collapse

Advertisement


Author Topic: Thinking about upgrading to CVA Accura V2™ Nitride....  (Read 4122 times)

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Thinking about upgrading to CVA Accura V2™ Nitride....
« on: July 01, 2018, 08:27:21 PM »
So after 8 years with a borrowed .54 cal Lyman I’d like to upgrade given the new law allowing 209 primers. My questions are, so I even need the NW version if I only plan on hunting in WA? Can I get the NW version and convert to the standard 209 primer breech plug (un-exposed)? Any help is greatly appreciated!

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1654
  • Location: United States
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #1 on: July 01, 2018, 08:31:19 PM »
I have that exact rifle.  Yes, you could get a NW legal and convert it but if you're only hunting WA, no need to buy the NW legal version.  Just buy the standard model that accepts 209 primers.   

If you wanted Blackhorn 209 powder, there is a separate breech plug you can buy that is optimized for that.  But otherwise just buy the standard model and use triple 7 powder or whatever powders are your favorite. 


Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #2 on: July 01, 2018, 08:53:15 PM »
Thanks, I appreciate the advice! I’ve been reading the reviews on muzzleloaders.com and they sound fairly unreliable on musket caps, I would think this would not be the case with 209’s?

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1654
  • Location: United States
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #3 on: July 01, 2018, 09:00:46 PM »
I didn't have too many issues with my Accura V2 with musket caps on reliability.  I think I had 2 non-fires (those were the caps, duds) and one hangfire out of all the years I had it as a NW legal.   Which given how wet it is in WA, that's not bad.

With Blachorn 209 I shoot my Accura quite a bit more than I did when it was NW legal.  Cleaner burning, more enjoyable for me to shoot.   Haven't had a single hangfire or non-fire with 209s either.  I'm sure I'll eventually get a dud 209 cap, but so far it's been great.     



Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #4 on: July 01, 2018, 10:07:59 PM »
That’s not bad at all, I’ve had times where it took 4-5 caps to go off, and many hang fires. My caps were older however.

Offline Myrtle Creek Inc.

  • God Bless
  • Business Sponsor
  • Trade Count: (0)
  • Hunter
  • *****
  • Join Date: Jul 2014
  • Posts: 136
  • Location: Oregon
  • Muzzle-Loaders.com
    • https://www.facebook.com/MuzzleLoaderscom
    • www.Muzzle-Loaders.com
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #5 on: July 03, 2018, 10:15:08 AM »
So after 8 years with a borrowed .54 cal Lyman I’d like to upgrade given the new law allowing 209 primers. My questions are, so I even need the NW version if I only plan on hunting in WA? Can I get the NW version and convert to the standard 209 primer breech plug (un-exposed)? Any help is greatly appreciated!

Also, keep in mind, if you buy the 209 version and eventually want to hunt in Oregon or Idaho, you can always buy the Musket components then. Your best bet is to probably buy the 209 version, as it will keep your costs down. The likelihood of you using the Musket components will be extremely low, as Oregon has also discussed changing to 209 in the near future.

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #6 on: July 03, 2018, 04:19:10 PM »
That’s what I’m thinking, if I get a wild hair to go there I can always take the Lyman if need be. It’s looking like muzzleloaders.com has the best price by far..

Offline GoexBlackhorn

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2015
  • Posts: 36
  • Location: Michigan, USA
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #7 on: July 04, 2018, 03:23:34 PM »
Get the 209 breechplug for that gun. Then get one of the three hottest primers. Hotter gives you better odds of fire in bad weather.

Weaker primers are fine in dry weather, plus they keep surrounding equipment cleaner. Here's three hot ones....

Federal 209A
CCI-M(ag).... not the regulars
Winchester 209 (blue box)
« Last Edit: July 04, 2018, 03:29:10 PM by GoexBlackhorn »

Offline zugbug

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Hunter
  • ***
  • Join Date: Sep 2011
  • Posts: 108
  • Location: Auburn, WA
  • Groups: RMEF, NRA
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #8 on: July 06, 2018, 01:38:12 PM »
Just bought my CVA Accura V2 from Muzzleloaders.com about a month ago.  Extremely happy with my purchase. 

Check the prices at https://www.budsgunshop.com

Muzzleloaders.com is good about matching prices if you find a gun cheaper somewhere else.
« Last Edit: July 06, 2018, 01:58:40 PM by zugbug »

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #9 on: July 07, 2018, 04:15:55 PM »
I wish you had commented about a day earlier, I ordered it Thursday night! Oh well, I only paid an extra $15. Looking forward to shooting it!

 


* Advertisement

* Recent Topics

CB Radio Hints and Tips, Installing guidance. by ghosthunter
[Today at 09:25:11 AM]


2025 blacktail rut thread by jamesfromseattle
[Today at 09:22:45 AM]


Cerakote by reloadxl650
[Today at 08:36:25 AM]


Hunting with a suppressor - dumb idea? by pickardjw
[Today at 08:27:14 AM]


New hunter looking for some help by GWP
[Today at 08:06:31 AM]


328/329 reports by Gentrys
[Today at 07:34:05 AM]


Restraining Order to Prevent Sherman Wolf Removal by hunter399
[Today at 07:20:48 AM]


Buck to Doe Ratio by hunter399
[Today at 05:03:34 AM]


GL Late Tag holders by JakeLand
[Today at 04:20:16 AM]


2025 elk success thread!! by Broomd
[Yesterday at 10:27:45 PM]


2025 deer, let's see em! by fowl smacker
[Yesterday at 09:42:13 PM]


2024 Ford Edge Opinion by mountainman
[Yesterday at 09:28:11 PM]


Pheasant Release Program by McCRIZZLEY
[Yesterday at 08:59:10 PM]


Kettle Range Moose by MADMAX
[Yesterday at 07:15:18 PM]


2025 Montana alternate list by CJ1962
[Yesterday at 07:12:50 PM]


Youth Idaho Brownlee Cow Tag by CJ1962
[Yesterday at 07:08:52 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by scottfrick
[Yesterday at 03:57:18 PM]


North Idaho 2025 Rifle Bull by ganghis
[Yesterday at 03:18:11 PM]


I bought this beater Win 06 as a scrapper outer, it turned into a fixer upper by bearhunter99
[Yesterday at 02:14:34 PM]


Any Luck With Used Dies ? by HereDuckyDucky
[Yesterday at 01:49:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal