Looking to get a Vais Muzzle Brake installed.. recommended smiths in Sea area?

[MDGrand]

Appreciate recommendations....

[scottcrb]

ive heard the guys at west coat armory in bellevue are good and the gun smith at fed way discount guns good too.

[jackelope]

Mike Pallozzo

I might have spelled that wrong.

[birdwacker]

Mike Pallozzo

I might have spelled that wrong.

[MDGrand]

Mike Pallozzo

I might have spelled that wrong.

Contact info? Web site?

[mikelonsford]

Mike Palazzo works out of his home in Covington, he did a good job for me on a rifle repair, I have seen lots of people recommend him for a variety of work.  He seemed like a great old guy to me.

Palazzo Precision

26921 164th Avenue SE
Covington,WA98042-8222
Phone: (253) 631-3659

[jackelope]

I am sorry I did not have him install my brake. The guy who did could have done a much nicer job. He definitely comes highly recommended. There's a thread like this once a year or so and he's always the guy that gets the nod from about anyone.

[FALFire]

Yep.....Mike Palazzo is the man. He pays an incredible attention to detail. He also makes his own brakes, builds custom benchrest guns of all calibers and flat out knows his chit. I've dealt with Mike on many occasions and he is the guy to go to.  He is just off SR18 at the Kent Kangley (SE272nd St.), go w/b from SR18 two traffic lights to 164th Ave SE, turn north bound, he is on the left about a block or so. Look for the sign "Villa Vera" in his front yard.

[Rob]

I installed a Vais on my rifle on the recommendation of Jackalope a year or so back.  My buddy did the install. 

you will be very happy with it.  I'd guess a 50% decrease in recoil and 10% increase in sound.

[Rob]

some photos

[MDGrand]

Thanks, Rob!

Only a 10% increase in noise? I have read alot about the Vais brakes and their claim in that their in deed is little increase in noise..

But is that REALLY true?

[Rob]

BTW, from the time I mailed the check in, to the time I had it in hand was about 1.5 weeks. 

[Rob]

Thanks, Rob!

Only a 10% increase in noise? I have read alot about the Vais brakes and their claim in that their in deed is little increase in noise..

But is that REALLY true?

It is a bit louder, that is true.  I did not measure it so my assumption is pretty subjective.  But I'd guess about 10% or so. 

The gun I was firing (it is a wildcat)  went from recoil about equal to a 243 down to a smidge more than a 223 Rem. 

[jackelope]

I had a Defensive Edge brake installed on one of my Encore barrels.  It reduced the recoil a  lot but it's very loud.
I kinda wish I got the VIAS for the less noise factor and had someone else do it so the install would be neater.
 

[MDGrand]

I had a Defensive Edge brake installed on one of my Encore barrels.  It reduced the recoil a  lot but it's very loud.
I kinda wish I got the VIAS for the less noise factor and had someone else do it so the install would be neater.

Just so I have an idea of where NOT to go for the install.. do you mind sharing where you had it installed?