collapse

Advertisement


Author Topic: reloading for the perfect round?  (Read 2345 times)

Offline shoot-em-dead

  • non-yar
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 2533
  • Location: yacolt
reloading for the perfect round?
« on: March 27, 2009, 05:20:14 PM »
I reloaded some shells for my 300. 110 grain bullets and 6 shells each at different charges from 33grains to 37 grains in 1 grain increments. My groups were all about the same. How do you decide what to load for from here as I don't really see much difference in the groups? PS It sure was nice to shoot the gun with hardly any recoil.
This closet is taken- go find your own

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: reloading for the perfect round?
« Reply #1 on: March 27, 2009, 05:48:51 PM »
I would pick the one that is the fastest, the 37gr if it shows no signs of excess pressure will shoot flatter, and carry more energy that the lighter loads.


AWS
After the first shot the rest are just noise.

Make mine a Minaska

Offline Crisptrigr

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 43
  • Location: Western WA
Re: reloading for the perfect round?
« Reply #2 on: March 27, 2009, 06:37:36 PM »
What is your rifle? What is your caliber? What purpose will your handloads be used for? What are your goals for working up these loads?

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: reloading for the perfect round?
« Reply #3 on: March 27, 2009, 07:29:20 PM »
If I am trying to perfect a load that is already grouping consistent, the first step is weighing my bullets, more than 1/2 of a grain either way, and they go in a seperate box for other loadings.

By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline shoot-em-dead

  • non-yar
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 2533
  • Location: yacolt
Re: reloading for the perfect round?
« Reply #4 on: March 27, 2009, 08:49:22 PM »
What is your rifle? What is your caliber? What purpose will your handloads be used for? What are your goals for working up these loads?

My rifle is a Savage .300 win mag, I'd like to get a load built up for a backup coyote gun ( have a freind that doesn't have a rifle yet or much interest in coyote hunting and I'd like to get him into it) and I would like to get a load that is more deer freindly than 180gr.
This closet is taken- go find your own

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39181
  • Location: Rochester
    • robert68
Re: reloading for the perfect round?
« Reply #5 on: March 27, 2009, 08:52:21 PM »
What is your rifle? What is your caliber? What purpose will your handloads be used for? What are your goals for working up these loads?

My rifle is a Savage .300 win mag, I'd like to get a load built up for a backup coyote gun ( have a freind that doesn't have a rifle yet or much interest in coyote hunting and I'd like to get him into it) and I would like to get a load that is more deer freindly than 180gr.

The 110 surely won't be more "deer friendly."  And if you shoot a coyote with it there won't be anything left. Unless you load it way down to minimum velocities. In my opinion the 180 grain is the perfect weight bullet for deer out of a 300 mag. You just need to go to a harder bullet, or slow it down some. Try a Nosler Accubond in 180 grain. Or if you want to go a bit lighter than that for less recoil, try a 165 grain Barnes.

Offline Gutpile

  • Gaseous horribulous stinkusis
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2008
  • Posts: 4478
  • Location: Spokane Valley
    • https://www.facebook.com/mark.farrell.142?ref=tn_tnmn
Re: reloading for the perfect round?
« Reply #6 on: March 27, 2009, 08:54:30 PM »
I would pick the one that is the fastest, the 37gr if it shows no signs of excess pressure will shoot flatter, and carry more energy that the lighter loads.


AWS

Me too

Y.A.R. Gold Member

Offline littlebuf

  • official YAR pack mule
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 2773
  • Location: orting
  • TeamYARwetspot-leavin other teams in da wetspot
Re: reloading for the perfect round?
« Reply #7 on: March 27, 2009, 09:26:55 PM »
you should really load 5 of each of those charges and then shoot them in 5 shot groups ( one of each charge to make up your 5 shots) mark them on a target on your bench with different color marker and by the end you will see what charge grouped the best. called the ladder test and i got my 300 shooting clover leafs at 200 yards with it
No people will tamely surrender their Liberties, nor can any be easily subdued, when knowledge is diffused and Virtue is preserved. On the Contrary, when People are universally ignorant, and debauched in their Manners, they will sink under their own weight without the Aid of foreign Invaders.

 


* Advertisement

* Recent Topics

KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 10:58:10 AM]


Oregon special tag info by Judespapa
[Today at 10:56:27 AM]


MA-10 Coho by Sneaky
[Today at 10:53:12 AM]


DR Brush Mower won't crank by Rob
[Today at 10:19:24 AM]


Ever win the WDFW Big Game Raffle? by Big6bull
[Today at 10:10:07 AM]


Ground blind for blacktail by kyle_higg
[Today at 10:09:34 AM]


Bow mount trolling motors by Angry Perch
[Today at 09:50:16 AM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Today at 09:12:31 AM]


10 kokes by 206
[Today at 07:51:31 AM]


Hoof Rot by fowl smacker
[Today at 06:28:53 AM]


Honda BF15A Outboard Problems by Sandberm
[Yesterday at 08:18:08 PM]


Idaho General Season Going to Draw for Nonresidents by JDArms1240
[Yesterday at 08:16:36 PM]


Eastern WA-WT hunting from tree stands?? by addicted1
[Yesterday at 06:47:44 PM]


A question for any FFL holders on here by ryan2202
[Yesterday at 05:01:26 PM]


I’m on a blacktail mission by addicted1
[Yesterday at 12:10:11 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal