collapse

Advertisement


Author Topic: ADG Brass  (Read 1307 times)

Offline Tenkara

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2015
  • Posts: 863
ADG Brass
« on: January 10, 2021, 10:51:28 AM »
Anyone have any input them? im thinking about ordering some.

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4970
  • Location: Puyallup
Re: ADG Brass
« Reply #1 on: January 10, 2021, 11:04:35 AM »
I am on the 2nd firing of ADG brass and so far I very pleased.  An improvement over the Norma brass I was using.  It is thicker and heavier brass than Norma, so I suspect less volume, but performance has been good.

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1166
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: ADG Brass
« Reply #2 on: January 10, 2021, 11:05:16 AM »
It's GTG.  You'll probably need to decrease the powder charge you've been using and regular annealing is VERY beneficial (critical) for maintaining consistent neck tension.
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3317
  • Location: Spokane Wa.
Re: ADG Brass
« Reply #3 on: January 10, 2021, 12:20:13 PM »
I've also heard it's sometimes a little smaller on case volume and I think ADG even says something about this too.  Also been told by guys that have used it quite a lot it's pretty tough stuff and you can stand on it fairly hard without it giving up primer pockets which is good but can also be bad if you get drunk on chasing velocity too.

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: ADG Brass
« Reply #4 on: January 20, 2021, 08:42:33 PM »
It took seven firings with ADG .300 Win Mag brass before I had to kiss the shoulder with a die. Excellent stuff!
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

 


* Advertisement

* Recent Topics

DR Clips and Braided Mainline by metlhead
[Today at 02:46:10 PM]


New bear hunter questions! by TitusFord
[Today at 02:40:45 PM]


2025 Montana alternate list by TT13
[Today at 02:23:51 PM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 01:54:31 PM]


Heartbroken!!! by pianoman9701
[Today at 01:27:20 PM]


Best 20 degree and under sleeping bags? by vandeman17
[Today at 01:08:24 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Today at 01:03:07 PM]


Got your bear ID test done..🤟 by finnman
[Today at 12:55:32 PM]


Muckleshoot/white river forest hunting permits by jnichols
[Today at 12:36:40 PM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Today at 12:23:22 PM]


More Kings! by CP
[Today at 12:03:59 PM]


Eastern Gray Squirrels by Elk_Guapo
[Today at 10:56:17 AM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Today at 10:52:21 AM]


Pork belly street tacos….. by pianoman9701
[Today at 08:47:20 AM]


Hoof Rot by Rugergunsite308
[Today at 08:45:58 AM]


2025 Canning by 3boys
[Today at 08:40:04 AM]


Muzzleloader scope options by dc
[Today at 06:21:44 AM]


10 years ago- Now by blindluck
[Today at 06:18:02 AM]


Muzzleloader Scope by trophyhunt
[Today at 06:10:23 AM]


Idaho's new Deer/Elk License System by dvolmer
[Yesterday at 10:11:48 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal