what are your favorite handloads for 270win and 300winmag?

[BOWHUNTER45]

hahaha yeah that red bull should help ... I had a .243 700 ADL and it would shoot like that but I finally shot it out after 40 yrs of endless firing ...I sure miss that gun ...I grew up on a farm in Pa and I lived to bail hay  just so I could shoot ground hogs ...every farmer within 10 miles loved my buddy Mark and I because we never let up on blasting those hole diggin little SOB ...They bad news on a trailor loaded with hay ... seen many flipped over ....thats why varmit hunting is a must if you want to be dead eye dick  especially when they get smart they slowly peek their little heads out of the hole which gives you about 2inches to hit at a long way out !!! Man I miss those days !!

[Biggerhammer]

hahaha yeah that red bull should help ... I had a .243 700 ADL and it would shoot like that but I finally shot it out after 40 yrs of endless firing ...I sure miss that gun ...I grew up on a farm in Pa and I lived to bail hay  just so I could shoot ground hogs ...every farmer within 10 miles loved my buddy Mark and I because we never let up on blasting those hole diggin little SOB ...They bad news on a trailor loaded with hay ... seen many flipped over ....thats why varmit hunting is a must if you want to be dead eye dick  especially when they get smart they slowly peek their little heads out of the hole which gives you about 2inches to hit at a long way out !!! Man I miss those days !!

Rockchucks/Grounhogs are my addiction. Here in central WA my personal best is 176 in a spring/ summer, loads of fun. Most of those were shot with a 300 Win mag, 180 BT and RL-19.

[724wd]

So 724wd how did you managed to have 1970 stock of powder ?

my dad's been reloading .270 with 4831 since the late 60's.   

[blackdog]

270 win brass, 55 grs IMR 4831, 150 grain Nosler partition seated to the base of the neck. cci large rifle primer.

[hub]

Here is one my favorite loads doing it. Thats only 100 yrds. with the .270

[high country]

Mine likes 4831.....a lot. Look close, that 5 bullets, but only 100yds.

 

[Biggerhammer]

Mine likes 4831.....a lot. Look close, that 5 bullets, but only 100yds.

 

Smokn group!  Were you a little nervous on that 5th shot? I hate throwing a smoker group on the last round..

[high country]

I would have quit at 3 but I think that's just fooling myself. I have printed more than a few stellar groups with old reliable. One of the few on my "to the grave" pile. It is also the #1650 ti ever made.....and when I left the store, that was my bill.....lol. funny tidbit.

[bearpaw]

Mine likes 4831.....a lot. Look close, that 5 bullets, but only 100yds.

 

Smokn group!  Were you a little nervous on that 5th shot? I hate throwing a smoker group on the last round..

excellent group... 

[hub]

140 BT,s powered by 56.5 grains of IMR-4831. I pulled the 4th shot dang it.

[blackdog]

A few years ago in a hurry and loaded 20 rounds at partners house with just the light through the window. Went out for the evening hunt and afterwards decided it would be smart to shoot and make sure they went bang. Recoil seemed abusive and bolt was reluctant to open. Drove back and checked the scale 60 grains imr 4831, not good! I'm sure velocity was impressive but when your primers disappear it might be a sign of excess pressure.

[hub]

A few years ago in a hurry and loaded 20 rounds at partners house with just the light through the window. Went out for the evening hunt and afterwards decided it would be smart to shoot and make sure they went bang. Recoil seemed abusive and bolt was reluctant to open. Drove back and checked the scale 60 grains imr 4831, not good! I'm sure velocity was impressive but when your primers disappear it might be a sign of excess pressure.

Yea boy. 60grs. of IMR-4831 would be over doing it. I use lots IMR-4831 and H-4831. They are not the same. The IMR version will do anything the H version will do with three grains less powder.

[hub]

270 win brass, 55 grs IMR 4831, 150 grain Nosler partition seated to the base of the neck. cci large rifle primer.

Yes indeed. That is another excellent load I have used alot. I use that combo with the BT and the PT 150,s