collapse

Advertisement


Author Topic: Truck noise troubleshooting  (Read 860 times)

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+9)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 11362
  • Location: Walla Walla
  • HuntWA Woodblock
Re: Truck noise troubleshooting
« Reply #15 on: October 29, 2020, 09:51:03 AM »
Sounds like its coming from the hub.  Is that the carrier?  I was thinking about replacing the whole hub.


Sent from my iPhone using Tapatalk
00 Silverado, uses a hub/bearing assembly on the front. They go through them regularly to say the least. Very very very likely your culprit.  :twocents:
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline jackelope

  • Administrator
  • Trade Count: (+23)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 43170
  • Location: Duvall, WA
  • Groups: WSB RMGA NRA RMEF BHA
Re: Truck noise troubleshooting
« Reply #16 on: October 29, 2020, 10:04:23 AM »
Sounds like its coming from the hub.  Is that the carrier?  I was thinking about replacing the whole hub.


Sent from my iPhone using Tapatalk
00 Silverado, uses a hub/bearing assembly on the front. They go through them regularly to say the least. Very very very likely your culprit.  :twocents:

That's a hub. I replaced 7 of them in my old 2002 Silverado. I got pretty good at them. Theoretically the noise should get louder when you're turning gradually to the right if it's a left hub.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Online Stein

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+4)
  • Old Salt
  • ******
  • Join Date: Sep 2013
  • Posts: 7653
Re: Truck noise troubleshooting
« Reply #17 on: October 29, 2020, 09:19:20 PM »
OK, follow up post.  If you guessed the wheel bearing, you are correct!

If you guessed the u-joint, you are correct too!  Lucky me!

I replaced the hub assembly and the steady noise went away.  Surprisingly, the vibration over bumps didn't.  Before I did the hub, I put it back in the air and checked the rear, driveline and both joints and everything looked fine.  I spun the wheels and driveline and it all looked good.

So, I dropped the driveline and sure enough the front joint was bad.  That surprises me because I've only messed with the rear one that ends up in the water a couple times a year launching at low tide.  Back one was fine, front was bound up.

Back to the store, a bit of cussing and hammering and it's all back together, no noise, no vibration, good as new.  Thanks to Chevy for having 157 driveline/yoke combinations and using a different u-joint for every one, that makes finding the right part real awesome.  Aluminum shaft, steel yoke, extended cab, 4x4, 3 door (early year production vs 4 door), 1.063 diameter, non-greaseable, one-piece shaft, no center bearing, transmission side for the win.

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 45988
  • Location: E. WA
Re: Truck noise troubleshooting
« Reply #18 on: October 29, 2020, 09:42:34 PM »
lol

Let me tell you about my $400 power steering pulley.

Offline Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 15895
  • Location: Tinker AFB, OK
Re: Truck noise troubleshooting
« Reply #19 on: October 29, 2020, 09:58:34 PM »
Glad you figured it out!  :tup:


I had a similar issue with my 1998 1988 Silverado. Shortly after I bought it in 2001. I would hear a rhythmic thump, thump, thump, low in noise level.

I asked during the test drive about the rythmic noise.
The dealer "Emerald Motors" said it was common the that year of Chevy.

Within a short time, it got much worse.
When I turned to the left it would get even more pronounced.

Had my Spicer U-joints checked out at an independent shop. They were fine.

Then we opened the rear end, and multiple teeth fell out. It had a chunk missing with many teeth from the ring gear. The weird part is the gear oil was pristine, no noticeable shavings.  :bash:

So the dealer,  that I bought it from "Emerald Motors" on meridian in Puyallup, I can only infer,

Took the rear end cover off.
Saw the problem, and replaced the broken teeth back in the punkin, and refilled the gear
oil.

Definitely tried to cover it up.

I confronted him about it, and he lied his ass off, then when called out, threatening to call the police. Said he felt threatened.

Well I suppose he "might" have felt threatened,  :dunno:
I can neither confirm nor deny bodily harm was implied.  :dunno:



I had a detroit locker installed.

Still does not dismiss "Emerald Motors" and that snivelling owner are a ripoff.

I stand by that claim.
« Last Edit: October 29, 2020, 10:07:31 PM by Alchase »
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline Zardoz

  • Political Topics
  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Sep 2012
  • Posts: 14103
  • Location: Kelso, WA
  • Groups: NRA,GOA
Re: Truck noise troubleshooting
« Reply #20 on: October 30, 2020, 06:48:12 PM »
Glad you got it resolved.    :tup: I was going to offer up that it was the Muffler Bearing causing the problem..... :chuckle:
“It is the responsibility of the patriot to protect his country from its government.”—Thomas Paine

Certa Bonum Certamen

Offline deerlick

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Feb 2009
  • Posts: 208
Re: Truck noise troubleshooting
« Reply #21 on: October 30, 2020, 10:04:53 PM »
Make sure you check the blinker fluid too

 


* Advertisement

* Recent Topics

Montana deer tags filled. by bearhunter99
[Today at 05:00:28 PM]


north chelan goat and licoln cliff sheep tag holders contact me by Limhangerslayer
[Today at 05:00:25 PM]


Skunk by rainshadow1
[Today at 04:58:50 PM]


JOBS: Looking for work/Looking to hire by Widgeondeke
[Today at 04:58:37 PM]


Tips and tricks thread by Trapper John
[Today at 04:58:10 PM]


Blacktail Deer Question by cooltimber
[Today at 04:53:56 PM]


Bushnell 4-14 for sale by Buddyk-9
[Today at 04:49:45 PM]


First time in Montana for deer by Dale Gribble
[Today at 04:49:33 PM]


Ruffed Grouse hunting and elevation by Stinkyrat
[Today at 04:46:38 PM]


Where's Wally !! by Reidus
[Today at 04:38:09 PM]


8 HP Honda boat motor by allen
[Today at 04:33:02 PM]


Hard bow case recommendations by The Fin
[Today at 04:31:16 PM]


Rescue-Who ya gonna call by Born2late
[Today at 04:27:36 PM]


Locked Out by Muckleshoots by pope
[Today at 04:21:55 PM]


Bear Meat by idaho guy
[Today at 04:17:42 PM]


Swakane by jstone
[Today at 04:12:39 PM]


Mushroom ID Thread by anthropisces
[Today at 03:52:19 PM]


Remington 6mm brass by davef
[Today at 03:49:02 PM]


Wifes first solo sit by Watimberghost
[Today at 03:35:21 PM]


2020 Whitetail Watch- pre-rut/rut activity by elkboy
[Today at 03:10:58 PM]