collapse

Advertisement


Author Topic: 30-06 and RL22 or H4381  (Read 2115 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 488
  • Location: Whatcom County
30-06 and RL22 or H4381
« on: April 26, 2021, 07:27:33 AM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

« Last Edit: April 26, 2021, 07:44:07 AM by wooltie »

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8920
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: 30-06 and RL22 or H4381
« Reply #1 on: April 26, 2021, 10:44:04 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?
Official hunt-wa bigfoot field researcher!

Offline jeffitz

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 342
  • Location: SW WA
Re: 30-06 and RL22 or H4381
« Reply #2 on: April 26, 2021, 11:06:42 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?


Same here- compressed RL22 (cant remember exact grain amount at the moment) with the 168 Nosler Ballistic Tip - shoots good out of my old Ruger.
If you're gonna be dumb,you gotta be tough.

Offline HooknoseHunter

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 121
  • Location: Stevens County
Re: 30-06 and RL22 or H4381
« Reply #3 on: April 26, 2021, 05:37:30 PM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

I use 59.0 grains of RL22 behind a 180gr Speer Hot Cor in my 30-06 and it’s extremely accurate.

Offline MeatMissile

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Jun 2018
  • Posts: 271
Re: 30-06 and RL22 or H4381
« Reply #4 on: April 27, 2021, 11:14:11 PM »
180 and 200gr bullets, a 24-26 inch barrel, and H4831 has worked well for me in the 30-06. 

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1975
Re: 30-06 and RL22 or H4381
« Reply #5 on: April 28, 2021, 06:51:01 AM »
62 of R22 behind a 165 accubond.  Accurate and Fast!  Been wanting to try 178 ELDX but supply is low.

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 488
  • Location: Whatcom County
Re: 30-06 and RL22 or H4381
« Reply #6 on: April 28, 2021, 09:46:23 AM »
Thanks for the input.  Maybe I'll increase the load and see what that does, although I'm getting good velocity at lower weights. 

Could always try some 165s too.  Getting 2750 fps on 180g at 58.0g RL22...

 


* Advertisement

* Recent Topics

Shake down time.... What's in your elk pack? by mburrows
[Today at 07:40:15 AM]


turkey hunting series question 9 - preparation for April by birddogdad
[Today at 07:32:15 AM]


Springer season getting close, who's going by Martinhunter
[Today at 12:00:27 AM]


Heavy metal (Kenworth C500's) by 3boys
[Yesterday at 10:33:44 PM]


European skull personalized wall state mounts by fire*guy
[Yesterday at 07:40:56 PM]


Muzzleloader Supplies by MADMAX
[Yesterday at 06:55:09 PM]


Custom rifles by Sakko300wsm
[Yesterday at 05:27:09 PM]


Beaver OK for Lent by Kingofthemountain83
[Yesterday at 05:13:50 PM]


Blacktail Trophy Tactics Hunting Event: Free for Veterans/Active Duty by silverdalesauer
[Yesterday at 04:29:58 PM]


RV floor repair, have you done it by Happy Gilmore
[Yesterday at 04:16:37 PM]


Elk Tracking Tips by WapitiTalk1
[Yesterday at 03:45:28 PM]


66 lbs beaver by greenhead_killer
[Yesterday at 11:55:43 AM]


Looking for Your Help - Donate Used or New Gear by silverdalesauer
[Yesterday at 11:52:45 AM]


Spokane valley archery by nwwanderer
[Yesterday at 08:55:15 AM]


suppressor for a 7mm-08 by Sundance
[Yesterday at 07:11:12 AM]


12th Annual - 2026 YOUTH TURKEY HUNT CONTEST (enter by Mar 15) by engelwood
[March 08, 2026, 10:40:01 PM]


2026 Seattle Sportmen's Convention - March 7, 2026 by wa.hunter
[March 08, 2026, 09:48:43 PM]


whitetail scouting by hunter399
[March 08, 2026, 08:22:20 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal