collapse

Advertisement


Author Topic: What do I need to know about clamming  (Read 8268 times)

Offline chuckster

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2011
  • Posts: 87
  • Location: Cheney
What do I need to know about clamming
« on: February 06, 2015, 09:22:54 PM »
Am from eastern Washington but have a three day weekend next week and going to visit family in Blaine that live right next to the beach. While there I would like to try clamming but it seems complicated, such as the tides being right, the bio toxin levels good, and the season open on the clams you are digging. Its kinda intimidating for some one who know nothing about it, but if this is a doable thing, next weekend I would love some advise on how to go about it

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: What do I need to know about clamming
« Reply #1 on: February 06, 2015, 10:47:53 PM »
Someone will chime in on tides.  Go before low tide is reached with the lowest tide a better option. If the beaches are open, toxins have been checked and are OK, I presume. It can be a bust if it is raining heavily, as it washes away the sign. It is a breeze.  Watch for a few minutes and you'll get the gist.

Each digger needs their own container and must dig for themselves.  There are other threads here on digging with kids.

Offline duckmen1

  • Non-Hunting Topics
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jun 2009
  • Posts: 2554
  • Location: outdoors
Re: What do I need to know about clamming
« Reply #2 on: February 07, 2015, 09:11:03 AM »
I start 2 hours before absolute low tide and follow it out. The lower it gets the better they show. Got my limit within a half hour last weekend. Im no expert but I start my hole with a clam shovel and finish digging by hand. Dig quick and have fun. I dig for razors.
Maturity is when you have the power to destroy someone who did you wrong but instead you breathe, walk away, and let life take care of them.

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39203
  • Location: Rochester
    • robert68
Re: What do I need to know about clamming
« Reply #3 on: February 07, 2015, 09:13:25 AM »
Where he's going there aren't any razor clams, and I don't know anything about digging anything but razor clams.

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: What do I need to know about clamming
« Reply #4 on: February 07, 2015, 09:16:57 AM »
Yeah, it depends on what your after  :dunno:

If your goig after razor clams on the ocean, you need a clam gun, and low tide to find them.


If your going after butter clams of the sort, and are on rocky beach, a rake is best used.

So again, where and what are you after  :dunno:
Gasman


It's 5 O'clock somewhere.......

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: What do I need to know about clamming
« Reply #5 on: February 07, 2015, 09:20:33 AM »
http://wdfw.wa.gov/fishing/shellfish/beaches/MapArea/01/

Some of the beaches in the area are closed year round..

Offline L-ofalab

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2012
  • Posts: 265
  • Location: Spokane
Re: What do I need to know about clamming
« Reply #6 on: February 07, 2015, 09:39:13 AM »
 :yeah:

I clam often in the San Juans, close by where you are going. I would wear hip waders and maybe pad the knees. Little necks, manila, horse, butter, and cockles can be had in your area. I use a small garden shovel as soon as the tide gets to +1.5 it is easy to find them. Little neck steamer clams are usually on a beach that has medium sized gravel mixed with sand. You need to measure them with calipers. You can do a search on you tube maybe and find video.

https://www.youtube.com/watch?v=DbrEqHMEldw
« Last Edit: February 07, 2015, 10:30:13 AM by L-ofalab »
A smart dog will bring 2 beverages to save a trip to the fridge!

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: What do I need to know about clamming
« Reply #7 on: February 07, 2015, 09:39:39 AM »
Where he's going there aren't any razor clams, and I don't know anything about digging anything but razor clams.

You're right.  It was late and I presumed razor clams.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Re: What do I need to know about clamming
« Reply #8 on: February 08, 2015, 09:03:18 PM »
Little necks and manilla clam will be very close to the surface. Usually in rocky areas near the high tide line. Cockles are also near the surface a few inches deeper than the steamers. I don't care for them so don't usually harvest for other than crab bait. Horse clans are much deeper. Sometimes 12 to 18 inches deep. I stick my finger in the show and if I feel a good sized neck suck down I dig to the side of the show and follow the neck down. Good luck out there. Not all beaches have all kinds of clams.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: What do I need to know about clamming
« Reply #9 on: February 08, 2015, 11:45:07 PM »
If you get into clams, go sideways staying at the same level.

I love cockles, they are sweeter than the Manilas.   :drool:

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: What do I need to know about clamming
« Reply #10 on: February 09, 2015, 01:32:47 AM »
My tip is to leave the expensive hunting boots at home.  Salt water has destroyed more than one pair of my favorite boots!  Waders, Muck or some old junkers are usually what I wear for clamming.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 8161
Re: What do I need to know about clamming
« Reply #11 on: February 09, 2015, 10:03:08 AM »
Wear rubbers an start 2 hrs b4 dig times. I like using the gun over the shovel. Once you get the angle you won't break as many  :twocents:  ;)
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: What do I need to know about clamming
« Reply #12 on: February 09, 2015, 12:16:13 PM »
Wear rubbers an start 2 hrs b4 dig times. I like using the gun over the shovel. Once you get the angle you won't break as many  :twocents:  ;)

He's clamming in gravel, not for razors, guns are tough on the north sound beaches.   :chuckle:

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 8161
Re: What do I need to know about clamming
« Reply #13 on: February 10, 2015, 11:26:18 AM »
lol oop's.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline chuckster

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2011
  • Posts: 87
  • Location: Cheney
Re: What do I need to know about clamming
« Reply #14 on: February 11, 2015, 07:28:58 PM »
I saw a razor clam dig was opened for Sunday the 15th would I be better off driving south on Sunday for that. And by the way thank you very much for all the input. 

 


* Advertisement

* Recent Topics

3 pintails by hunterednate
[Today at 10:43:46 AM]


KODIAK06 2025 trail cam and personal pics thread by hunter399
[Today at 10:29:40 AM]


2025 Montana alternate list by Wingin it
[Today at 09:58:46 AM]


GROUSE 2025...the Season is looming! by EnglishSetter
[Today at 09:41:07 AM]


Sockeye Numbers by treeclimber2852
[Today at 09:17:15 AM]


Modified game cart... 🛒 by Dan-o
[Today at 08:44:37 AM]


Velvet by Brute
[Today at 08:37:08 AM]


Calling Bears by hunter399
[Today at 06:12:44 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by bustedoldman
[Today at 06:10:08 AM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Today at 05:43:11 AM]


Lizard Cam by NOCK NOCK
[Today at 04:48:54 AM]


50 inch SXS and Tracks? by bearpaw
[Today at 12:53:11 AM]


Pocket Carry by Westside88
[Yesterday at 09:33:35 PM]


2025 Coyotes by JakeLand
[Yesterday at 07:15:03 PM]


Toutle Quality Bull - Rifle by Yeti419
[Yesterday at 06:11:55 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 02:14:23 PM]


2025 Crab! by Stein
[Yesterday at 01:48:55 PM]


Sauk Unit Youth Elk Tips by Kales15
[Yesterday at 01:04:52 PM]


Price on brass? by Magnum_Willys
[Yesterday at 12:18:54 PM]


Utah cow elk hunt by kselkhunter
[Yesterday at 09:03:55 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal