collapse

Advertisement


Author Topic: Tiderunner gas tank  (Read 3301 times)

Offline Viking360

  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Dec 2016
  • Posts: 145
  • Location: Kitsap
Tiderunner gas tank
« on: February 07, 2017, 07:18:32 PM »
Hey I have a 2004 palmer tiderunner, noticed a gas leak the other day so ended up pulling the tank today. Found 2 holes in the bottom of the tank after scraping some scale. Does anyone know of anyone that makes aftermarket tanks for this boat?  It is an aluminum tank, I can cut out the bottom and weld a new piece in or build a new tank out of stainless, but might be easier to buy a plastic tank. Any opinions?

Offline Wazntme

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 123
  • Location: Wa
  • Groups: NRA
Re: Tiderunner gas tank
« Reply #1 on: February 07, 2017, 08:12:36 PM »
Go to a plastic tank, if you patch the current tank make sure it's not touching any other metals when it is in its mounting place because of electrolocis, even steel bolts that hold it down will cause the aluminum to fail. As far as a new stainless tank goes you will probably need to mortgage your home to pay for it. Good luck!

Offline Viking360

  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Dec 2016
  • Posts: 145
  • Location: Kitsap
Re: Tiderunner gas tank
« Reply #2 on: February 07, 2017, 08:44:00 PM »
Only thing that touches the tank is nylon straps and fiberglass.

Offline Wazntme

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 123
  • Location: Wa
  • Groups: NRA
Re: Tiderunner gas tank
« Reply #3 on: February 08, 2017, 03:10:14 AM »
Just trying to help. I have been a fabricator for 20 years specializing in aluminum, if you want me to cut out the rotten area and replace let me know. But if you can fit a plastic tank in its place I would do that.

Offline Viking360

  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Dec 2016
  • Posts: 145
  • Location: Kitsap
Re: Tiderunner gas tank
« Reply #4 on: February 08, 2017, 05:22:28 AM »
Thanks for the input, I have the capability of welding in a new piece so might go that route. Only aftermarket plastic tanks I can find are square, mine angles up on the sides to follow the hull.

Offline ASHQUACK

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 961
Re: Tiderunner gas tank
« Reply #5 on: February 08, 2017, 05:32:35 AM »
Check in with a few of the boat places I see plastic tanks all the time that are made for under floor applications as well as bow gas tanks.

Offline Wazntme

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 123
  • Location: Wa
  • Groups: NRA
Re: Tiderunner gas tank
« Reply #6 on: February 08, 2017, 11:45:39 PM »
I can't remember the website but I have seen fuel tanks in all shapes and sizes on it, they had L shaped, U shaped, all sorts. Good luck

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32903
  • Location: Pacific NorthWest
Re: Tiderunner gas tank
« Reply #7 on: February 09, 2017, 02:38:37 AM »
 A buddy of mine replaced his in his Tiderunner last year with a plastic one, he's happy with it.
The things that come to those who wait, may be the things left by those who got there first!

Offline Viking360

  • Trade Count: (+2)
  • Hunter
  • ***
  • Join Date: Dec 2016
  • Posts: 145
  • Location: Kitsap
Re: Tiderunner gas tank
« Reply #8 on: February 09, 2017, 11:28:23 AM »
ok, thanks

Offline j_h_nimrod

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1597
  • Location: Humptulips, WA
Re: Tiderunner gas tank
« Reply #9 on: February 09, 2017, 11:56:40 AM »
Even if you have the ability to weld aluminum I would not chance it with a fuel tank. Primarily because it is almost impossible to prep old dirty aluminum well enough to get a reliable weld. I worked with a number of alum boat builders in SE AK and I don't know how many new or almost new tanks I saw them scrap as opposed to trying to fix. Secondly if there are holes in it already then more will be coming, the most you will be doing is bandaiding a bigger issue.

You should be able to find a poly tank that will fit and last forever. SS will be fairly expensive and you will gain a lot of weight.

 


* Advertisement

* Recent Topics

AUCTION: Custom knife by Alden Cole by HntnFsh
[Today at 06:04:32 PM]


More Kings! by Stein
[Today at 06:00:52 PM]


Taxidermy Issues....HELP! by JWBINX
[Today at 05:37:21 PM]


Spot lock in the salt? by GWP
[Today at 02:45:08 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by dreadi
[Today at 02:09:41 PM]


GPW Trail Closures by Kingofthemountain83
[Today at 01:49:27 PM]


Pre season Archery SALE by BigJs Outdoor Store
[Today at 01:32:46 PM]


Good Fishing Guides in Puget Sound by hiway_99
[Today at 01:17:16 PM]


49 Degrees North Early Bull Moose by B4noon
[Today at 10:42:06 AM]


Challis/salmon idaho packstrings? by 2MANY
[Today at 10:05:30 AM]


Good day of steelhead fishing! by snit
[Today at 08:10:42 AM]


Bonaparte Lake by AntlerHound
[Today at 07:48:39 AM]


Honda BF15A Outboard Problems - FIXED! by pickardjw
[Today at 07:39:38 AM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 06:27:05 AM]


New to bear hunting by JimmyHoffa
[Yesterday at 10:39:22 PM]


Best all around muzzy (updated) by riverrun
[Yesterday at 09:17:25 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal