Just picked up Magnus Stingers. Thoughts?

[DoubleJ]

My draw weight has gone down to 50lbs or so so, I was in the market for a 2 blade broadhead.  I wanted to go down to an 85gn 2 blade but, I couldn't find them so, I settled on the 85gn Magnus Stingers.  They are the same shape as the 2 blade 100gn version I saw but have 2 small bleeder blades technically making it a 4 blade.  The bleeder blades are small enough I don't think they'll interfere with penetration.  Thoughts?

[carpsniperg2]

Stingers and buzzcuts are great heads. I have been around animals shot with both and liked the results. I have my wife and little bro shoot the buzzcuts. I really like them on bows under about 55lbs.

[DoubleJ]

Only buzzcut's they had were 125gn.  I looked 

[foambeetle]

I have no personal experience with them, but thought I would mention that I see Muzzy Phantoms come in a two-blade 85 gr. option . . .

http://www.bowhunterssuperstore.com/muzzy-phantom-85gr-blade-broadhead-p-1864531.html?osCsid=b255442e7952a15ccae7b1d5b1a077c8

best of luck w/ whatever BH you go with

[DoubleJ]

I was at Cabelas, not ordering online.

[MLBowhunting]

yeah for penetration a 2 blade is great.  you made a good choice

[RadSav]

The steel on the Muzzy is a little better than the Magnus but it is still a good head.  Stinger was the right choice over the BuzzCut.  Never understood the reason to add dull spots that promote coagulation, but I'll try not to write a book here.  I strongly suggest the use of a Lansky sharpener and honing with the 22 degree angle and the Yellow ceramic stone.  That will get you as close to a commercial razorblade as you can get with that steel.  Not too bad of people to support there either.  Good luck.

[D-Rock425]

Sounds like a good choice for lower poundage.

[DoubleJ]

Yay!!  With all the feedback, it actually sounds like I did something right for once!!

[Button Nubbs]

great heads and good choice!