collapse

Advertisement


Author Topic: 30-06 and RL22 or H4381  (Read 2156 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 488
  • Location: Whatcom County
30-06 and RL22 or H4381
« on: April 26, 2021, 07:27:33 AM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

« Last Edit: April 26, 2021, 07:44:07 AM by wooltie »

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8920
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: 30-06 and RL22 or H4381
« Reply #1 on: April 26, 2021, 10:44:04 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?
Official hunt-wa bigfoot field researcher!

Offline jeffitz

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 342
  • Location: SW WA
Re: 30-06 and RL22 or H4381
« Reply #2 on: April 26, 2021, 11:06:42 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?


Same here- compressed RL22 (cant remember exact grain amount at the moment) with the 168 Nosler Ballistic Tip - shoots good out of my old Ruger.
If you're gonna be dumb,you gotta be tough.

Offline HooknoseHunter

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 121
  • Location: Stevens County
Re: 30-06 and RL22 or H4381
« Reply #3 on: April 26, 2021, 05:37:30 PM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

I use 59.0 grains of RL22 behind a 180gr Speer Hot Cor in my 30-06 and it’s extremely accurate.

Offline MeatMissile

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Jun 2018
  • Posts: 277
Re: 30-06 and RL22 or H4381
« Reply #4 on: April 27, 2021, 11:14:11 PM »
180 and 200gr bullets, a 24-26 inch barrel, and H4831 has worked well for me in the 30-06. 

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1982
Re: 30-06 and RL22 or H4381
« Reply #5 on: April 28, 2021, 06:51:01 AM »
62 of R22 behind a 165 accubond.  Accurate and Fast!  Been wanting to try 178 ELDX but supply is low.

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 488
  • Location: Whatcom County
Re: 30-06 and RL22 or H4381
« Reply #6 on: April 28, 2021, 09:46:23 AM »
Thanks for the input.  Maybe I'll increase the load and see what that does, although I'm getting good velocity at lower weights. 

Could always try some 165s too.  Getting 2750 fps on 180g at 58.0g RL22...

 


* Advertisement

* Recent Topics

Laser engraving service in western washington by Goshawk
[Today at 09:35:51 AM]


2026 turkey season! by pickardjw
[Today at 09:22:39 AM]


Big game season proposals by GOcougsHunter
[Today at 08:37:47 AM]


Delay of commission investigation+Lorna Smith finally defending hunting??? by TriggerMike
[Today at 08:34:51 AM]


Solar Generator by CP
[Today at 08:04:30 AM]


Any fans of the 35 Rem, 358 Win, 35 Whelen, 9.3x62, or 45-70? by GWP
[Today at 07:45:19 AM]


You Bear Slayers by bowman
[Today at 07:24:11 AM]


Turkey Fan/beard Plaques by fire*guy
[Today at 07:13:53 AM]


Spring Idaho by bearpaw
[Today at 06:06:31 AM]


Discretion !!! by JDHasty
[Today at 01:10:05 AM]


12th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Yesterday at 10:19:11 PM]


Multi season elk by trophyhunt
[Yesterday at 08:20:51 PM]


Hoof rot by trophyhunt
[Yesterday at 07:59:40 PM]


Second Choice by CNELK
[Yesterday at 07:19:34 PM]


Question about hunting wilderness areas by Shawn Ryan
[Yesterday at 06:32:30 PM]


Now we wait(Montana) by huntandjeep
[Yesterday at 04:49:46 PM]


AR-15 and more by pianoman9701
[Yesterday at 03:13:21 PM]


Manulife Timberlands closed in NE Washington by shorthair15
[Yesterday at 02:23:42 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal