collapse

Advertisement


Author Topic: Geese reg's question  (Read 1793 times)

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Geese reg's question
« on: September 23, 2010, 11:58:15 AM »
I'm excited for this year's waterfowl season, I'm totally hooked after getting a taste of it last year. I've got all my licenses, but I have a quick question about the regs.

I see there is a "Canada Geese" season and a "Geese" season in the regs. The two seasons don't overlap, but I don't see anything that says you can't hunt canadian geese durring the general geese season. I need a little help interpreting please.

Are we allowed to hunt Canada Geese durring the general geese season?

Thanks!
Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9117
  • Location: In the "Blind"! Go Cougs!
Re: Geese reg's question
« Reply #1 on: September 23, 2010, 12:13:59 PM »
There's white and darks.  The Canda Falls under the 7 sub species of dark Candian Geese.  Brant falls under a sea goose.  Snow's, Ross and Blue Geese fall under light "white" geese.  You will want to figure out which goose management area you would like to hunt in as there are verying restrictions.  The most restricted would be SW Washington, due to duskies and bag limits on them, one per season along with restrictions on cacklers and Aleutians.  If you know which goose management area you are in, I can help you out.  It can be pretty wordy for new guys.  If you don't read through them you may miss the week closures or splits they have.
« Last Edit: September 23, 2010, 12:22:46 PM by h2ofowlr »
Cut em!
It's not the shells!  It's the shooter!

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Re: Geese reg's question
« Reply #2 on: September 23, 2010, 12:50:38 PM »
Thanks! I've read through the regs a few time already, I'm sure I'll be reading them almost daily when it gets closer to duck season... I didn't try for any geese last year because I had trouble figuring out what was what, but I'd really like to get at least one this year.

I will be hunting mostly in Whatcom county which I believe is management area 3. Any help interpreting the regs further would be much apperciated.



Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

Offline Meats

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2009
  • Posts: 87
  • Location: The duck blind
Re: Geese reg's question
« Reply #3 on: September 23, 2010, 06:14:27 PM »
There's white and darks.  The Canda Falls under the 7 sub species of dark Candian Geese.  Brant falls under a sea goose.  Snow's, Ross and Blue Geese fall under light "white" geese.  You will want to figure out which goose management area you would like to hunt in as there are verying restrictions.  The most restricted would be SW Washington, due to duskies and bag limits on them, one per season along with restrictions on cacklers and Aleutians.  If you know which goose management area you are in, I can help you out.  It can be pretty wordy for new guys.  If you don't read through them you may miss the week closures or splits they have.

Now for the real story :P

The "Canada goose" season is for the early resident goose hunt in Sept and only Canada geese may be taken.
It is called the "canada goose" season since specks are also considered a dark goose and they are not open to harvest until the "General season" starting in October.

In the "General goose" season in Oct all canada,spec and snows may be taken but some subspecies of canadas are protected in some goose mgmt areas.

In area 3..................if it flys, it dies.
Daily limit = 4 geese  / possession limit = 8 geese
Lord forgive me for I shoot hens

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9117
  • Location: In the "Blind"! Go Cougs!
Re: Geese reg's question
« Reply #4 on: September 23, 2010, 07:50:06 PM »
Thanks! I've read through the regs a few time already, I'm sure I'll be reading them almost daily when it gets closer to duck season... I didn't try for any geese last year because I had trouble figuring out what was what, but I'd really like to get at least one this year.

I will be hunting mostly in Whatcom county which I believe is management area 3. Any help interpreting the regs further would be much appreciated.

Your pretty much are good to go in Area 3  Oct. 16-20 & Oct. 23 - Jan.30th.  You may get into a few specs in the early season and a snow from time to time, but for the most part you are shooting the big guys.  Have at it.


« Last Edit: September 24, 2010, 07:47:33 AM by bobcat »
Cut em!
It's not the shells!  It's the shooter!

Offline Redstar

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Feb 2009
  • Posts: 365
  • Location: Sedro-Woolley, WA
    • https://www.facebook.com/Makerneer/
    • Makerneer
Re: Geese reg's question
« Reply #5 on: September 24, 2010, 07:43:03 AM »
Sweet, thanks for the help guys!
Need a thing-a-majig? I can help!

3D printing, CNC routing and machining, Laser cutting and engraving, Vinyl cutting, Metal work, Woodwork, custom shirts, a bit of everything!

Now featuring a large format CNC router capable of 4' x 16' and gigantic 3D printing capacity of 16 cubic feet, yes you read right cubic feet!

Checkout more of what I'm up to here https://www.makerneer.com/blog

 


* Advertisement

* Recent Topics

Best state for trophy whitetail or Canada? by High Climber
[Today at 07:08:57 PM]


Where are the elk this year??? by MADMAX
[Today at 06:58:53 PM]


Camp Toilet by Rainier10
[Today at 06:47:48 PM]


Stolen Cams by highcountry_hunter
[Today at 06:18:01 PM]


2026 regs are out by DaNewb
[Today at 06:04:51 PM]


Second Choice by CarbonHunter
[Today at 05:48:10 PM]


Hunting reg’s cover by MADMAX
[Today at 05:46:38 PM]


Kodiak06 '26 trail cam pics by Kingofthemountain83
[Today at 05:42:36 PM]


Big game season proposals by B4noon
[Today at 05:05:59 PM]


12th Annual - 2026 YOUTH TURKEY HUNT CONTEST (enter by Mar 15) by locdown21
[Today at 05:01:31 PM]


Backyard Bobcat Bait by Katalla
[Today at 04:10:25 PM]


Logical reason there should be a spring hunt by vandeman17
[Today at 04:07:24 PM]


Multi season elk by blackdog
[Today at 04:01:34 PM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Today at 01:29:56 PM]


My Daughters first Turkey. by trophyhunt
[Today at 12:26:04 PM]


Youth turkey season 2026 by rosscrazyelk
[Today at 12:06:56 PM]


Gobble Getters Youth Turkey Hunt 2026. 💥 VIDEO💥 by rosscrazyelk
[Today at 12:05:34 PM]


Now we wait(Montana) by Magnum_Willys
[Today at 10:21:03 AM]


Spring Idaho by TeacherMan
[Today at 10:12:09 AM]


Offseason blues by hdshot
[Today at 08:46:11 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal