collapse

Advertisement


Author Topic: Bait Casting Reels, Old vs. New  (Read 2727 times)

Offline salish

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2009
  • Posts: 658
Bait Casting Reels, Old vs. New
« on: June 03, 2019, 08:35:34 AM »
Hello,

I recently pulled out two old bait casting reels I haven't used in over 20 years. I used these reels for winter steelheading and couldn't seem to become proficient with them and eventually moved to a spinning reel. I thought I'd give these reels another try with bass gear. Still having issues with birds nests in casts no matter how much I play with the controls on the reels.

My question is this, do modern bait casting reels still have issues with backlash or had someone invented a "backlash free" reel? My two reels are the Quantum 1310 & 1410 reels which were decent reels in 1995.

Thanks
Cliff

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 13148
  • Location: Arlington
Re: Bait Casting Reels, Old vs. New
« Reply #1 on: June 03, 2019, 08:39:04 AM »
You can make almost any reel backlash free, but it won't cast very far.  You can adjust tension on the reel which prevents it from spinning freely, thus it won't overspin.  For most reels, you adjust them to match whatever weight you are casting and then learn how to cast and use your thumb to control the spool.  It just takes practice.

Offline Old Man Yager

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 2046
  • Location: Puyallup, WA. USA
  • Groups: NRA, PRHAA
Re: Bait Casting Reels, Old vs. New
« Reply #2 on: June 03, 2019, 08:54:59 AM »
I make plenty of birds nest on my newer reel.  :chuckle:
My Dad always said, " Get a bigger hammer "

Offline Dhoey07

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Sep 2011
  • Posts: 3354
  • Location: Parts Unknown
    • No Facebook for this guy
Re: Bait Casting Reels, Old vs. New
« Reply #3 on: June 03, 2019, 09:11:48 AM »
I use those reels exclusively for salmon/steelhead.  I've even purchased a few off eBay for backups.  They're solid reels that don't quit.

 Do you know how to adjust the spool tension?

Offline kisfish

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2012
  • Posts: 713
  • Location: on the coast
  • Groups: nra
Re: Bait Casting Reels, Old vs. New
« Reply #4 on: June 03, 2019, 10:49:04 AM »
For me it took practice, practice , practice. I  would get birds nest allot when I started with casters. I think everyone does. A very common mistake is people try to whip it out there a country mile. A nice even steady cast will work the best and then start playing with the drag.   I was on the water or boat at least 70 times a year back in the day and just threw my caster on a regular basis. That's almost all I cast with anymore and all my favorite reels are from the 90's. I love my browning citori bait casters.   

Offline salish

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2009
  • Posts: 658
Re: Bait Casting Reels, Old vs. New
« Reply #5 on: June 03, 2019, 11:22:01 AM »
Thanks guys, that pretty much answers my question, and I appreciate all of your advice. And I do know how to adjust the spool tension and brakes. It just boils down to having patience on my part. I'll keep in trying my reels and see if I can overcome my backlash problems. Thank you.

Offline Bullkllr

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 4943
  • Location: Graham
Re: Bait Casting Reels, Old vs. New
« Reply #6 on: June 03, 2019, 11:33:07 AM »
Make sure you practice with a reasonable weight. Most backlashes come from trying to throw too light a weight too far a distance before the thumb is fully coordinated.

Start practicing with 1/2 -3/4 ounce practice weight and go from there. A shorter rod- like a bass rod- is easier to practice with than standard salmon/steelhead lengths also ime.
Charlie Kirk didn't speak hate, they hated what he said. Don't get it twisted.

Offline Skyvalhunter

  • Washington For Wildlife
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Oct 2007
  • Posts: 16013
  • Location: Sky valley/Methow
Re: Bait Casting Reels, Old vs. New
« Reply #7 on: June 03, 2019, 11:50:38 AM »
What happened to the good old Mitchell 300 days?  :chuckle:
The only man who never makes a mistake, is the man who never does anything!!
The further one goes into the wilderness, the greater the attraction of its lonely freedom.

Offline 6haase6

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Sep 2012
  • Posts: 784
  • Location: Odessa Washington
Re: Bait Casting Reels, Old vs. New
« Reply #8 on: June 03, 2019, 11:56:17 AM »
The way my buddy started me was adjust your reel so that when you push the button and just hold your rod at a 45 your lure will fall at moderate pace. Also on your cast follow your lure with the rod tip. Then you can start fine tuning your reel.
Slinging arrows and flinging lead is in my blood!

Offline salish

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2009
  • Posts: 658
Re: Bait Casting Reels, Old vs. New
« Reply #9 on: June 03, 2019, 06:43:25 PM »
Bullkllr & 6haase6, great advice, thanks. I did find an old casting practice plug and added some weight to it. I'll be working with it.

Offline Dhoey07

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Sep 2011
  • Posts: 3354
  • Location: Parts Unknown
    • No Facebook for this guy
Re: Bait Casting Reels, Old vs. New
« Reply #10 on: June 03, 2019, 07:36:45 PM »
If you give up on them, let me know.

They’re good reels. Think about casting as a “toss” and not a “whip”.

Offline salish

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2009
  • Posts: 658
Re: Bait Casting Reels, Old vs. New
« Reply #11 on: June 03, 2019, 08:11:17 PM »
 Will do, thanks.

Offline KopperBuck

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 1910
  • Location: GRV
Bait Casting Reels, Old vs. New
« Reply #12 on: June 03, 2019, 11:39:31 PM »
Has a lot to do with the rod. Stiffer sticks require more throw (depending) which almost guarantees a fuzz up. Also, lighter action rods people throw too hard (let the rod do the work) and creates the same issue.

There is no fix - it’s all about practice and touch. Lots of factors as mentioned. The reel is only part of the larger equation - weight of lure, weight/type of line, how far you need to cast, how you cast, wind, etc.


Sent from my iPhone using Tapatalk

Offline KopperBuck

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 1910
  • Location: GRV
Re: Bait Casting Reels, Old vs. New
« Reply #13 on: June 03, 2019, 11:58:49 PM »
If you give up on them, let me know.

They’re good reels. Think about casting as a “toss” and not a “whip”.
Reminds me of the first time I combat fished while in college. I wanted to side arm and whip it - i could and can drop it in a drinking glass. But being that close it wasn’t going to happen. To this day I still can’t lob shizz.


Sent from my iPhone using Tapatalk

Offline branches

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2014
  • Posts: 415
  • Location: Olympia,Wa
Re: Bait Casting Reels, Old vs. New
« Reply #14 on: June 04, 2019, 08:00:43 PM »
lure weight and line diameter will determine how well you can cast. Practice, Practice, and Practice will get you confident and get your results with the bait caster. Go in the back yard and  try to cast into a 5 gallon bucket at different distances. :tup:

 


* Advertisement

* Recent Topics

2024 Ford Edge Opinion by C-Money
[Today at 05:06:35 PM]


2025 deer, let's see em! by Buck Rub Jr
[Today at 04:50:52 PM]


Kettle Range Moose by Elkpiss
[Today at 04:27:16 PM]


Buck to Doe Ratio by GOcougsHunter
[Today at 04:01:03 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by scottfrick
[Today at 03:57:18 PM]


Hunting with a suppressor - dumb idea? by HereDuckyDucky
[Today at 03:41:28 PM]


North Idaho 2025 Rifle Bull by ganghis
[Today at 03:18:11 PM]


I bought this beater Win 06 as a scrapper outer, it turned into a fixer upper by bearhunter99
[Today at 02:14:34 PM]


Any Luck With Used Dies ? by HereDuckyDucky
[Today at 01:49:07 PM]


Getting the hang of hanging on to mallards! by Goshawk
[Today at 12:51:19 PM]


CB Radio Hints and Tips, Installing guidance. by Naches Sportsman
[Today at 11:18:07 AM]


It was a great year by WAcoueshunter
[Today at 11:03:58 AM]


I broke down and bought a by ASHQUACK
[Today at 10:24:33 AM]


GM 6.6l gas 6 speed vs. 10 speed? by Sandberm
[Today at 10:11:11 AM]


Youth Idaho Brownlee Cow Tag by Buckjunkie
[Today at 09:41:57 AM]


Calling Cougars? by Deer slayer
[Today at 09:30:19 AM]


Pathfinder's Opening Day Deer by Bob33
[Today at 09:24:19 AM]


Lost - Swarovski EL Range 10x42 Skamania County by Atlas1993
[Today at 09:16:16 AM]


F150 Ecoboost Guys by JohnVH
[Today at 09:14:07 AM]


My first blacktail! by JohnVH
[Today at 09:09:48 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal