collapse

Advertisement


Author Topic: Sighting in rifle  (Read 4764 times)

Offline blackpowderhunter

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Apr 2014
  • Posts: 1190
  • Location: Renton
Re: Sighting in rifle
« Reply #15 on: September 22, 2021, 09:09:40 AM »
i'd borrow a chronograph.
not saying your vel. is 2200 fps as calcs would suggest, but its hard to guess around velocity.
some barrels like something more than another, could be a funny batch of powder, whole bunch of stuff.
the weird part is that whatever velocity you're getting, they're grouping nicely  :chuckle: :dunno: :dunno:

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #16 on: September 22, 2021, 10:01:29 AM »
If you arent able to collect actual velocity data, you probably arent going to be able to resolve your issue.  In that case you may be well advised to buy a couple boxes of factory ammo for sight in and hunt until you have a chance to resolve the issues.  If the factory ammo does the same thing then you have other problems to resolve.   :twocents:

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #17 on: September 22, 2021, 10:17:57 AM »
Thanks I never had a issue before with factory ammo, just haven’t found any for over a year and half I have a custom cds dial for that specific ammo not sure if it would throw it off using different ammo with that cds dial .


Sent from my iPhone using Tapatalk

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Sighting in rifle
« Reply #18 on: September 22, 2021, 10:35:42 AM »
If the velocity data you used for the dials doesnt match collected data from your handloads, you will be off your mark.  If your dials were cut from "box" data from your factory ammo, you may have the same problem, however if its close enough it wont show that much until 500 yards or more.

Ill add, yes, I have had CDS dials and have tested 2 rifles that both had them out to 650 yards.
« Last Edit: September 22, 2021, 10:46:05 AM by buckfvr »

Offline Damnimissed

  • Political & Covid-19 Topics
  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Dec 2013
  • Posts: 621
  • Location: Salmon, ID
Re: Sighting in rifle
« Reply #19 on: September 22, 2021, 08:55:43 PM »
FWIW, that is an extremely mild load for RUM. I don’t know anyone running under 90gr of Retumbo. I’m pushing 200gr AccuBonds at 3135fps with 92gr of Retumbo with no real pressure.

Offline Mccabe

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2021
  • Posts: 18
  • Location: Goldendale
    • Don’t have one
  • Groups: Ducks unlimited
Re: Sighting in rifle
« Reply #20 on: September 22, 2021, 09:10:14 PM »
I was just going off the Barnes load data it showed 86 grains as max, I called and talked to customer service he did say I can up it a bit just watch pressures . I did try 86 grains It just isn’t grouping like I am at 84 grains.


Sent from my iPhone using Tapatalk

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1166
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Sighting in rifle
« Reply #21 on: September 22, 2021, 09:26:55 PM »
No offense intended, but how much experience do you have with handloading?  Everyone starts somewhere. It's good that you are asking questions.  I recommend stopping what you're doing and asking a lot more questions.  ;)
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

 


* Advertisement

* Recent Topics

2025 OILS! by hunter399
[Today at 04:35:45 AM]


I’m on a blacktail mission by Turner89
[Yesterday at 11:33:35 PM]


Idaho 2025 Controlled Hunts by TeacherMan
[Yesterday at 10:43:16 PM]


Nooksack Archery Tag by high_hunter
[Yesterday at 10:14:27 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 09:54:06 PM]


Basin elk by hughjorgan
[Yesterday at 09:50:49 PM]


Getting back into dogs by bearpaw
[Yesterday at 09:06:14 PM]


Cowiche Quality Buck by Nwgunner
[Yesterday at 08:55:00 PM]


MA-10 Coho by WAcoueshunter
[Yesterday at 08:50:46 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 08:09:04 PM]


Muzzy Mission Quality!!! by NOCK NOCK
[Yesterday at 07:49:11 PM]


Bow mount trolling motors by Badhabit
[Yesterday at 06:27:53 PM]


Colockum Archery Bull Tag by Smittyk44
[Yesterday at 04:23:53 PM]


49 degrees north late Moose tag by Buzzsaw461
[Yesterday at 04:11:52 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by BULLBLASTER
[Yesterday at 03:53:35 PM]


Mature bulls during late season? by Pete112288
[Yesterday at 03:51:08 PM]


best draw for moose unit wise by deadwoodbuck
[Yesterday at 03:29:03 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Yesterday at 03:23:47 PM]


Vashon Island deer tag by bowhunter_1
[Yesterday at 02:59:43 PM]


Big J's Powder list by BigJs Outdoor Store
[Yesterday at 12:59:31 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal