collapse

Advertisement


Author Topic: Pre-season shooting in the Rock Pit  (Read 1919 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Pre-season shooting in the Rock Pit
« on: September 17, 2021, 09:41:35 AM »
Finally!!! the weather here changed enough I could finally get out to do some shooting. We have a have a terribly dry and hot summer, yesterday the temperature drop into the 70's, actually 66* when I left the house and made the drive to the pit.

Well anyway finally grabbed the 45 Knight Super DISC (FT) and all the stuff I needed and headed out. I was really worried because of my late start that someone else might be there and have the pit tied up... but luck was with me nobody...

Nothing really important to report but thought I would provide my shooting attempt.

This was more or less a trip to check the rifle for the upcoming rifle season here in Idaho.  So the trip wasn't to do a lot of shooting just to see if the rifle would hit where it was pointed.

Set up 5 clays on the basalt wall, set up the shooting bench and began shooting! This pic shows a composite of the event.



After this trip I will not be able to blame the rifle if I were to miss.

Keep shooting muzzleloaders - They are a blast!!

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4607
  • Location: Wet side
Re: Pre-season shooting in the Rock Pit
« Reply #1 on: September 17, 2021, 10:49:50 AM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Pre-season shooting in the Rock Pit
« Reply #2 on: September 17, 2021, 12:04:08 PM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Once you get it through the crown - it really goes down well.  The bullet was originally built for custom ML's using a true 45-70 barrel with deeper grooves.  Most ML's have a shallow groove.

Originally I was resizing the bullet barbs to .454 for loading in a ML but I have since tried just loading the bullet as is. It does take a pretty good thump with my loading block but after that it will go down fairly easily.

This my "Bump Stick"



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Put a ring on it by pashok23
[Today at 05:12:25 PM]


Idaho on the verge of outlawing by trophyhunt
[Today at 05:07:05 PM]


Idaho Non-res hunt draw by Caseknife
[Today at 04:31:39 PM]


Long shot by Caseknife
[Today at 04:25:09 PM]


The Lookback by Caseknife
[Today at 04:15:42 PM]


Who knows electric bikes? looking at Quietkat options by hookr88
[Today at 03:50:53 PM]


Pack/ backpack to carry a folding long and edc etc.? by Sakko300wsm
[Today at 03:50:51 PM]


Blackstone newbie by Sakko300wsm
[Today at 03:44:09 PM]


Shooting someone else's injured buck - etiquette question by HntnFsh
[Today at 01:49:45 PM]


Really would you send your dog? by EnglishSetter
[Today at 01:20:19 PM]


Kubota repair shop by Ridgeratt
[Today at 10:29:47 AM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 09:34:17 AM]


The Hunt for a Next level buck… by teanawayslayer
[Today at 08:13:39 AM]


Montana Cutting Deer Licenses by MMCCAULEY
[Today at 08:07:07 AM]


GM 6.6l gas 6 speed vs. 10 speed? by Happy Gilmore
[Today at 12:51:24 AM]


Rut Buddies by 270Flat
[Yesterday at 11:10:04 PM]


more mass?, not sure I care by Pathfinder101
[Yesterday at 09:44:27 PM]


Perfect evening hunt by Caseknife
[Yesterday at 07:17:56 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal