collapse

Advertisement


Author Topic: 308 ladder test  (Read 766 times)

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
308 ladder test
« on: June 05, 2020, 10:49:59 AM »
I decided to develope a new load for my Remington Varmit .308Win with the bullet seated .020 off the lands. Itís awesome to see what just a few grains Does to group sizes. I definitely found my load. 165grn Hornady SSTís on top of Varget.

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 41613
  • Location: E. WA
Re: 308 ladder test
« Reply #1 on: June 05, 2020, 11:08:54 AM »
Nice. 

Yeah, I stumbled on a similar load with 165's Varget (partitions and AB). 

If anyone is interested in getting started reloading, grab a .308 Win, a 165 grain traditional projectile, and some Varget.  It's almost too easy and a great confidence builder.

Online buckfvr

  • Washington For Wildlife
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 3252
  • Location: PREDATOR PIT UNIT 121
Re: 308 ladder test
« Reply #2 on: June 05, 2020, 11:21:27 AM »
I always try and finish up with three 5 shot groups .2 grains each way of your chosen load, and most importantly, at 200 yards.

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #3 on: June 05, 2020, 12:40:54 PM »
Definitely a confident booster in the reloading aspect. I never expected to get a group like that from a used rifle. 165ís and varget are made for each other.

Offline Henrydog

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2016
  • Posts: 838
  • Location: Eastern Washington
  • Groups: NRA Life Member, RMEF, Phesants Forever
Re: 308 ladder test
« Reply #4 on: June 05, 2020, 01:15:54 PM »
Wow, that is pretty.  There is nothing my gratifying than rolling your own, and on top of that getting results like that.  Nicely done

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #5 on: June 05, 2020, 11:11:30 PM »
Exactly. Thanks!

Offline CaNINE

  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1080
  • Location: Gig Harbor
Re: 308 ladder test
« Reply #6 on: June 06, 2020, 06:42:29 AM »
Nice work.  Iím working up loads for my 308 varmint as well. I just may have to give these 165s a try.  Did a full charge weight work up on the 185 juggernauts with varget and didnít find anything too interesting.
The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4000
Re: 308 ladder test
« Reply #7 on: June 13, 2020, 08:02:02 PM »
Got my loads ready for 600 yrd Ladder test .    Had pretty good luck using a ladder at 600 to tune for 1000. 
My buddy said it looks like christmas. 


Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #8 on: June 13, 2020, 08:24:13 PM »
Hahaha, yes it does. Thatís cool. Never heard of load development at 600yds. Post results.

I shot my 308 at 1000yds in eberg last month....39moa of elevation. Thatís all my rifle had and it worked.

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4000
Re: 308 ladder test
« Reply #9 on: June 14, 2020, 01:57:57 PM »
Well I collected some data today with 500 yard ladder test for 30Ē 338 Proof Barreled Lapua       

Shooting virgin brass so expect es to tighten up on reloading.   
Got a starting point anyway .



Took along my beat up 40 year-old 300 win mag Vanguard out to try some factory 215 Bergers thru it.   No brake and trigger is stiff so it hops off the rest when you shoot.   Go figure it put 4 in a 2.5Ē group at 500. 

« Last Edit: June 14, 2020, 02:05:09 PM by Magnum_Willys »

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #10 on: June 14, 2020, 06:59:22 PM »
Not attempting to hijack my own thread but I built this stand today with my new 20 inch target. My goal with this says target is for a 1 mile shot. I hit 1450 yards with a 12Ē target two weeks ago, so whatís another 310 yards?😂😂

Iím attempting this feet with a custom 300 Remington ultra mag topped with a vortex Viper PST II 5-25 FFP. 

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4000
Re: 308 ladder test
« Reply #11 on: June 14, 2020, 07:06:55 PM »
Stand looks good. VDoable at a mile !  But 1450 with 12Ē is tough.    Last time out my son hit 10Ē at 1000 yd cold bore first shot   I said wanta try again?  Nope, Iím dialed in! , he said. 

20Ē at 1000 takes not over 2 shots, but at a mile hope for low wind.....

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 5938
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: 308 ladder test
« Reply #12 on: June 14, 2020, 07:16:51 PM »
1 mile is where things get fun for me.  So many variables.  Never have set up steel for the 1m I just find a 1 moa rock or real close to that.   Rum is more than capable at that range.   I think where the rum really shines is with heavies! Like the 245 eol
243Round ct. 126
338rc 773
338 lapua rc 200
37XC rc 218
2020 Rifle rc 361

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #13 on: June 14, 2020, 07:22:07 PM »
Mag, your boy had it right, end on a good note👍😂

Offline Mulie87

  • Trade Count: (+8)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 287
  • Location: Puyallup
  • Groups: NRA USPSA
Re: 308 ladder test
« Reply #14 on: June 14, 2020, 07:26:35 PM »
Ya, I have thought about shooting heavier bullets but this thing is a laser with 200grn eldx At 3120fps.

I have been working on understanding wind. I ignore my kestral wind readings at my firing position And read mirage At the target and adjust from there. I learned that from my army sniper buddy who i took out shooting a couple weeks ago. I was doing it all wrong. Donely thing I use my Kestral for now is environmental factors.

 


* Advertisement

* Recent Topics

stiff lightweight boots? by vandeman17
[Today at 03:58:59 PM]


Wdfw survey by vandeman17
[Today at 03:58:06 PM]


WTS .358 Winchester Ammo by BKMFR
[Today at 03:56:03 PM]


New to the area by cb1989
[Today at 03:48:39 PM]


Remington 700 BDL 300RUM by RClare1223
[Today at 03:44:30 PM]


New to the Chelan area by heavyhorned
[Today at 03:44:30 PM]


Not a bear by Ricochet
[Today at 03:36:36 PM]


What to do with cape by duckman18
[Today at 03:35:26 PM]


Crabbing by Stein
[Today at 03:23:31 PM]


Raffle Sales by Buckhunter24
[Today at 03:22:02 PM]


WTB: 23-28' boat. by Ridgeratt
[Today at 03:02:39 PM]


Got my 2019 Montana muley back by MADMAX
[Today at 02:59:52 PM]


Blue Mountain Wolf... by gramps
[Today at 02:55:37 PM]


Summer Salmon by huntnnw
[Today at 02:49:26 PM]


Time needed shooting to be ready for archery by vandeman17
[Today at 01:32:08 PM]


2019 Wyoming High Country Deer Hunt by MerriamMagician
[Today at 01:22:01 PM]


Rayonier hunting permits by JimmyHoffa
[Today at 01:05:31 PM]


FS 3 crab pots by Stein
[Today at 12:44:28 PM]


Kapowsin and Eatinville open but NOT White River??? by Macs B
[Today at 12:34:24 PM]


Looking for a Fawn distress call - mouth only. by bearmanric
[Today at 12:29:07 PM]