RCBS ROCK CHUCKER SUPREME

[HUNTNORTHWEST]

Looking to get into reloading. I just want a single stage press,  as i am not looking to crank out volume.

Im going to strictly load rifle ammo. Calibers including 223, 270win, 7mm mag and maybe 300wsm.

I like the idea of just being that much more involved into my hunting practices.

My question to everyone is does this RCBS rock chucker supreme kit that is for sale on amazon or midway really a good way to get started? or should I allocate my hard earned taxed income in a different fashion to get started?

Hoping some experienced rifle reloaders can key me in here.

[Wetwoodshunter]

100% yes get the rcbs supreme master set. Then pick up a die or two that is RCBS to make you order over $300 so you can use the $75 RCBS rebate they are offering now.

That kit has about everything you need to start but calipers. It's not super fast I have been doing sets of 40 rounds and weighing every charge with the beam scale it takes me about an hour.

[Wetwoodshunter]

That's how I just started. I added a powder trickler, and calipers before I started loading. Typically I set the powder throw a grain less than desired and trickle the last grain to be exact.

[HUNTNORTHWEST]

Thanks for the feedback. There is just a overwhelming amount of reloading info out on the web and in magazines on gear and brands and preferences you name it.

So a powder trickler and a set of calipers will make all my most (basic) level of gear covered?

[DRobnsn]

Thanks for the feedback. There is just a overwhelming amount of reloading info out on the web and in magazines on gear and brands and preferences you name it.

So a powder trickler and a set of calipers will make all my most (basic) level of gear covered?

Yep, aside from the dies, some reading and the actual loading components that is what you'll need to start up. If you know anyone who loads talking through stuff with them is invaluable as well. I bought my rock chucker kit about 8 years ago. Bought dies and trickler at the same time. Then a hand primer and shortly after got a case trimmer. Now I'm looking to uparade scales but what I have still does the job.

[jasnt]

Don't forget your shell holders. The rcbs kit is great. You'll need calipers and dies and she'll holders, strongly recommend a case trimmer and powder trickler and a bullet puller(at some point your going to need it) I do NOT recommend digital calipers as battery's always die at the worst time

[doubletall]

I don't know if you've considered Hornady, but it's worth comparing to RCBS.  I have the Rockchucker but use the adapter so I can use the Lock and Load bushing and Lock rings.  I like the design of the Hornady lock rings better and swapping dies with the bushing is faster.

[BULLBLASTER]

I don't know if you've considered Hornady, but it's worth comparing to RCBS.  I have the Rockchucker but use the adapter so I can use the Lock and Load bushing and Lock rings.  I like the design of the Hornady lock rings better and swapping dies with the bushing is faster.

the quick change adapters are great!

[HighlandLofts]

For rifle reloading you'll need a shell trimmer as they gain length after firing. After trimming the cases need to be deburred, both inside & out so you'll need a deburring tool.

Cabelas has caliber specific reloading book under $10.

I bought a bunch of reloading books on E-Bay, pick up a Lymans 49th edition. Check out several books on there as the price fluctuates and mast have free shipping.
There are several good reloading books out there, buy a few of them and do some interesting reading.

[DRobnsn]

In case your not sure here is everything the RCBS supreme kit comes with from amazons website:  Press, Reloading Scale, Uniflow Powder Measure, Hand Priming Tool, Case Loading Block, Debur Tool, Hex Key Set, Case Lube Kit, Powder Funnel and Reloading Manual 279.99



I agree you will need a trimmer but I would get started first. The amount of reloading you will actually do will dictate what style of trimmer you will need. If your only loading for a couple calibers and don't shoot allot then a manual trimmer may suit your needs. On the other hand if your loading 1000's of 223 along with others every year you may want to look into the powered units.

[BigGoonTuna]

i just bought this same set about a month back.  so far i've added a trickler and base for the powder measure(they give you the measure but nothing good to mount it with).

i also tried the lee cartridge specific trimmers, so far i like them.  i could see spending money on a faster setup but i'm pretty low volume so they work great for me.

[huntandjeep]

i just bought this same set about a month back.  so far i've added a trickler and base for the powder measure(they give you the measure but nothing good to mount it with).

i also tried the lee cartridge specific trimmers, so far i like them.  i could see spending money on a faster setup but i'm pretty low volume so they work great for me.

The powder measue mounts to the top of the press.
Although I also decided to pick up the dedicated base for it also.

[bobcat]

I use the Lee dippers for my powder measure. Along with a powder trickler and a RCBS scale. Never had a real powder measure. It's a good option if you're just starting out and want to save money.

[jasnt]

I mounted my powder measure off a shelf above my press its out of the way but still handy and the scale sits on the self right at eye level. Makes it quick and accurate

[HUNTNORTHWEST]

good info I'm pretty sold. My tax return is now becoming personal ammo manufacturing.