collapse

Advertisement


Author Topic: Back to the drawing board...................  (Read 5412 times)

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Back to the drawing board...................
« on: March 12, 2008, 07:50:06 AM »
Well finally got out shooting this week end. Was wanting to work up a load with the Dead Center bullets all with no luck. Started out with 90grs of 777 and a 310 grain bullet.......accuracy sucked dropped down to 85grs  same story. I went back to the tried and true knight sabot under 100grs of 777 and Im right back to a 2-1/2''group at 100 yards. I think Ill just stick to what works. Just wanted to pass the info on. Hope this helps someone.


Sage

Offline wastickslinger

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2863
  • Location: pluto
Re: Back to the drawing board...................
« Reply #1 on: March 12, 2008, 08:16:32 AM »
2 1/2 inch group at 100 yards with an iron sight smokepole doesn't sound like a problem to me. That would mean 4-6 inch group at your max range. I have never been able to get a tighter group than that with an open sight muzzleloader and I get er done.  :dunno: just my 2 cents.

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6016
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #2 on: March 14, 2008, 05:10:20 PM »
I don't know what kind of rifle your shooting but the knight 310 gr sabots are the best I have ever found for accuracy in a Knight rifle.

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Re: Back to the drawing board...................
« Reply #3 on: March 14, 2008, 06:31:18 PM »
 I shoot a Knight Bighorn. I didnt mean to come across like I had to get better groups. I was just wanting to see what the Dead Center loads were capable of. My gun didnt really care for them ,like you  my most accurate loads are with the Knight sabot. I do this all the time, get somethiung that works and then I try to go out and re-invent the wheel. Most be my wife rubbing off on me   LOL.


Sage

Offline DBake

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2007
  • Posts: 237
Re: Back to the drawing board...................
« Reply #4 on: March 17, 2008, 12:56:13 PM »
Any of you shooting/tired Hornady Great Plains?

Slenk

  • Guest
Re: Back to the drawing board...................
« Reply #5 on: March 17, 2008, 01:11:50 PM »
Yup !
The only bullet that I shoot . They DO kill Elk.
Mostly shoot round ball though.
Slenk

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6016
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #6 on: March 17, 2008, 03:51:51 PM »
Any of you shooting/tired Hornady Great Plains?
I've shot them a bunch, my 2nd choice

 


* Advertisement

* Recent Topics

Last year putting in… by wa.hunter
[Today at 11:21:43 PM]


Desert Sheds by Dan-o
[Today at 09:54:46 PM]


Search underway for three missing people after boat sinks near Mukilteo by Stein
[Today at 09:30:24 PM]


Anybody breeding meat rabbit? by jackelope
[Today at 09:22:04 PM]


Sportsman’s Muzzloader Selection by VickGar
[Today at 09:20:43 PM]


Vantage Bridge by jackelope
[Today at 08:03:05 PM]


wyoming pronghorn draw by 87Ford
[Today at 07:35:40 PM]


Nevada Results by andrew_in_idaho
[Today at 05:13:20 PM]


Wyoming elk who's in? by go4steelhd
[Today at 03:25:16 PM]


New to ML-Optics help by Threewolves
[Today at 02:55:25 PM]


Survey in ? by metlhead
[Today at 01:42:41 PM]


F250 or Silverado 2500? by 7mmfan
[Today at 01:39:14 PM]


Is FS70 open? by yajsab
[Today at 10:13:07 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal