collapse

Advertisement


Author Topic: Razor clam cleaning question  (Read 7904 times)

Offline Teepee96

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2018
  • Posts: 27
  • Location: Bow
Razor clam cleaning question
« on: March 19, 2023, 09:12:24 PM »
I've got a question for the experienced razor clam folks on here.
My family and I just wrapped up our first razor clam trip ever and obviously being new we broke a few.
My question for the seasoned vets is are these broken clams just crab bait now? Everything online says to toss broken clams but we've been digging geoduck and horse clams my whole life and never would have thought to toss a broken clam.
So what is everybody doing with busted razors can't find anything on the search bar, thanks for any help you can give us

Offline cem3434

  • Non-Hunting Topics
  • Trade Count: (+31)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 3179
  • Location: Wetside
  • Groups: NRA, MDF, RMEF, NWTF, PF, RGS, WSF, WSTA
Re: Razor clam cleaning question
« Reply #1 on: March 19, 2023, 09:14:56 PM »
As long as they are fresh and still show signs of life, they get cleansed and go in the bowl with the rest of the processed clams.
The best friend a guy could have asked for. RIP chasing pheasants in heaven Denali girl.

Offline GWP

  • Forum Sponsor
  • Trade Count: (+26)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1750
  • Location: Big Sandy-By Westport
Re: Razor clam cleaning question
« Reply #2 on: March 19, 2023, 09:25:18 PM »
One’s we have dug get cleaned and eaten even if we break them and they are dead. We clean them within a couple hours at most anyway.
If the clam is horribly trashed it will be bait, but we can usually get at least some good meat out of most of them. 
Cuterebra are NOT cute!

Offline Teepee96

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2018
  • Posts: 27
  • Location: Bow
Re: Razor clam cleaning question
« Reply #3 on: March 19, 2023, 09:31:04 PM »
Alright that makes more sense. We had a long commute coming from Skagit county but they were dug and in the cooler within an hour so should be okay. the consensus on the internet was to clean them right away so going forward we will bring a paring knife and clean the broken ones on the beach. Thanks everybody for the input

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39189
  • Location: Rochester
    • robert68
Re: Razor clam cleaning question
« Reply #4 on: March 19, 2023, 10:31:08 PM »
I've never done anything different with broken ones versus undamaged. But then I usually will be home within an hour and a half of digging them.

Offline PsoasHunter

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2014
  • Posts: 236
  • Location: Western Washington
  • Groups: RMEF
Re: Razor clam cleaning question
« Reply #5 on: March 19, 2023, 10:45:03 PM »
We sometimes don't get to cleaning our clams till the next day and I'd still never toss a broken razor clam. They get cleaned like all the rest. I've done this for decades and have never had a problem.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6208
  • Location: Toledo
Re: Razor clam cleaning question
« Reply #6 on: March 20, 2023, 05:48:00 AM »
We sometimes don't get to cleaning our clams till the next day and I'd still never toss a broken razor clam. They get cleaned like all the rest. I've done this for decades and have never had a problem.

Same here . Clean em and eat em!

Offline syoungs

  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Aug 2012
  • Posts: 2266
  • Location: tri cities, WA
Re: Razor clam cleaning question
« Reply #7 on: March 20, 2023, 06:04:33 AM »
Alright that makes more sense. We had a long commute coming from Skagit county but they were dug and in the cooler within an hour so should be okay. the consensus on the internet was to clean them right away so going forward we will bring a paring knife and clean the broken ones on the beach. Thanks everybody for the input

My vote is to leave the knives at home and bring some shortish scissors. Makes easy work with just a couple small cuts. increased my cleaning speed by a significant amount

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6208
  • Location: Toledo
Re: Razor clam cleaning question
« Reply #8 on: March 20, 2023, 06:25:03 AM »
We use a combo of scissors and knives. The scissors really help.

Offline Jpmiller

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: May 2016
  • Posts: 4050
  • Location: Martin, ND
Re: Razor clam cleaning question
« Reply #9 on: March 20, 2023, 06:25:28 AM »
Alright that makes more sense. We had a long commute coming from Skagit county but they were dug and in the cooler within an hour so should be okay. the consensus on the internet was to clean them right away so going forward we will bring a paring knife and clean the broken ones on the beach. Thanks everybody for the input

My vote is to leave the knives at home and bring some shortish scissors. Makes easy work with just a couple small cuts. increased my cleaning speed by a significant amount

A buddy turned me into using scissor, I still use the knife to take the shell off but switched to scissors afterwards. It is quite a bit simpler in my experience.

Offline syoungs

  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Aug 2012
  • Posts: 2266
  • Location: tri cities, WA
Re: Razor clam cleaning question
« Reply #10 on: March 20, 2023, 06:40:49 AM »
i do keep an oyster knife handy, but dont have to use it much.
I toss a bunch of clams into the hottest tap water I can run, let em soak in that for a minute or so and they tend to open up enough to just use my fingers to crack the shells apart. From there its nothing but scissor work. after they are clean to my liking they hit a pot full of lightly salted ice water for a rest until they get packaged.

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12916
  • Location: Arlington
Re: Razor clam cleaning question
« Reply #11 on: March 20, 2023, 06:42:33 AM »
I've never tossed one unless it's very small and really mangled.  It does take more time and you end up with less meat but it's still a clam.

Offline Sitka_Blacktail

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Dec 2011
  • Posts: 3393
  • Location: Hoquiam, WA
Re: Razor clam cleaning question
« Reply #12 on: March 20, 2023, 07:05:58 AM »
If you shell your clams with boiling water, you'll find your recovery will improve.  Get the water boiling and some clams in a colander. (I usually do about a half a limit per dip) Also have a container full of cold water near the stove, large enough to hold all the clams you are cleaning.  This is a very important step.  Once the water is boiling, dip the colander into the boiling water so all the clams are covered and count off 8 seconds, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008. Then immediately dump the clams into the cold water. This keeps them from cooking which toughens them and makes them chewier when you fry them.  You might think 8 seconds in boiling water would kill and start cooking them, but the clams will still be alive and wriggling in your hand when you are cleaning them.  The boiling water will melt the necktie (the clear membrane that holds the shell on the clam) and make it easy to separate the clam from the shell by hand, if the shell hasn't already fallen off the clam by itself. When you are done cooling the clams in the cold water, remove all the shells from the cold water and you are ready to clean.

I use a small to medium pair of scissors with a narrow blade. I first cut the tip off then split the neck. With sharp scissors, you can usually just slide the scissors through the bottom of the two tubes in the neck and split it without using a scissor motion. Then I pinch the digger from the neck and body.  If you do it right, you pinch all the gills and guts away with the digger. This leaves a fairly clean body and neck which I rinse and put in the bowl i use for finished products. If there are any gills or anything else left on the neck portion, it's easy to trim it off with the scissors. One example would be if you broke a clam and got sand into the meat. You want to cut away the sandy part as it's no fun grinding your teeth with sand.  Next, I use the scissors to cut the guts and gills off the digger. You can get most of it with one cut. Most of what's left I again use a pinching method to squeeze out of the digger. Then I split the digger by holding it with the foot pointed at me with the tip up. Again, you can just slide the blade through and then snip with the scissors. Once open, it's easy to clean the last of the veins of the guts away.

Once the clams are shelled, I can easily clean a clam a minute and a limit in 15 minutes.
A man who fears suffering is already suffering from what he fears. ~ Michel de Montaigne

Offline Bullkllr

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 4918
  • Location: Graham
Re: Razor clam cleaning question
« Reply #13 on: March 20, 2023, 08:22:30 AM »
^That^ from Sitka, is the definitive method  :tup:

Growing up, we never used hot water on razors- just 'filetted' away the shell from the body. The hot water gets rid of the membrane and results in a cleaner final product and it doesn't affect the quality if you do it that way!
A Man's Gotta Eat

Offline cjjcb

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2014
  • Posts: 112
  • Location: Over yonder...
  • Groups: BHA
Re: Razor clam cleaning question
« Reply #14 on: March 20, 2023, 08:58:29 AM »
Just don't forget that "Under state law, a daily limit consists of the first 15 clams dug regardless of size or condition"... so throwing back smallies or mangles clams is technically illegal. Beaches are so crowded, ya never know who's watching...
Excellency, fiddlesticks! My name's Fred and I'm a man, same as you.

 


* Advertisement

* Recent Topics

Idaho 2025 Controlled Hunts by phildobaggins
[Today at 11:31:27 AM]


Muzzy Mission Quality!!! by NOCK NOCK
[Today at 11:26:18 AM]


Cowiche Quality Buck by OutHouse
[Today at 11:22:45 AM]


FFL preferences or warnings in Olympia or south Sound area? by Knocker of rocks
[Today at 11:07:04 AM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by Karl Blanchard
[Today at 10:58:40 AM]


2025 OILS! by Beastmonger1987
[Today at 10:54:50 AM]


Bow mount trolling motors by Happy Gilmore
[Today at 10:22:59 AM]


Getting back into dogs by Machias
[Today at 10:05:45 AM]


49 degrees north late Moose tag by vandeman17
[Today at 09:05:21 AM]


Stillaguamish 448 QD rifle tag by jason stevens
[Today at 09:05:09 AM]


Bear behavior by dylan34_36
[Today at 08:51:28 AM]


Idaho Unit 31 Late Rifle! by Sliverslinger
[Today at 08:36:10 AM]


Machias' 2025 Spring Bear/Northern Idaho by Machias
[Today at 07:52:44 AM]


Norway pass Elk by hunterednate
[Today at 07:44:13 AM]


Early controlled hunt rifle tag Lemhi Range by Shooter4
[Today at 07:29:56 AM]


Toutle Quality Bull - Rifle by RB
[Today at 03:13:07 AM]


Boat registration by Happy Gilmore
[Yesterday at 10:22:29 PM]


Norway Pass Archery Elk 2025 by Boss .300 winmag
[Yesterday at 09:14:45 PM]


Entiat Quality tag by WAcoueshunter
[Yesterday at 09:05:06 PM]


Palouse/Mica (GMU 127) Access for Trades Work by dr.derek
[Yesterday at 08:29:53 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal