collapse

Advertisement


Author Topic: First Attempt - Maple Self Bow  (Read 32298 times)

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #45 on: March 04, 2009, 05:17:36 PM »
Got to about the 98th percent done phase today. Will post pics later this evening. in a nutshell i took off too much on the upper limb. The bow shoots well but it might not be destined to live for more than a few years due to that. At some point it was pulling around 63-64 lbs at full draw. It should be lighter than that when it's complete. Just not sure how light.

I worked out a handle, sanded it down, Jay helped me glue on some horned tips, etc. Just need to apply leather handle and put some tru oil on it.

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11922
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #46 on: March 04, 2009, 05:34:23 PM »
Can't wait to see it.  I've got this "thrill running up my leg" just hearing about it... :chuckle:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #47 on: March 04, 2009, 08:47:40 PM »
I have some polishing to do on the ends where the overlays are. I am going to start putting some tru oil on it tomorrow night after working it over with some steel wool.

This is pretty close to done. Primitive bow...
















Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11922
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #48 on: March 04, 2009, 09:51:53 PM »
Nice!  I dig the bone tips. 8)  Did that on my son's bow too.
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #49 on: March 04, 2009, 10:18:09 PM »
Let's see your son's bow.  :hello:

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50475
  • Location: Selah, Washington
Re: First Attempt - Maple Self Bow
« Reply #50 on: March 05, 2009, 06:21:26 AM »
Its fun to watch it all come together.  Thanks for keeping us posted with pics. 

Offline lazydrifter

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 736
  • Location: Port Angeles
Re: First Attempt - Maple Self Bow
« Reply #51 on: March 05, 2009, 07:12:07 AM »
what kind of epoxy did you use for the bone tips?  Would gorilla glue work for this?  Looks really nice.

Offline fc2038

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1217
  • Location: Eatonville, Wa.
Re: First Attempt - Maple Self Bow
« Reply #52 on: March 05, 2009, 07:54:05 AM »
lookin good!!!

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: First Attempt - Maple Self Bow
« Reply #53 on: March 05, 2009, 09:16:02 AM »
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.

Offline bow4elk

  • Pacific Northwest Bowhunting
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 3413
  • Location: Olympia, WA
  • Contact me at: tom@pnwbowhunting.com
    • https://www.facebook.com/pacific.northwest.bowhunting/
    • Pacific Northwest Bowhunting
Re: First Attempt - Maple Self Bow
« Reply #54 on: March 05, 2009, 09:26:01 AM »
lazydrifter,

I can't remember what we used for gluing on the tips. I'll ask. It certainly was not gorilla glue. Since I have never built a bow before I cannot comment if gorilla glue would be adequate.

No, gorilla glue is not recommended.  Bowgrip 100 epoxy is good stuff.
Official Measurer: Pope and Young Club, NW Big Game Inc., National Muzzle Loading Rifle Association, Oregon Shed Hunters
First Hunt Foundation mentor
Washington State R3 Coordinator

Pacific Northwest Bowhunting http://www.pnwbowhunting.com

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11922
  • Location: Southeast WA
  • Semper Primus
Re: First Attempt - Maple Self Bow
« Reply #55 on: March 05, 2009, 06:45:58 PM »
Let's see your son's bow.  :hello:

I have been meaning to take some pics of it.  I'll try to remember when I get home tonight.
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline bucklucky

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 9541
  • Location: Skookumchuck Wa.
    • Charlie Smith
Re: First Attempt - Maple Self Bow
« Reply #56 on: March 05, 2009, 08:14:45 PM »
Getting closer!!!! Nice!

Offline robb92

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3685
  • Location: Spokane Wa, Andrews AFB, Maryland and King George, VA
Re: First Attempt - Maple Self Bow
« Reply #57 on: March 05, 2009, 08:25:34 PM »
Very cool, thanks for posting the pics!!!!!
"ITS NOT WHAT THE WISE MAN SAYS BUT WHAT THE WISE MAN DOES IN HIS LIFE THAT MATTERS"


Offline PacificNWhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3601
  • Location: Bonney Lake
Re: First Attempt - Maple Self Bow
« Reply #58 on: March 06, 2009, 08:05:24 AM »
Way cool, thanks for all the pic's and updates

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: First Attempt - Maple Self Bow
« Reply #59 on: March 06, 2009, 08:28:34 AM »
What a great project.  It is looking awesome.  When you removed too much material on the upper limb, can you take off material from the lower limb and just have a lower draw weight?  Or is it in an area that needs a minimum amount of wood, I am guessing closer to the riser?

Looking forward to seeing the final results.  Thanks for the updates and pictures.

Dreams are forever on the mind, realization in the hands.

 


* Advertisement

* Recent Topics

2025 OILS! by HillHound
[Today at 02:03:00 AM]


2025 Draw Results by JDArms1240
[Today at 01:55:11 AM]


Norway pass Elk by moocher97
[Today at 12:11:05 AM]


Toutle Quality Bull - Rifle by moocher97
[Today at 12:00:21 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by huntnnw
[Yesterday at 11:20:59 PM]


Mature bulls during late season? by Dark2Dark
[Yesterday at 10:53:27 PM]


Cowiche Unit 368 by Limhangerslayer
[Yesterday at 10:41:37 PM]


Put in for a tag I NEVER thought I would draw. by elkrack
[Yesterday at 10:15:14 PM]


Awesome customer service by deerlick
[Yesterday at 10:13:19 PM]


Commercial crab pots going in today. by Stein
[Yesterday at 09:37:31 PM]


FFL preferences or warnings in Olympia or south Sound area? by ASHQUACK
[Yesterday at 09:34:36 PM]


Boat registration by Stein
[Yesterday at 09:31:52 PM]


Flatlanders coming west in 2024, any WA mule deer outfitter recommendations by Beastmonger1987
[Yesterday at 09:31:21 PM]


2024 deer. Let’s see um! by Beastmonger1987
[Yesterday at 09:11:35 PM]


Muzzy Mission Quality!!! by crabcreekhunter
[Yesterday at 09:11:30 PM]


Unknown Suppressors - Whisper Pickle by xrangerx
[Yesterday at 09:06:49 PM]


Stillaguamish 448 QD rifle tag by Bo_nimrod
[Yesterday at 09:03:46 PM]


Nevada mule deer in the rut, followed by late rifle elk in Arizona by Beastmonger1987
[Yesterday at 08:36:20 PM]


Teanaway bull elk by 1buckdown
[Yesterday at 08:34:43 PM]


Colockum Archery Bull Tag by oldleclercrd
[Yesterday at 08:31:58 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal