collapse

Advertisement


Author Topic: Pre-season shooting in the Rock Pit  (Read 1813 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Pre-season shooting in the Rock Pit
« on: September 17, 2021, 09:41:35 AM »
Finally!!! the weather here changed enough I could finally get out to do some shooting. We have a have a terribly dry and hot summer, yesterday the temperature drop into the 70's, actually 66* when I left the house and made the drive to the pit.

Well anyway finally grabbed the 45 Knight Super DISC (FT) and all the stuff I needed and headed out. I was really worried because of my late start that someone else might be there and have the pit tied up... but luck was with me nobody...

Nothing really important to report but thought I would provide my shooting attempt.

This was more or less a trip to check the rifle for the upcoming rifle season here in Idaho.  So the trip wasn't to do a lot of shooting just to see if the rifle would hit where it was pointed.

Set up 5 clays on the basalt wall, set up the shooting bench and began shooting! This pic shows a composite of the event.



After this trip I will not be able to blame the rifle if I were to miss.

Keep shooting muzzleloaders - They are a blast!!

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4512
  • Location: Wet side
Re: Pre-season shooting in the Rock Pit
« Reply #1 on: September 17, 2021, 10:49:50 AM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Pre-season shooting in the Rock Pit
« Reply #2 on: September 17, 2021, 12:04:08 PM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Once you get it through the crown - it really goes down well.  The bullet was originally built for custom ML's using a true 45-70 barrel with deeper grooves.  Most ML's have a shallow groove.

Originally I was resizing the bullet barbs to .454 for loading in a ML but I have since tried just loading the bullet as is. It does take a pretty good thump with my loading block but after that it will go down fairly easily.

This my "Bump Stick"



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal