collapse

Advertisement


Author Topic: Pre-season shooting in the Rock Pit  (Read 1916 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Pre-season shooting in the Rock Pit
« on: September 17, 2021, 09:41:35 AM »
Finally!!! the weather here changed enough I could finally get out to do some shooting. We have a have a terribly dry and hot summer, yesterday the temperature drop into the 70's, actually 66* when I left the house and made the drive to the pit.

Well anyway finally grabbed the 45 Knight Super DISC (FT) and all the stuff I needed and headed out. I was really worried because of my late start that someone else might be there and have the pit tied up... but luck was with me nobody...

Nothing really important to report but thought I would provide my shooting attempt.

This was more or less a trip to check the rifle for the upcoming rifle season here in Idaho.  So the trip wasn't to do a lot of shooting just to see if the rifle would hit where it was pointed.

Set up 5 clays on the basalt wall, set up the shooting bench and began shooting! This pic shows a composite of the event.



After this trip I will not be able to blame the rifle if I were to miss.

Keep shooting muzzleloaders - They are a blast!!

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4603
  • Location: Wet side
Re: Pre-season shooting in the Rock Pit
« Reply #1 on: September 17, 2021, 10:49:50 AM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Pre-season shooting in the Rock Pit
« Reply #2 on: September 17, 2021, 12:04:08 PM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Once you get it through the crown - it really goes down well.  The bullet was originally built for custom ML's using a true 45-70 barrel with deeper grooves.  Most ML's have a shallow groove.

Originally I was resizing the bullet barbs to .454 for loading in a ML but I have since tried just loading the bullet as is. It does take a pretty good thump with my loading block but after that it will go down fairly easily.

This my "Bump Stick"



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

What are you cooking? by EnglishSetter
[Today at 12:36:52 AM]


Shout out to bad-ss outdoor gear! by buglebuster
[Yesterday at 11:08:18 PM]


Real world feedback needed: Rangefinder Binos by teanawayslayer
[Yesterday at 10:25:19 PM]


One of my Wowzhers by deer_hnter
[Yesterday at 09:48:58 PM]


Illinois, No Doubter by Birdguy
[Yesterday at 07:14:46 PM]


How to change email? by boneaddict
[Yesterday at 07:11:41 PM]


Late Alta Muzzy by Schmalzfam
[Yesterday at 05:10:16 PM]


Canning Wild Game by Whitpirate
[Yesterday at 04:24:26 PM]


Big old and heavy by Pathfinder101
[Yesterday at 02:32:30 PM]


Pepper Jack tillimook by Fidelk
[Yesterday at 02:30:19 PM]


Thanksgiving duck hunt by metlhead
[Yesterday at 12:34:23 PM]


What boots? by fishngamereaper
[Yesterday at 10:46:03 AM]


One-Day Approval!!! by pianoman9701
[Yesterday at 10:34:17 AM]


Wowzers by shotguunar
[Yesterday at 10:18:25 AM]


CWD test results 🤤🤫 by baldopepper
[Yesterday at 09:50:23 AM]


High n Dry gear by GWP
[Yesterday at 09:13:20 AM]


Hunting with a suppressor - dumb idea? by b23
[Yesterday at 09:01:46 AM]


Idaho/Montana elk/deer lodges by Hiker82
[Yesterday at 08:49:34 AM]


November 26,02025 Hunt by Delta Duckman
[Yesterday at 07:13:29 AM]


GMU 111 antlered moose advice request by teanawayslayer
[November 26, 2025, 10:20:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal