collapse

Advertisement


Author Topic: 338-378 Weatherby Questions  (Read 36534 times)

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5623
Re: 338-378 Weatherby Questions
« Reply #75 on: March 18, 2020, 06:53:49 PM »
Finished developing load for Uncles 338-378 today.  113.0 gr RL 33.  300 SMK. 
2860-2870 fps.   

Was also load developing Lapua with HBN so targets cluttered.  The 338-378 are shots in lower left quadrant at 960 Yards in 6 mph wind. 

Best is neck-sized,  dip necks in liquid graphite (auto parts spray can) seat to just under mag length.

Offline bearpaw

  • Family, Friends, Outdoors
  • Administrator
  • Trade Count: (+10)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 38915
  • Location: Idaho<->Colville
  • "Rather Be Cougar Huntin"
    • http://www.facebook.com/DaleDenney
    • Bearpaw Outfitters
  • Groups: NRA, SCI, F4WM, NWTF, IOGA, MOGA, CCOC, BBB, RMEF, WSTA, WSB
Re: 338-378 Weatherby Questions
« Reply #76 on: March 18, 2020, 07:11:12 PM »
 :yeah: That's some good shooting  :tup:
Americans are systematically advocating, legislating, and voting away each others rights. Support all user groups & quit losing opportunity!

http://bearpawoutfitters.com Guided Hunts, Unguided, & Drop Camps in Idaho, Montana, Utah, and Wash. Hunts with tags available (no draw needed) for spring bear, fall bear, bison, cougar, elk, mule deer, turkey, whitetail, & wolf! http://trophymaps.com DIY Hunting Maps are also offered

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5623
Re: 338-378 Weatherby Questions
« Reply #77 on: April 20, 2020, 09:08:33 AM »
Finished tuning Uncles rifle today.  Had a little throat growth so bumped up to 113.5 RL33.
Cold bore at 966 yards.   2850-2870 node. 


Offline Matth

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2016
  • Posts: 563
  • Location: Battle ground
Re: 338-378 Weatherby Questions
« Reply #78 on: April 20, 2020, 01:26:29 PM »
Nice, i shoot just like that in my dreams.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5623
Re: 338-378 Weatherby Questions
« Reply #79 on: April 20, 2020, 01:37:04 PM »
Yea my uncles pretty stoked.   Hope new barrel on my Lapua will do as well. 

Offline Matth

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2016
  • Posts: 563
  • Location: Battle ground
Re: 338-378 Weatherby Questions
« Reply #80 on: April 20, 2020, 02:05:23 PM »
Does your uncles rifle have the factory barrel on it? My 340 shoots lights out with factory, barrel a bedding job, and trigger work.
The 338-378 is bone stock still, and shoots just like the 340 used to.
How many rounds did the HCA tube have prior to needing a new one?

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5623
Re: 338-378 Weatherby Questions
« Reply #81 on: April 20, 2020, 03:00:55 PM »
Yea factory barrel but quality bedding job and reworked trigger plus load development. 

Got about 900 rounds I think on Lapua.  Pushed it pretty hard and rushed cooling a few times.   30” proofs were in stock for $700 so decided to try that.   Like to shoot 2860.   Prob shuda gone Norma but Lapua’s done well.


Offline Matth

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2016
  • Posts: 563
  • Location: Battle ground
Re: 338-378 Weatherby Questions
« Reply #82 on: April 20, 2020, 03:19:03 PM »
Yea factory barrel but quality bedding job and reworked trigger plus load development. 

Got about 900 rounds I think on Lapua.  Pushed it pretty hard and rushed cooling a few times.   30” proofs were in stock for $700 so decided to try that.   Like to shoot 2860.   Prob shuda gone Norma but Lapua’s done well.

You and Mike almost had me talked into an HCA built Norma a while ago then i got the Weatherby to shoot. Now i have another MarkV to make shooy

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5623
Re: 338-378 Weatherby Questions
« Reply #83 on: April 20, 2020, 03:56:20 PM »
I bedded uncle’s and son’s 378-378’s and they both shoot at least as well as my custom Lapua, darn it.   I’m tweaking my bullet jump  .005- .020 and there’s is like 1/4 inch and kickin my tail.  Heh.  I think the older 338-378's had Bartlein Barrels.    At shorter ranges my Lapua is a little tighter but not by much.    Mite build a 300 wsm with 215 bergers for lighter plinking to a 1000. 
« Last Edit: April 20, 2020, 04:25:13 PM by Magnum_Willys »

Offline Matth

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2016
  • Posts: 563
  • Location: Battle ground
Re: 338-378 Weatherby Questions
« Reply #84 on: April 20, 2020, 08:48:32 PM »
Lighter plinking to a thousand Ha. Growing up hunting on the west side those are dirty words, but it is fun. When i talk to the rest of the family about it they think i'm crazy. Steven hunts with a muzzy so he just laughs at me. I hunt with a bow in Oregon so i'm super weird says my dad. I am fairly sure your correct about the barrels, my older 340 was easier to get shooting than the new 338-378, even prior to the aftermarket work.

 


* Advertisement

* Recent Topics

Idaho on the verge of outlawing by Tbar
[Today at 10:47:00 AM]


Four less by BeerBugler
[Today at 09:35:50 AM]


35 whelen by zwickeyman
[Today at 09:07:43 AM]


“Recreational trappers”? by Loup Loup
[Today at 08:59:35 AM]


Long Island Hunt by Sundance
[Today at 08:04:53 AM]


WA Bucket List….Mule Deer Permit by C-Money
[Today at 07:30:24 AM]


Furbearer research project, samples requested, by lewy
[Yesterday at 10:48:09 PM]


Nice bachelor herd by Dan-o
[Yesterday at 10:41:23 PM]


Coyote hunting with dogs by metlhead
[Yesterday at 08:39:32 PM]


GSP Breeders- looking for GSP puppy by SureThing
[Yesterday at 08:19:53 PM]


Such cool looking animals by Falcon
[Yesterday at 08:18:18 PM]


Big changes to skamania county boat launching by huntnnw
[Yesterday at 06:15:56 PM]


2027 Pink Run Destroyed by Happy Gilmore
[Yesterday at 02:25:10 PM]


Meet Kumpel by metlhead
[Yesterday at 12:04:28 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 12:14:09 AM]


Update repair complete Who knows Stihl messed up and cooked my 044 by Westside88
[December 19, 2025, 09:34:53 PM]


F150 Tire/Wheel Guys by elksnout
[December 19, 2025, 08:55:57 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal