collapse

Advertisement


Author Topic: Geese reg's question  (Read 1628 times)

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Geese reg's question
« on: September 23, 2010, 11:58:15 AM »
I'm excited for this year's waterfowl season, I'm totally hooked after getting a taste of it last year. I've got all my licenses, but I have a quick question about the regs.

I see there is a "Canada Geese" season and a "Geese" season in the regs. The two seasons don't overlap, but I don't see anything that says you can't hunt canadian geese durring the general geese season. I need a little help interpreting please.

Are we allowed to hunt Canada Geese durring the general geese season?

Thanks!
Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Geese reg's question
« Reply #1 on: September 23, 2010, 12:13:59 PM »
There's white and darks.  The Canda Falls under the 7 sub species of dark Candian Geese.  Brant falls under a sea goose.  Snow's, Ross and Blue Geese fall under light "white" geese.  You will want to figure out which goose management area you would like to hunt in as there are verying restrictions.  The most restricted would be SW Washington, due to duskies and bag limits on them, one per season along with restrictions on cacklers and Aleutians.  If you know which goose management area you are in, I can help you out.  It can be pretty wordy for new guys.  If you don't read through them you may miss the week closures or splits they have.
« Last Edit: September 23, 2010, 12:22:46 PM by h2ofowlr »
Cut em!
It's not the shells!  It's the shooter!

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Re: Geese reg's question
« Reply #2 on: September 23, 2010, 12:50:38 PM »
Thanks! I've read through the regs a few time already, I'm sure I'll be reading them almost daily when it gets closer to duck season... I didn't try for any geese last year because I had trouble figuring out what was what, but I'd really like to get at least one this year.

I will be hunting mostly in Whatcom county which I believe is management area 3. Any help interpreting the regs further would be much apperciated.



Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

Offline Meats

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2009
  • Posts: 87
  • Location: The duck blind
Re: Geese reg's question
« Reply #3 on: September 23, 2010, 06:14:27 PM »
There's white and darks.  The Canda Falls under the 7 sub species of dark Candian Geese.  Brant falls under a sea goose.  Snow's, Ross and Blue Geese fall under light "white" geese.  You will want to figure out which goose management area you would like to hunt in as there are verying restrictions.  The most restricted would be SW Washington, due to duskies and bag limits on them, one per season along with restrictions on cacklers and Aleutians.  If you know which goose management area you are in, I can help you out.  It can be pretty wordy for new guys.  If you don't read through them you may miss the week closures or splits they have.

Now for the real story :P

The "Canada goose" season is for the early resident goose hunt in Sept and only Canada geese may be taken.
It is called the "canada goose" season since specks are also considered a dark goose and they are not open to harvest until the "General season" starting in October.

In the "General goose" season in Oct all canada,spec and snows may be taken but some subspecies of canadas are protected in some goose mgmt areas.

In area 3..................if it flys, it dies.
Daily limit = 4 geese  / possession limit = 8 geese
Lord forgive me for I shoot hens

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Geese reg's question
« Reply #4 on: September 23, 2010, 07:50:06 PM »
Thanks! I've read through the regs a few time already, I'm sure I'll be reading them almost daily when it gets closer to duck season... I didn't try for any geese last year because I had trouble figuring out what was what, but I'd really like to get at least one this year.

I will be hunting mostly in Whatcom county which I believe is management area 3. Any help interpreting the regs further would be much appreciated.

Your pretty much are good to go in Area 3  Oct. 16-20 & Oct. 23 - Jan.30th.  You may get into a few specs in the early season and a snow from time to time, but for the most part you are shooting the big guys.  Have at it.


« Last Edit: September 24, 2010, 07:47:33 AM by bobcat »
Cut em!
It's not the shells!  It's the shooter!

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Re: Geese reg's question
« Reply #5 on: September 24, 2010, 07:43:03 AM »
Sweet, thanks for the help guys!
Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

 


* Advertisement

* Recent Topics

If this is your trap by SWHUNTER
[Yesterday at 10:50:36 PM]


WA Moose scouting by huntnnw
[Yesterday at 10:42:18 PM]


JBLM Archery by Carwash
[Yesterday at 10:20:12 PM]


William o Douglas lakes by buggy
[Yesterday at 10:12:58 PM]


JBLM by Carwash
[Yesterday at 10:08:39 PM]


Looking for Solid 22 LR input by run870
[Yesterday at 09:15:50 PM]


Teanaway bull elk by Stein
[Yesterday at 09:14:42 PM]


49 Degrees North Early Bull Moose by Vandal44
[Yesterday at 07:10:03 PM]


3 days for Kings by Parasite
[Yesterday at 07:02:37 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by dvolmer
[Yesterday at 06:30:50 PM]


Raffle ticket sales 2025 by greenhead_killer
[Yesterday at 06:18:45 PM]


Yakima bow shop by maxwell
[Yesterday at 05:41:04 PM]


Cell cam recommendation for security? by Stein
[Yesterday at 05:01:50 PM]


2025 Montana alternate list by Sakko300wsm
[Yesterday at 03:55:08 PM]


The end? Bird bands. by hdshot
[Yesterday at 03:44:43 PM]


North Sea Fishing trip by BLH69
[Yesterday at 02:05:14 PM]


2025 Crab! by BLH69
[Yesterday at 02:02:40 PM]


Early Huckleberry Bull Moose tag drawn! by MMCCAULEY
[Yesterday at 09:25:10 AM]


Mt. St. Helens Goat by CNELK
[Yesterday at 07:31:32 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal