collapse

Advertisement


Author Topic: Pre-season shooting in the Rock Pit  (Read 1910 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Pre-season shooting in the Rock Pit
« on: September 17, 2021, 09:41:35 AM »
Finally!!! the weather here changed enough I could finally get out to do some shooting. We have a have a terribly dry and hot summer, yesterday the temperature drop into the 70's, actually 66* when I left the house and made the drive to the pit.

Well anyway finally grabbed the 45 Knight Super DISC (FT) and all the stuff I needed and headed out. I was really worried because of my late start that someone else might be there and have the pit tied up... but luck was with me nobody...

Nothing really important to report but thought I would provide my shooting attempt.

This was more or less a trip to check the rifle for the upcoming rifle season here in Idaho.  So the trip wasn't to do a lot of shooting just to see if the rifle would hit where it was pointed.

Set up 5 clays on the basalt wall, set up the shooting bench and began shooting! This pic shows a composite of the event.



After this trip I will not be able to blame the rifle if I were to miss.

Keep shooting muzzleloaders - They are a blast!!

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4600
  • Location: Wet side
Re: Pre-season shooting in the Rock Pit
« Reply #1 on: September 17, 2021, 10:49:50 AM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Pre-season shooting in the Rock Pit
« Reply #2 on: September 17, 2021, 12:04:08 PM »
Nice shooting!!  Sing without a sabot how is it pushing it down the barrel?

Once you get it through the crown - it really goes down well.  The bullet was originally built for custom ML's using a true 45-70 barrel with deeper grooves.  Most ML's have a shallow groove.

Originally I was resizing the bullet barbs to .454 for loading in a ML but I have since tried just loading the bullet as is. It does take a pretty good thump with my loading block but after that it will go down fairly easily.

This my "Bump Stick"



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Aladdin unit 111 mule deer quality tag by Kingofthemountain83
[Yesterday at 10:53:40 PM]


What are you cooking? by Pnwrider
[Yesterday at 10:27:08 PM]


My 2025 Montana Buck by JDArms1240
[Yesterday at 10:18:25 PM]


Break my heart - Archery World is closing by Ric0
[Yesterday at 08:23:29 PM]


GM 6.6l gas 6 speed vs. 10 speed? by Birdguy
[Yesterday at 08:15:47 PM]


Where to find hunting mentors/etc in western wa (archery) by high_hunter
[Yesterday at 08:14:54 PM]


2025 deer, let's see em! by MADMAX
[Yesterday at 08:10:14 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by dblungshot
[Yesterday at 06:38:26 PM]


Spotting scope mounting plate by Crunchy
[Yesterday at 04:36:19 PM]


High n Dry gear by Pete112288
[Yesterday at 03:30:29 PM]


Pants for wet brush? by Humptulips
[Yesterday at 03:06:03 PM]


My 2025 Wyoming trip by REHJWA
[Yesterday at 01:03:15 PM]


Bobcat Scent Lures on the Westside by Humptulips
[Yesterday at 11:41:38 AM]


What are some good 12 ga factory loads for predators? by Kingofthemountain83
[Yesterday at 11:22:03 AM]


2025 Quality Chewuch Tag by Falcon
[Yesterday at 09:02:38 AM]


Couple crazy Montana bucks by Buckhunter24
[Yesterday at 08:27:26 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal