collapse

Advertisement


Author Topic: Chainsaw question  (Read 6102 times)

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1617
  • Location: Snohomish County
Chainsaw question
« on: December 12, 2018, 12:43:49 PM »
So I have a Stihl chainsaw, one size smaller than the Farm Boss. I opened my carry case for it an saw that a bunch of the bar oil had leaked out. It was sitting in the normal position, not on its side. So I refilled it and left it on a board for a few days and it was leaking again. before I bring it in, is there anything I should check? No visible cracks or anything...and it has been not been abused.
Thanks
Mike

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+17)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5452
  • Location: GPS is searching
Re: Chainsaw question
« Reply #1 on: December 12, 2018, 12:49:07 PM »
@hntrspud
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline MtnMuley

  • Site Sponsor
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Aug 2009
  • Posts: 8711
  • Location: NCW
Re: Chainsaw question
« Reply #2 on: December 12, 2018, 01:05:27 PM »
That tells me your oiler is working well and isn't plugged partially like most.

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50562
  • Location: Selah, Washington
Re: Chainsaw question
« Reply #3 on: December 12, 2018, 01:16:38 PM »
I’m not sure how much it’s leaking, but that’s pretty normal on any saw that’s ever worked right.  Basically along the lines of what he said :yeah:

Offline Angry Perch

  • Past Sponsor
  • Trade Count: (+7)
  • Explorer
  • *****
  • Join Date: Oct 2011
  • Posts: 13360
  • Location: Sammamish/ Sequim
Re: Chainsaw question
« Reply #4 on: December 12, 2018, 01:16:48 PM »
My MS 270 case always has a thick layer of bar oil in the bottom. Keeps the spare chains lubed up! :chuckle:
Low T Beta Male
Domesticated simpy city dwelling male
Low T/ high estrogen = illogical thinking
You must have a learning disability
Low IQ mut [sic] faced bimbo.
You see it here with some of the less intelligent and stable types.
Leveler boy.

Offline Moe the Sleaze

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Sep 2008
  • Posts: 180
Re: Chainsaw question
« Reply #5 on: December 12, 2018, 01:53:17 PM »
I don't think I've ever seen a chainsaw case without oil in the bottom, except for brand-new.

Online tmike

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1390
  • Location: Black Diamond
Re: Chainsaw question
« Reply #6 on: December 12, 2018, 01:57:40 PM »
I had the same problem. It was the cap. Luckily an easy fix.

Offline rasbo

  • Trade Count: (+1)
  • Legend
  • ******
  • Join Date: Aug 2008
  • Posts: 20144
  • Location: Grant county
  • In God I trust...Try taking that away from me!
Re: Chainsaw question
« Reply #7 on: December 12, 2018, 02:01:54 PM »
My huskies have always dripped

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+17)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5452
  • Location: GPS is searching
Re: Chainsaw question
« Reply #8 on: December 12, 2018, 02:02:03 PM »
 :yeah: to what everyone has said. If it just leaks a little thats normal, if it dumps the whole tank overnight thats not normal. I keep a few shop rags in my case and they eventally get oil soaked, just replace them every now and then and the mess is minimal, if you store it long times between use you could just empty the tank before storage. I have a few saws and the worse is the only husky in the mix, no matter what ive done it leaks pretty good, i figure the stihls make it nervous and its just peeing its pants  :chuckle:
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Online Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12174
  • Location: Walla Walla
  • HuntWA Woodblock
Re: Chainsaw question
« Reply #9 on: December 12, 2018, 02:05:18 PM »
:yeah: to what everyone has said. If it just leaks a little thats normal, if it dumps the whole tank overnight thats not normal. I keep a few shop rags in my case and they eventally get oil soaked, just replace them every now and then and the mess is minimal, if you store it long times between use you could just empty the tank before storage. I have a few saws and the worse is the only husky in the mix, no matter what ive done it leaks pretty good, i figure the stihls make it nervous and its just peeing its pants  :chuckle:
Nah, the Husky is just marking it's territory to give all the Stihl's fair warning.  :chuckle:
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1617
  • Location: Snohomish County
Re: Chainsaw question
« Reply #10 on: December 12, 2018, 02:26:10 PM »
I am used to seeing some...but it seemed like a lot more than before... :dunno:

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+17)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5452
  • Location: GPS is searching
Re: Chainsaw question
« Reply #11 on: December 12, 2018, 02:58:35 PM »
My huskies have always dripped
There's a pill for that  :chuckle:
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: Chainsaw question
« Reply #12 on: December 12, 2018, 05:59:13 PM »
I store the saws on their sides, bar up, filler caps down.

As long as you have a good O rings on the caps the oiler won't drip as it's now on the high side.   

make sure you have good caps though  :chuckle:

Offline NOCK NOCK

  • Timberdog Slabs
  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jan 2013
  • Posts: 6826
  • Location: E. Wenatchee
  • Timberdog Live Edge Slabs
    • https://www.facebook.com/profile.php?id=100063502962432
    • Timberdogslabs.com
Re: Chainsaw question
« Reply #13 on: December 12, 2018, 06:45:58 PM »
1. Talk to a Stihl dealer that knows their stuff. There is a fix for excessive oil leakage, don't recall exactly what it is other than something with the oil line they replace (One of my smaller saws has needed this done 2 different times now.)

2. There are actually summer and winter bar oils, wrong one at wrong time of year can cause excessive leaking.
Live edge Slab woods, Log Furniture, Beds, Dressers, Tables, Chairs, Custom signs, Décor, Cedar fencing w/artwork cutting. Supplies
https://www.facebook.com/profile.php?id=100063502962432

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20507
  • Location: Tinker AFB, OK
Re: Chainsaw question
« Reply #14 on: December 12, 2018, 06:56:53 PM »
My huskies have always dripped

Yep mine does too, I pretend it is rust preventative
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

 


* Advertisement

* Recent Topics

From Behind by Pathfinder101
[Today at 04:08:58 PM]


Selkirk bull moose. by Pathfinder101
[Today at 04:07:44 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Ridgerunner
[Today at 04:07:30 PM]


The "King" by bigdub257
[Today at 03:58:02 PM]


Eastern Elk Management by Longfield1
[Today at 03:52:16 PM]


White River late archery by bigtex
[Today at 03:28:14 PM]


What boots? by fishngamereaper
[Today at 03:19:47 PM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 01:09:15 PM]


Range finders & Angle Compensation by steeleywhopper
[Today at 12:41:48 PM]


Got a great deal on a jet sled by EnglishSetter
[Today at 12:07:57 PM]


Diarrhea ? by EnglishSetter
[Today at 12:00:59 PM]


How wide? by Mtnwalker
[Today at 11:29:23 AM]


fur market update/skunk update by Humptulips
[Today at 09:33:08 AM]


Willipa Hills Antlerless tag by GOcougsHunter
[Today at 08:16:59 AM]


Idaho's new Deer/Elk License System by RB
[Today at 06:35:48 AM]


What are some good 12 ga factory loads for predators? by Goshawk
[Yesterday at 08:51:55 PM]


Slick 4 by deer_hnter
[Yesterday at 08:08:53 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal