collapse

Advertisement


Author Topic: 30-06 and RL22 or H4381  (Read 1875 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
30-06 and RL22 or H4381
« on: April 26, 2021, 07:27:33 AM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

« Last Edit: April 26, 2021, 07:44:07 AM by wooltie »

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8928
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: 30-06 and RL22 or H4381
« Reply #1 on: April 26, 2021, 10:44:04 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?
Official hunt-wa bigfoot field researcher!

Offline jeffitz

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 339
  • Location: SW WA
Re: 30-06 and RL22 or H4381
« Reply #2 on: April 26, 2021, 11:06:42 AM »
I'm running 62gr reloder 22 but with 168gr. It's compressed and is a tack driver just over 2900fps. I havent tried 180s with the 168s performing so well. What kind of grouping are you getting now?


Same here- compressed RL22 (cant remember exact grain amount at the moment) with the 168 Nosler Ballistic Tip - shoots good out of my old Ruger.
If you're gonna be dumb,you gotta be tough.

Offline HooknoseHunter

  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 127
  • Location: Stevens County
Re: 30-06 and RL22 or H4381
« Reply #3 on: April 26, 2021, 05:37:30 PM »
Running low on 4350, so I have to figure out something with RL22 or H4381.

Anyone have luck with 30-06 in 180g with RL 22?  Specifically I'm wondering if the need the pack the case or get to a compressed load.

I'm getting the velocity I want at a relative low charge (compared to the books), but still circling the drain as far as identifying something that groups.  Seating depth changes don't seem to tighten up things.  Ladder tests with the chrono are as expected, so nothing unusual there.

Nosler has 58.0 as the starting weight, going up to 62.0  I'm seeing 2750 fps at 58.0 grains for 180g bullet.  Not a lot of room left in that case.  I've always achieved decent velocity with this gun, and other powders and bullets without having to go beyond max book, or even approach max book. 

I supposed I could increase the charge because I'm not seeing any pressure signs, and see what happens.

I'm shooting 178 ELDX or 180g interlock.

I use 59.0 grains of RL22 behind a 180gr Speer Hot Cor in my 30-06 and it’s extremely accurate.
STOP HELPING WESTSIDE HUNTERS!!!!!! Let them fail and they will stop coming

Offline MeatMissile

  • Trade Count: (+9)
  • Hunter
  • ***
  • Join Date: Jun 2018
  • Posts: 247
Re: 30-06 and RL22 or H4381
« Reply #4 on: April 27, 2021, 11:14:11 PM »
180 and 200gr bullets, a 24-26 inch barrel, and H4831 has worked well for me in the 30-06. 

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1957
Re: 30-06 and RL22 or H4381
« Reply #5 on: April 28, 2021, 06:51:01 AM »
62 of R22 behind a 165 accubond.  Accurate and Fast!  Been wanting to try 178 ELDX but supply is low.

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
Re: 30-06 and RL22 or H4381
« Reply #6 on: April 28, 2021, 09:46:23 AM »
Thanks for the input.  Maybe I'll increase the load and see what that does, although I'm getting good velocity at lower weights. 

Could always try some 165s too.  Getting 2750 fps on 180g at 58.0g RL22...

 


* Advertisement

* Recent Topics

A lonely Job... by JDArms1240
[Today at 12:59:00 AM]


49 Degrees North Early Bull Moose by westdcw
[Yesterday at 11:11:57 PM]


2025 Crab! by WAcoueshunter
[Yesterday at 09:45:00 PM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Boss .300 winmag
[Yesterday at 09:42:07 PM]


Bear behavior by Boss .300 winmag
[Yesterday at 09:36:32 PM]


Toutle Quality Bull - Rifle by HntnFsh
[Yesterday at 08:09:14 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by WoolyRunner
[Yesterday at 06:39:13 PM]


2025 Montana alternate list by Wingin it
[Yesterday at 06:28:33 PM]


MA-10 Coho by WAcoueshunter
[Yesterday at 02:08:31 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 01:52:01 PM]


Blue Mtn Foothills West Rifle Tag by Trooper
[Yesterday at 01:18:40 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Yesterday at 01:01:22 PM]


50 inch SXS and Tracks? by jrebel
[Yesterday at 11:20:33 AM]


Sockeye Numbers by Southpole
[Yesterday at 11:12:46 AM]


3 pintails by metlhead
[Yesterday at 11:07:43 AM]


Modified game cart... 🛒 by Dan-o
[Yesterday at 08:44:37 AM]


Velvet by Brute
[Yesterday at 08:37:08 AM]


Calling Bears by hunter399
[Yesterday at 06:12:44 AM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Yesterday at 05:43:11 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal