collapse

Advertisement


Author Topic: No G1's  (Read 3913 times)

Offline Bigshooter

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Aug 2007
  • Posts: 6369
  • Location: Lewis Co
  • High Wide And Heavy
No G1's
« on: May 07, 2009, 12:09:33 AM »
If you are scoring a deer and it is missing its G1's do you still get both mass measurements.  H1 and H2.  Or should I say all four mass measurements.

Thanks
Welcome to liberal America, where the truth is condemned and facts are ignored so as not to "offend" anyone


"Borders, language, culture."

Offline RyanD

  • Trade Count: (+1)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 89
  • Official Measurer-P&Y, NW Biggame
Re: No G1's
« Reply #1 on: May 07, 2009, 10:38:54 AM »
You will always have four circ. measurements no matter what.  If there is no G-1 present then take the circumference at the smallest point between the burr and G2 and use this measurement as H1 and H2.  Hope this helps.  Have Fun! :)

Offline Bigshooter

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Aug 2007
  • Posts: 6369
  • Location: Lewis Co
  • High Wide And Heavy
Re: No G1's
« Reply #2 on: May 07, 2009, 08:54:41 PM »
That is what I thought.  But a buddy told me I was wrong unless they had changed it in the last couple of years.

Thanks
Welcome to liberal America, where the truth is condemned and facts are ignored so as not to "offend" anyone


"Borders, language, culture."

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32951
  • Location: Pacific NorthWest
Re: No G1's
« Reply #3 on: June 28, 2009, 01:12:49 PM »
Don't get too hung up on the g1 measurements, if you see a buck that is 18, 12 and 12 you had better drop it regardless whether it has brow tines or not, and as far as mass goes, it adds to total score and looks way impressive but is not as crucial as main length and inside spread for a high score :twocents:
The things that come to those who wait, may be the things left by those who got there first!

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50594
  • Location: Selah, Washington
Re: No G1's
« Reply #4 on: June 28, 2009, 01:39:29 PM »
Ryan and you are correct, your buddy is wrong.  Same with not having the 4th point, or one of the other G's. You still get 4 mass measurements.

Offline HardCorpsHuntr

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 803
  • Location: Chelan County
  • Semper Fi
Re: No G1's
« Reply #5 on: June 28, 2009, 02:01:45 PM »
So where do you get the H3 measurement on a three point with no G3?
"Fast is fine. Accuracy is final. You need to learn to shoot slow, real fast." -Wyatt Earp

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50594
  • Location: Selah, Washington
Re: No G1's
« Reply #6 on: June 28, 2009, 05:09:19 PM »
I believe its half the distance from teh end point and the base of the tine.  That then equals both H measurements.

Offline Crowns

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 149
Re: No G1's
« Reply #7 on: July 01, 2009, 09:24:29 PM »
Wow, I honestly did not know this.... So lets say I have a 5-point bull. I always figured I couldnt get an H-4. But I just take the distance between the daggar and the beam tip, cut it in half and take my girth measurement there?

Offline RyanD

  • Trade Count: (+1)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 89
  • Official Measurer-P&Y, NW Biggame
Re: No G1's
« Reply #8 on: July 01, 2009, 10:00:17 PM »
Quote
So where do you get the H3 measurement on a three point with no G3?

Bone is correct you take the distance from the tip of the point to the baseline at cut it in half and that is your H-3

Quote
So lets say I have a 5-point bull. I always figured I couldnt get an H-4. But I just take the distance between the daggar and the beam tip, cut it in half and take my girth measurement there?

Go from the center of the G-4's baseline to the tip of the beam and cut it in half, this will be your H-4 measurement.

You will always have 4 circ. measurements.  Have Fun :)

Offline Crowns

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 149
Re: No G1's
« Reply #9 on: July 01, 2009, 10:13:47 PM »
Thanks man, I appreciate that. I have a 5 point shed that scores 140 now  :) x2= 280+40= 320 give or take.

Offline Crowns

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 149
Re: No G1's
« Reply #10 on: July 01, 2009, 10:23:16 PM »
A big 5-point.

 


* Advertisement

* Recent Topics

Colockum WMA chukar hunting by Kingofthemountain83
[Today at 06:56:16 PM]


WA Bucket List….Mule Deer Permit by HereDuckyDucky
[Today at 06:45:23 PM]


Selkirk bull moose. by Ironhead
[Today at 06:00:17 PM]


The Rack by NOCK NOCK
[Today at 05:27:21 PM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by bearhunter99
[Today at 03:31:15 PM]


Lion Down - the Savor of Success by DonJuan
[Today at 02:22:27 PM]


Darwin Outfitters by Kingofthemountain83
[Today at 12:22:38 PM]


Cleaning glass by Mtnwalker
[Today at 11:38:43 AM]


Degreasing A Deer Skull by eyesinfront
[Today at 09:47:06 AM]


My Kansas 2025 Buck by Pathfinder101
[Today at 07:03:32 AM]


Idaho on the verge of outlawing by NOCK NOCK
[Today at 05:35:09 AM]


Idaho's new Deer/Elk License System by huntnnw
[Yesterday at 09:54:33 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 08:46:41 PM]


Power bait secrets......send it by metlhead
[Yesterday at 07:26:47 PM]


Leopard Cur Pups by Barehunter
[Yesterday at 04:09:58 PM]


In the background by Ricochet
[Yesterday at 01:22:33 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal