collapse

Advertisement


Author Topic: Moisture on the carcass quarters  (Read 15241 times)

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Moisture on the carcass quarters
« on: October 16, 2008, 10:48:02 PM »
So I'm still looking to buy a refrigerator to make into my meat locker. In the mean time, the quarters are still in the game bags, in my big Coleman cooler.  I have a block ice on the bottom with a plastic garbage bag covering that and running along the rest of the bottom.  On top of that sit all of the quarters and the backstraps in game bags.  The game bags are a bit damp but it is not in standing water.  The deer was killed 3 days ago and I'm hoping to have it hanging in a refrigerator tomorrow but I'm wondering if it really NEEDS to be dry now. I'm planning to wait 7-10 days before butchering.    :dunno:

I don't know if it matters but we immediately gutted and skinned the deer after kill.  There was some intestinal puncture that got onto some of the body cavity but we washed it thoroughly with a hose.

I processed my own last time and that one was small enough that I had room in the fridge.  Little different process this time.  Just looking for tips so that I can age it as long as possible without risking bacteria and/or spoilage.

Thanks.

Offline bow4elk

  • Pacific Northwest Bowhunting
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 3413
  • Location: Olympia, WA
  • Contact me at: tom@pnwbowhunting.com
    • https://www.facebook.com/pacific.northwest.bowhunting/
    • Pacific Northwest Bowhunting
Re: Moisture on the carcass quarters
« Reply #1 on: October 16, 2008, 11:22:37 PM »
As long as it's on ice and kept cold, the moisture is not an issue.  I have no issue with meat in ice water.  I dry it good with an old cotton bath towel, cut it and wrap it.  Been cutting meat for a long time, no issues.  Cold is the name of the game.  Moisture + warm = bacteria.  Moisture + Cold = take your time.

Hope this helps.  Don't panic, just keep your meat on ice and you're fine.
Official Measurer: Pope and Young Club, NW Big Game Inc., National Muzzle Loading Rifle Association, Oregon Shed Hunters
First Hunt Foundation mentor
Washington State R3 Coordinator

Pacific Northwest Bowhunting http://www.pnwbowhunting.com

Offline billythekidrock

  • Varmint
  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 13440
Re: Moisture on the carcass quarters
« Reply #2 on: October 16, 2008, 11:46:12 PM »
As long as it's on ice and kept cold, the moisture is not an issue.  I have no issue with meat in ice water.  I dry it good with an old cotton bath towel, cut it and wrap it.  Been cutting meat for a long time, no issues.  Cold is the name of the game.  Moisture + warm = bacteria.  Moisture + Cold = take your time.

Hope this helps.  Don't panic, just keep your meat on ice and you're fine.

+1




Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39202
  • Location: Rochester
    • robert68
Re: Moisture on the carcass quarters
« Reply #3 on: October 17, 2008, 04:47:33 AM »
I don't think you necessarily need to wait to cut up the meat. I would do it right away if it were me, since you don't have a more convenient way of keeping it cold.

Offline Gobble

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2542
  • Location: Yelm, Wa
  • Wack'em and Stack'em
    • Dave Harder
Re: Moisture on the carcass quarters
« Reply #4 on: October 17, 2008, 06:24:55 AM »
I have to agree with the other guys. I normally age my deer on ice for 3-5 days. Tip the cooler with the petcock open and let the standing water drain off. Keep adding fresh ice to it as needed. If I were you I would cut it up now. Three days of sitting on ice is fine. It should be great eating, I think 7-10 days is too long. IMO

Offline Little Fish

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2007
  • Posts: 399
Re: Moisture on the carcass quarters
« Reply #5 on: October 17, 2008, 09:26:48 AM »
Why wait so long to butcher? The only reason I would wait is if I didn't have time to butcher the animal immediately.

Offline Big10gauge

  • Site Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1306
  • Location: Central Wa
Re: Moisture on the carcass quarters
« Reply #6 on: October 17, 2008, 09:37:59 AM »
Bean Counter, You're doing it exactly the same way as the guys in Texas keep their hogs/deer on ice. Works for them, should work the same up here. Just keep draining the water daily.
[smg id=6490]

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Re: Moisture on the carcass quarters
« Reply #7 on: October 17, 2008, 09:39:21 AM »
Thanks guys  :bow:  :bow: :bow:

I thought most of this stuff before but this is only my second deer I've butchered and the first I've done without any help.  I pretty much had all this in mind but its nice to be sure, esp when your huntin' buddy is counting on you to 'take care of it.'

I heard that 7 days is ideal, as the meat actually gets tougher for the first three days of sitting there.  After those three, up till about 7-10, it starts getting tender again.   :dunno:

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4944
  • Location: Puyallup
Re: Moisture on the carcass quarters
« Reply #8 on: October 17, 2008, 09:40:18 AM »
Dry and cold is best.  I think that allowing the meat to drain blood and dry is best.  I would go ahead and butcher.

Offline bow4elk

  • Pacific Northwest Bowhunting
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 3413
  • Location: Olympia, WA
  • Contact me at: tom@pnwbowhunting.com
    • https://www.facebook.com/pacific.northwest.bowhunting/
    • Pacific Northwest Bowhunting
Re: Moisture on the carcass quarters
« Reply #9 on: October 17, 2008, 10:00:53 AM »
Absolutely agree, sorry I left that point out - Don't wait, just cut and wrap it.  I meant take your time so you do a good job and aren't feeling rushed.  Take a quarter/chunk, cut it, wrap it, toss it in the freezer and repeat till you're done, or spread it out over a couple three days, just not 7-10.  No need, no benefit.
Official Measurer: Pope and Young Club, NW Big Game Inc., National Muzzle Loading Rifle Association, Oregon Shed Hunters
First Hunt Foundation mentor
Washington State R3 Coordinator

Pacific Northwest Bowhunting http://www.pnwbowhunting.com

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Re: Moisture on the carcass quarters
« Reply #10 on: October 17, 2008, 10:08:26 AM »
I thought we had like a four page thread of people sayin' you should wait a long ass time..  :bash:

Some even said they wait until its gettin' slightly moldy/slimy and its the best tastin' venison ever!  Well anyway, I'm heading back out to Spokane for 1.5 days so I since I'm taking today off i guess I'll get to it.

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39202
  • Location: Rochester
    • robert68
Re: Moisture on the carcass quarters
« Reply #11 on: October 17, 2008, 01:30:55 PM »
I don't think you'll ever get any agreement as to how long to wait, or to wait at all. Myself, I have never waited to cut up meat, unless I just didn't have time to do it. I've always done it as soon as possible and it has always turned out good.

Offline Chesapeake

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1045
  • Location: Washougal
Re: Moisture on the carcass quarters
« Reply #12 on: October 17, 2008, 03:29:23 PM »
We have a walk in cooler and often hang our deer 5-7 days. I dont know how much it realy helps. For sure you want to hang it till it goes through rigor. This takes a day or two atleast.

With your setup I would butcher ASAP. Cold and dry is good, for me though, moisture is bad.

Offline PA BEN

  • LINEMAN
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 4877
  • Location: Chewelah
Re: Moisture on the carcass quarters
« Reply #13 on: October 17, 2008, 04:48:00 PM »
Unless it's a stinky old buck, cut it up in 36 hr's. The only thing time does is age the meat. I don't know where you are at but it's cooling down at night enough to hang it out side. :twocents

Offline stumprat

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 1150
  • Location: Chehalis
Re: Moisture on the carcass quarters
« Reply #14 on: October 17, 2008, 09:30:55 PM »
A butcher once told me to cut all mine as soon as i can. Lessens the risk of bacteria. He also said venison does not have fat marbling in the meat. So hanging does nothing for it.

 


* Advertisement

* Recent Topics

Public Land Sale Senate Budget Reconciliation by dreamingbig
[Today at 01:04:15 AM]


GMU 247 Entiat bear hunting by GeoSwan
[Yesterday at 10:23:36 PM]


AKC Australian Shepherd Puppies by TeacherMan
[Yesterday at 09:54:58 PM]


Observatory quality bull rifle by mtndew
[Yesterday at 09:17:55 PM]


New Zealand Hunt by Rufous
[Yesterday at 08:31:39 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by pickardjw
[Yesterday at 07:58:31 PM]


Colockum Archery Bull Tag by crabcreekhunter
[Yesterday at 07:51:37 PM]


Upland Side by Side by pickardjw
[Yesterday at 06:48:15 PM]


American Legion Summer Raffle - $1000 Prize!!! by pianoman9701
[Yesterday at 05:02:37 PM]


Selkirk bull moose. by 10thmountainarcher
[Yesterday at 03:36:22 PM]


North Peninsula Salmon Fishing by Stein
[Yesterday at 02:23:22 PM]


Looking for people to hunt with. by Boss .300 winmag
[Yesterday at 01:21:22 PM]


Primer 157 vs 209 by EnglishSetter
[Yesterday at 11:30:27 AM]


Evergreen youth livestock show and sale by nwwanderer
[Yesterday at 11:06:58 AM]


2025 Quality Chewuch Tag by elkaholic123
[Yesterday at 08:39:45 AM]


Rotator Cuff repair X 2 advice needed by Wood2Sawdust
[Yesterday at 07:49:52 AM]


Tooth age on Quinault bull by nwwanderer
[Yesterday at 06:54:44 AM]


3 days for Kings by Stein
[June 28, 2025, 06:45:11 PM]


Kinda fun LH rimfire rifle project by JDHasty
[June 28, 2025, 06:44:33 PM]


Can’t fish for pinks area 8-2? by WAcoueshunter
[June 28, 2025, 05:22:46 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal