collapse

Advertisement


Author Topic: Thinking about upgrading to CVA Accura V2™ Nitride....  (Read 4190 times)

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Thinking about upgrading to CVA Accura V2™ Nitride....
« on: July 01, 2018, 08:27:21 PM »
So after 8 years with a borrowed .54 cal Lyman I’d like to upgrade given the new law allowing 209 primers. My questions are, so I even need the NW version if I only plan on hunting in WA? Can I get the NW version and convert to the standard 209 primer breech plug (un-exposed)? Any help is greatly appreciated!

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1660
  • Location: United States
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #1 on: July 01, 2018, 08:31:19 PM »
I have that exact rifle.  Yes, you could get a NW legal and convert it but if you're only hunting WA, no need to buy the NW legal version.  Just buy the standard model that accepts 209 primers.   

If you wanted Blackhorn 209 powder, there is a separate breech plug you can buy that is optimized for that.  But otherwise just buy the standard model and use triple 7 powder or whatever powders are your favorite. 


Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #2 on: July 01, 2018, 08:53:15 PM »
Thanks, I appreciate the advice! I’ve been reading the reviews on muzzleloaders.com and they sound fairly unreliable on musket caps, I would think this would not be the case with 209’s?

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1660
  • Location: United States
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #3 on: July 01, 2018, 09:00:46 PM »
I didn't have too many issues with my Accura V2 with musket caps on reliability.  I think I had 2 non-fires (those were the caps, duds) and one hangfire out of all the years I had it as a NW legal.   Which given how wet it is in WA, that's not bad.

With Blachorn 209 I shoot my Accura quite a bit more than I did when it was NW legal.  Cleaner burning, more enjoyable for me to shoot.   Haven't had a single hangfire or non-fire with 209s either.  I'm sure I'll eventually get a dud 209 cap, but so far it's been great.     



Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #4 on: July 01, 2018, 10:07:59 PM »
That’s not bad at all, I’ve had times where it took 4-5 caps to go off, and many hang fires. My caps were older however.

Offline Myrtle Creek Inc.

  • God Bless
  • Business Sponsor
  • Trade Count: (0)
  • Hunter
  • *****
  • Join Date: Jul 2014
  • Posts: 136
  • Location: Oregon
  • Muzzle-Loaders.com
    • https://www.facebook.com/MuzzleLoaderscom
    • www.Muzzle-Loaders.com
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #5 on: July 03, 2018, 10:15:08 AM »
So after 8 years with a borrowed .54 cal Lyman I’d like to upgrade given the new law allowing 209 primers. My questions are, so I even need the NW version if I only plan on hunting in WA? Can I get the NW version and convert to the standard 209 primer breech plug (un-exposed)? Any help is greatly appreciated!

Also, keep in mind, if you buy the 209 version and eventually want to hunt in Oregon or Idaho, you can always buy the Musket components then. Your best bet is to probably buy the 209 version, as it will keep your costs down. The likelihood of you using the Musket components will be extremely low, as Oregon has also discussed changing to 209 in the near future.

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #6 on: July 03, 2018, 04:19:10 PM »
That’s what I’m thinking, if I get a wild hair to go there I can always take the Lyman if need be. It’s looking like muzzleloaders.com has the best price by far..

Offline GoexBlackhorn

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2015
  • Posts: 36
  • Location: Michigan, USA
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #7 on: July 04, 2018, 03:23:34 PM »
Get the 209 breechplug for that gun. Then get one of the three hottest primers. Hotter gives you better odds of fire in bad weather.

Weaker primers are fine in dry weather, plus they keep surrounding equipment cleaner. Here's three hot ones....

Federal 209A
CCI-M(ag).... not the regulars
Winchester 209 (blue box)
« Last Edit: July 04, 2018, 03:29:10 PM by GoexBlackhorn »

Offline zugbug

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Hunter
  • ***
  • Join Date: Sep 2011
  • Posts: 109
  • Location: Auburn, WA
  • Groups: RMEF, NRA
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #8 on: July 06, 2018, 01:38:12 PM »
Just bought my CVA Accura V2 from Muzzleloaders.com about a month ago.  Extremely happy with my purchase. 

Check the prices at https://www.budsgunshop.com

Muzzleloaders.com is good about matching prices if you find a gun cheaper somewhere else.
« Last Edit: July 06, 2018, 01:58:40 PM by zugbug »

Offline MrE4853

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2017
  • Posts: 31
  • Location: Orting
  • Groups: NRA, SCI
Re: Thinking about upgrading to CVA Accura V2™ Nitride....
« Reply #9 on: July 07, 2018, 04:15:55 PM »
I wish you had commented about a day earlier, I ordered it Thursday night! Oh well, I only paid an extra $15. Looking forward to shooting it!

 


* Advertisement

* Recent Topics

Montana Cutting Deer Licenses by MADMAX
[Today at 04:41:40 AM]


The Hunt for a Next level buck… by freezerfull
[Yesterday at 11:15:50 PM]


Shooting someone else's injured buck - etiquette question by Scruffy
[Yesterday at 10:59:53 PM]


Idaho on the verge of outlawing by EnglishSetter
[Yesterday at 10:00:14 PM]


Idaho or Colorado application for next year? Both? by highside74
[Yesterday at 10:00:11 PM]


The Lookback by Pathfinder101
[Yesterday at 09:31:32 PM]


Put a ring on it by Pathfinder101
[Yesterday at 09:29:20 PM]


Ice fishing for walleye by buglebuster
[Yesterday at 09:13:10 PM]


2025 elk success thread!! by buglebuster
[Yesterday at 09:07:34 PM]


Idaho Non-res hunt draw by Big6bull
[Yesterday at 09:01:05 PM]


Homemade saltwater fishing gear by NorseNW
[Yesterday at 08:51:32 PM]


Blackstone newbie by Remnar
[Yesterday at 08:13:40 PM]


Aluminum boat bottom repair recommendations by ChesapeakeMan
[Yesterday at 07:31:51 PM]


Who knows electric bikes? looking at Quietkat options by JakeLand
[Yesterday at 05:46:56 PM]


Really would you send your dog? by Kingofthemountain83
[Yesterday at 05:43:42 PM]


Long shot by Kingofthemountain83
[Yesterday at 05:34:41 PM]


Pack/ backpack to carry a folding long and edc etc.? by Sakko300wsm
[Yesterday at 03:50:51 PM]


Kubota repair shop by Ridgeratt
[Yesterday at 10:29:47 AM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Yesterday at 09:34:17 AM]


GM 6.6l gas 6 speed vs. 10 speed? by Happy Gilmore
[Yesterday at 12:51:24 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal