collapse

Advertisement


Author Topic: First Attempt - Maple Self Bow  (Read 33971 times)

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #45 on: March 04, 2009, 05:17:36 PM »
Got to about the 98th percent done phase today. Will post pics later this evening. in a nutshell i took off too much on the upper limb. The bow shoots well but it might not be destined to live for more than a few years due to that. At some point it was pulling around 63-64 lbs at full draw. It should be lighter than that when it's complete. Just not sure how light.

I worked out a handle, sanded it down, Jay helped me glue on some horned tips, etc. Just need to apply leather handle and put some tru oil on it.

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 12179
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #46 on: March 04, 2009, 05:34:23 PM »
Can't wait to see it.  I've got this "thrill running up my leg" just hearing about it... :chuckle:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #47 on: March 04, 2009, 08:47:40 PM »
I have some polishing to do on the ends where the overlays are. I am going to start putting some tru oil on it tomorrow night after working it over with some steel wool.

This is pretty close to done. Primitive bow...
















Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 12179
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #48 on: March 04, 2009, 09:51:53 PM »
Nice!  I dig the bone tips. 8)  Did that on my son's bow too.
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #49 on: March 04, 2009, 10:18:09 PM »
Let's see your son's bow.  :hello:

Online boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50589
  • Location: Selah, Washington
Re: First Attempt - Maple Self Bow
« Reply #50 on: March 05, 2009, 06:21:26 AM »
Its fun to watch it all come together.  Thanks for keeping us posted with pics. 

Offline lazydrifter

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 763
  • Location: Port Angeles
Re: First Attempt - Maple Self Bow
« Reply #51 on: March 05, 2009, 07:12:07 AM »
what kind of epoxy did you use for the bone tips?  Would gorilla glue work for this?  Looks really nice.

Offline fc2038

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1218
  • Location: Eatonville, Wa.
Re: First Attempt - Maple Self Bow
« Reply #52 on: March 05, 2009, 07:54:05 AM »
lookin good!!!

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #53 on: March 05, 2009, 09:16:02 AM »
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.

Offline bow4elk

  • Pacific Northwest Bowhunting
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 3413
  • Location: Olympia, WA
  • Contact me at: tom@pnwbowhunting.com
    • https://www.facebook.com/pacific.northwest.bowhunting/
    • Pacific Northwest Bowhunting
Re: First Attempt - Maple Self Bow
« Reply #54 on: March 05, 2009, 09:26:01 AM »
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.

No, gorilla glue is not recommended.  Bowgrip 100 epoxy is good stuff.
Official Measurer: Pope and Young Club, NW Big Game Inc., National Muzzle Loading Rifle Association, Oregon Shed Hunters
First Hunt Foundation mentor
Washington State R3 Coordinator

Pacific Northwest Bowhunting http://www.pnwbowhunting.com

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 12179
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #55 on: March 05, 2009, 06:45:58 PM »
Let's see your son's bow.  :hello:

I have been meaning to take some pics of it.  I'll try to remember when I get home tonight.
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline bucklucky

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 9541
  • Location: Skookumchuck Wa.
    • Charlie Smith
Re: First Attempt - Maple Self Bow
« Reply #56 on: March 05, 2009, 08:14:45 PM »
Getting closer!!!! Nice!

Offline robb92

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3685
  • Location: Spokane Wa, Andrews AFB, Maryland and King George, VA
Re: First Attempt - Maple Self Bow
« Reply #57 on: March 05, 2009, 08:25:34 PM »
Very cool, thanks for posting the pics!!!!!
"ITS NOT WHAT THE WISE MAN SAYS BUT WHAT THE WISE MAN DOES IN HIS LIFE THAT MATTERS"


Offline PacificNWhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3599
  • Location: Bonney Lake
Re: First Attempt - Maple Self Bow
« Reply #58 on: March 06, 2009, 08:05:24 AM »
Way cool, thanks for all the pic's and updates

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: First Attempt - Maple Self Bow
« Reply #59 on: March 06, 2009, 08:28:34 AM »
What a great project.  It is looking awesome.  When you removed too much material on the upper limb, can you take off material from the lower limb and just have a lower draw weight?  Or is it in an area that needs a minimum amount of wood, I am guessing closer to the riser?

Looking forward to seeing the final results.  Thanks for the updates and pictures.

Dreams are forever on the mind, realization in the hands.

 


* Advertisement

* Recent Topics

Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by MADMAX
[Today at 11:59:50 AM]


Idaho Trapping Journal 2025/26 by Kingofthemountain83
[Today at 11:29:17 AM]


Cowiche Quality Buck by SkookumHntr
[Today at 11:19:40 AM]


What's your favorite elk hunting cartridge? by TeacherMan
[Today at 09:58:58 AM]


EuroOptic by HntnFsh
[Today at 08:13:05 AM]


Colockum Archery Bull Tag by zwickeyman
[Today at 06:39:41 AM]


Horseshoe Curve Coyote hunt?? by GeoSwan
[Yesterday at 10:35:16 PM]


Collision repair recommendations Bellingham/Sedro Wooley areas by Westside88
[Yesterday at 09:59:25 PM]


Owl by Caseknife
[Yesterday at 08:23:40 PM]


Moose in western washington? by mountainman
[Yesterday at 07:53:45 PM]


Let’s see ur heavy pack out pics by cougkilr
[Yesterday at 07:32:10 PM]


From Behind by Kingofthemountain83
[Yesterday at 04:03:40 PM]


5 Points......(mule deer or blacktails) by boneaddict
[Yesterday at 03:21:45 PM]


Determining tripod value? by highside74
[Yesterday at 01:46:27 PM]


Cell Cams for Westside Elk by kball4
[Yesterday at 01:24:27 PM]


7PRC reloading by Doublelunger
[Yesterday at 12:59:56 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal