collapse

Advertisement


Author Topic: What is the SD/ES window you strive to meet, with your hand loads?  (Read 3842 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #15 on: May 28, 2019, 12:53:12 PM »
I watched a video about 'finding the flat spot' over a 2 grain spread e.g. 50-52g, in .3g increments, shooting 6.5creed.  The video explained the rationale for using the chrono to find the flat spot and decide on the load because of 'chrono data'.

It's an appealing thought process, and I think it has a place. 

But for what it's worth--this guy on the video shot this 2 grain spread at 100 yards, 6.5creed, and all shots went into a 1" hole.  It's like the powder charge didn't affect the accuracy all that much.

My thought was to find an accurate load/group first, then try to find the flat spot, since the powder charge may not affect the group in some cases.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6539
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #16 on: May 28, 2019, 02:09:08 PM »
I find it’s easier to find the flat spot the fine tune with seating depth
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10673
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #17 on: May 28, 2019, 02:17:23 PM »
I find it’s easier to find the flat spot the fine tune with seating depth
that's my go to usually. Run a velocity test over the chrony and then tune depth.

Brass prep and consistency is a big part of low ES in my opinion. But let's face it, for most of the ranges guys shoot, an ES of 20-30 isn't gonna make a bit of difference over 10-15. 
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3314
  • Location: Spokane Wa.
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #18 on: May 28, 2019, 02:29:43 PM »
I find it’s easier to find the flat spot the fine tune with seating depth
that's my go to usually. Run a velocity test over the chrony and then tune depth.

Brass prep and consistency is a big part of low ES in my opinion. But let's face it, for most of the ranges guys shoot, an ES of 20-30 isn't gonna make a bit of difference over 10-15.

 :yeah:

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #19 on: May 28, 2019, 03:39:01 PM »
I find it’s easier to find the flat spot the fine tune with seating depth
that's my go to usually. Run a velocity test over the chrony and then tune depth.

Brass prep and consistency is a big part of low ES in my opinion. But let's face it, for most of the ranges guys shoot, an ES of 20-30 isn't gonna make a bit of difference over 10-15.

That's what I'm doing this go around thanks to input from people on this board.  Last go around the shot groups of different charge weights to find the smallest group, but ended up going in circles.

This time around, I shot 3 different bullets, picked the one that grouped best, then did a SD test.  Just did a chrono test this weekend and now onto fine tuning the SD at 100 yards.  Then I'll shoot at longer ranges.

I'm sure I could have made other bullets work, but I didn't want to mess around that much.

I've shot SGKs, accubonds, interlocks, and partitions of various weights with good powder (shooting 30-06).  By far the SGKs and partitions perform best.  Accubonds are finicky.  I just don't care for the groups.  Partitions and SGKs shoot vertical strings almost touching.

To circle back, I see the value in standard dev and finding the flat spot -- but my short experience has shown me that finding a working seating depth first has been a faster approach to getting something dialed.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6539
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #20 on: May 28, 2019, 04:04:25 PM »
When I’m starting load development I’ll start with a low charge.  Load up some 3 shot groups starting at .015” off the landes or mag length which ever is shorter and seat each group deeper by .030”.   
Which ever shot best I’ll use that seating depth for my load work. I shoot a ladder over my chrono ( I use magneto speed, must have an accurate chrono for this!) target dosent matter.   Look for my upper flat spot near max.  Then I’ll load up 5 shot groups and fine tune my seating depth in .005” increments. 
If you don’t have a magneto speed or labradar then you could do 3 shot ladder test at 300 yards.   
This is my method that’s worked well for me.   Yrmv
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #21 on: May 29, 2019, 06:59:10 AM »
When I’m starting load development I’ll start with a low charge.  Load up some 3 shot groups starting at .015” off the landes or mag length which ever is shorter and seat each group deeper by .030”.   
Which ever shot best I’ll use that seating depth for my load work. I shoot a ladder over my chrono ( I use magneto speed, must have an accurate chrono for this!) target dosent matter.   Look for my upper flat spot near max.  Then I’ll load up 5 shot groups and fine tune my seating depth in .005” increments. 
If you don’t have a magneto speed or labradar then you could do 3 shot ladder test at 300 yards.   
This is my method that’s worked well for me.   Yrmv

 :tup:

Yup, thanks!  That's what I did this time; it's been easier and fewer rounds.  I do have a magneto speed too.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6539
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: What is the SD/ES window you strive to meet, with your hand loads?
« Reply #22 on: May 29, 2019, 07:24:07 AM »
When I’m starting load development I’ll start with a low charge.  Load up some 3 shot groups starting at .015” off the landes or mag length which ever is shorter and seat each group deeper by .030”.   
Which ever shot best I’ll use that seating depth for my load work. I shoot a ladder over my chrono ( I use magneto speed, must have an accurate chrono for this!) target dosent matter.   Look for my upper flat spot near max.  Then I’ll load up 5 shot groups and fine tune my seating depth in .005” increments. 
If you don’t have a magneto speed or labradar then you could do 3 shot ladder test at 300 yards.   
This is my method that’s worked well for me.   Yrmv

 :tup:

Yup, thanks!  That's what I did this time; it's been easier and fewer rounds.  I do have a magneto speed too.
hope it works well for you
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal