: Nov 2015
  • Posts: 1215
  • Location: Seattle
  • RMEF BHA TRCP
Re: Savage Axis barrel replacement
« Reply #4 on: January 17, 2017, 08:35:59 PM »
Thanks, I'm going to check out x-caliber!
My interpretation of the rules are open to interpretation.
Once I thought I was wrong but I was mistaken.

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: Savage Axis barrel replacement
« Reply #5 on: January 17, 2017, 08:48:57 PM »
I wish i would have bought a bunch of them when they were $200 for a contoured blank.

Offline jmscon

  • Forum Sponsor
  • Trade Count: (+7)
  • Sourdough
  • *****
  • Join Date: Nov 2015
  • Posts: 1215
  • Location: Seattle
  • RMEF BHA TRCP
Re: Savage Axis barrel replacement
« Reply #6 on: January 17, 2017, 09:26:49 PM »
Ok, another question. What are the advantages or disadvantages of faster or slower twist rates? Most common I've seen for 30.06 are 1:10 but 1:6 through 1:12 are available.
My interpretation of the rules are open to interpretation.
Once I thought I was wrong but I was mistaken.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Savage Axis barrel replacement
« Reply #7 on: January 17, 2017, 09:32:40 PM »
Question...did you ever go through a break in with this rifle?
Kindly do not attempt to cloud the issue with too many facts.

Offline jmscon

  • Forum Sponsor
  • Trade Count: (+7)
  • Sourdough
  • *****
  • Join Date: Nov 2015
  • Posts: 1215
  • Location: Seattle
  • RMEF BHA TRCP
Re: Savage Axis barrel replacement
« Reply #8 on: January 17, 2017, 09:42:45 PM »
Question...did you ever go through a break in with this rifle?

Yes, 100 rounds. Followed Savage's recommended process, shoot five then clean, shoot five then clean, shoot ten then clean. I don't think that was exactly it but I followed what Savage had on their website at the time. Had some pretty nice bruises after that range session! I have read that this the fouling and barrel heating is common with the axis.
My interpretation of the rules are open to interpretation.
Once I thought I was wrong but I was mistaken.

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: Savage Axis barrel replacement
« Reply #9 on: January 18, 2017, 09:41:54 AM »
Ok, another question. What are the advantages or disadvantages of faster or slower twist rates? Most common I've seen for 30.06 are 1:10 but 1:6 through 1:12 are available.

Different twist rates work better with different weight bullets. Figure out what bullet you want to shoot then determine the best twist rate for that bullet.  I'd probably set it up for the heaviest bullet you might shoot. With a slow twist heavy bullets may not stabilize (200gr with 1-12). With fast twist light bullets may be over spun but light bullets can shoot well in a fast twist.

If you go with a 1-10 i think you'll be fine with 150 up to  200 gr bullets.

 


* Advertisement

* Recent Topics

Hoof Rot by MADMAX
[Yesterday at 11:01:20 PM]


Ever win the WDFW Big Game Raffle? by addicted1
[Yesterday at 10:56:29 PM]


Honda BF15A Outboard Problems by Sandberm
[Yesterday at 08:18:08 PM]


Idaho General Season Going to Draw for Nonresidents by JDArms1240
[Yesterday at 08:16:36 PM]


Eastern WA-WT hunting from tree stands?? by addicted1
[Yesterday at 06:47:44 PM]


A question for any FFL holders on here by ryan2202
[Yesterday at 05:01:26 PM]


MA-10 Coho by CP
[Yesterday at 04:14:05 PM]


Bow mount trolling motors by BigGoonTuna
[Yesterday at 01:29:55 PM]


I’m on a blacktail mission by addicted1
[Yesterday at 12:10:11 PM]


where is everyone? by nwwanderer
[Yesterday at 06:01:04 AM]


Wolf documentary PBS by Skyvalhunter
[Yesterday at 05:58:56 AM]


Stuffed Pork Chop by EnglishSetter
[June 07, 2025, 11:12:59 PM]


Another great day in the turkey woods. by Remington Outdoors
[June 07, 2025, 09:43:57 PM]


Buck age by kentrek
[June 07, 2025, 08:56:47 PM]


Oregon special tag info by Judespapa
[June 07, 2025, 08:37:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal