collapse

Advertisement


Author Topic: CVA Accura V2 ignition question  (Read 2900 times)

Offline salmon

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 105
  • Location: Gig Harbor
CVA Accura V2 ignition question
« on: June 22, 2019, 02:35:25 PM »
Went with son to shoot new ML with Triple 7 2ff and 100 grs of powder using CCI Musket caps. From the start we had trouble with ignition even after just firing. Used original nipple with gun. Was wondering if not enough flame getting to powder. Has anyone else had this problem, has anyone else used a different nipple. Any thoughts or ideas?

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1635
  • Location: United States
Re: CVA Accura V2 ignition question
« Reply #1 on: June 22, 2019, 03:26:00 PM »
I used RWS musket caps for the NW Legal setup (am on 209 now) without issues.  Never tried CCI

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4523
  • Location: Wet side
Re: CVA Accura V2 ignition question
« Reply #2 on: June 23, 2019, 12:10:58 AM »
Swap it to a 209 it’s about $30 and problem solved

Offline bkaech

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2018
  • Posts: 329
  • Location: Puyallup
  • Groups: BHA, RMEF, NRA
Re: CVA Accura V2 ignition question
« Reply #3 on: June 23, 2019, 06:35:29 AM »
I can't imagine its a problem with the nipple. If the cap is firing but not igniting the powder the problem is either week caps. Everyone I have ever talked to says the RWS musket caps are best and the only ones I've used. OR the problem is the powder....it is really easy to contaminate powder, it collects moisture if old, in humid environment, gets handled or touched with fingers or oils, barrel is not dry and clean, if you keep cleaning the barrel and leaving even a small amount of moisture in the barrel it can containment your powder.

If it was me I would buy RWS caps and try that, easy and cheap. Also I would think about the powder and making sure no oils or moisture was inside my barrel. But I would bet its bad caps.

Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10679
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: CVA Accura V2 ignition question
« Reply #4 on: June 23, 2019, 08:44:47 AM »
Went with son to shoot new ML with Triple 7 2ff and 100 grs of powder using CCI Musket caps. From the start we had trouble with ignition even after just firing. Used original nipple with gun. Was wondering if not enough flame getting to powder. Has anyone else had this problem, has anyone else used a different nipple. Any thoughts or ideas?
were the caps actually popping?
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 571
  • Location: Boncarbo Colorado
Re: CVA Accura V2 ignition question
« Reply #5 on: June 23, 2019, 08:46:11 AM »
cci musket caps are usually re enactment caps made for blanks.

Offline salmon

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 105
  • Location: Gig Harbor
Re: CVA Accura V2 ignition question
« Reply #6 on: June 23, 2019, 09:09:05 PM »
Hello Guys, Thanks for all your help. I'm a real dummy, checked cap box and they are reenactment caps. Bet next time will be better.

Offline OutHouse

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jul 2015
  • Posts: 3304
  • Location: Cowiche WA
  • Department of Foliage, Lifetime Member
Re: CVA Accura V2 ignition question
« Reply #7 on: June 25, 2019, 05:50:20 PM »
Hello Guys, Thanks for all your help. I'm a real dummy, checked cap box and they are reenactment caps. Bet next time will be better.

I would still be weary of CCI caps. I use a traditional style hawken and routinely had problems with those either not igniting the powder or not exploding at all. Made sure nipple was clear and made other adjustments but they still had issues. I changed to Remington caps and they have always worked well.

 


* Advertisement

* Recent Topics

New to bear hunting by JimmyHoffa
[Yesterday at 10:39:22 PM]


AUCTION: Custom knife by Alden Cole by teanawayslayer
[Yesterday at 10:04:12 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by DeerSkin
[Yesterday at 10:01:25 PM]


Spot lock in the salt? by hunthard
[Yesterday at 09:38:57 PM]


Best all around muzzy (updated) by riverrun
[Yesterday at 09:17:25 PM]


Honda BF15A Outboard Problems - FIXED! by 30.06
[Yesterday at 09:04:01 PM]


49 Degrees North Early Bull Moose by 6haase6
[Yesterday at 08:59:22 PM]


GPW Trail Closures by Kascade_Killer
[Yesterday at 08:34:19 PM]


Bonaparte Lake by Birdguy
[Yesterday at 08:26:21 PM]


More Kings! by Stein
[Yesterday at 06:06:46 PM]


2025 Crab! by Stein
[Yesterday at 03:05:47 PM]


Air Dryer Cherries by Stein
[Yesterday at 02:59:12 PM]


Boundary Waters walleye trip by jackelope
[Yesterday at 02:08:52 PM]


Sockeye Numbers by Southpole
[Yesterday at 10:08:15 AM]


Winchester model 97 will not cycle by mudflat mike
[Yesterday at 09:29:17 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal