collapse

Advertisement


Author Topic: What do I need to know about clamming  (Read 8281 times)

Offline chuckster

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2011
  • Posts: 87
  • Location: Cheney
What do I need to know about clamming
« on: February 06, 2015, 09:22:54 PM »
Am from eastern Washington but have a three day weekend next week and going to visit family in Blaine that live right next to the beach. While there I would like to try clamming but it seems complicated, such as the tides being right, the bio toxin levels good, and the season open on the clams you are digging. Its kinda intimidating for some one who know nothing about it, but if this is a doable thing, next weekend I would love some advise on how to go about it

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: What do I need to know about clamming
« Reply #1 on: February 06, 2015, 10:47:53 PM »
Someone will chime in on tides.  Go before low tide is reached with the lowest tide a better option. If the beaches are open, toxins have been checked and are OK, I presume. It can be a bust if it is raining heavily, as it washes away the sign. It is a breeze.  Watch for a few minutes and you'll get the gist.

Each digger needs their own container and must dig for themselves.  There are other threads here on digging with kids.

Offline duckmen1

  • Non-Hunting Topics
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jun 2009
  • Posts: 2554
  • Location: outdoors
Re: What do I need to know about clamming
« Reply #2 on: February 07, 2015, 09:11:03 AM »
I start 2 hours before absolute low tide and follow it out. The lower it gets the better they show. Got my limit within a half hour last weekend. Im no expert but I start my hole with a clam shovel and finish digging by hand. Dig quick and have fun. I dig for razors.
Maturity is when you have the power to destroy someone who did you wrong but instead you breathe, walk away, and let life take care of them.

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39203
  • Location: Rochester
    • robert68
Re: What do I need to know about clamming
« Reply #3 on: February 07, 2015, 09:13:25 AM »
Where he's going there aren't any razor clams, and I don't know anything about digging anything but razor clams.

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: What do I need to know about clamming
« Reply #4 on: February 07, 2015, 09:16:57 AM »
Yeah, it depends on what your after  :dunno:

If your goig after razor clams on the ocean, you need a clam gun, and low tide to find them.


If your going after butter clams of the sort, and are on rocky beach, a rake is best used.

So again, where and what are you after  :dunno:
Gasman


It's 5 O'clock somewhere.......

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: What do I need to know about clamming
« Reply #5 on: February 07, 2015, 09:20:33 AM »
http://wdfw.wa.gov/fishing/shellfish/beaches/MapArea/01/

Some of the beaches in the area are closed year round..

Offline L-ofalab

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2012
  • Posts: 265
  • Location: Spokane
Re: What do I need to know about clamming
« Reply #6 on: February 07, 2015, 09:39:13 AM »
 :yeah:

I clam often in the San Juans, close by where you are going. I would wear hip waders and maybe pad the knees. Little necks, manila, horse, butter, and cockles can be had in your area. I use a small garden shovel as soon as the tide gets to +1.5 it is easy to find them. Little neck steamer clams are usually on a beach that has medium sized gravel mixed with sand. You need to measure them with calipers. You can do a search on you tube maybe and find video.

https://www.youtube.com/watch?v=DbrEqHMEldw
« Last Edit: February 07, 2015, 10:30:13 AM by L-ofalab »
A smart dog will bring 2 beverages to save a trip to the fridge!

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: What do I need to know about clamming
« Reply #7 on: February 07, 2015, 09:39:39 AM »
Where he's going there aren't any razor clams, and I don't know anything about digging anything but razor clams.

You're right.  It was late and I presumed razor clams.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Re: What do I need to know about clamming
« Reply #8 on: February 08, 2015, 09:03:18 PM »
Little necks and manilla clam will be very close to the surface. Usually in rocky areas near the high tide line. Cockles are also near the surface a few inches deeper than the steamers. I don't care for them so don't usually harvest for other than crab bait. Horse clans are much deeper. Sometimes 12 to 18 inches deep. I stick my finger in the show and if I feel a good sized neck suck down I dig to the side of the show and follow the neck down. Good luck out there. Not all beaches have all kinds of clams.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: What do I need to know about clamming
« Reply #9 on: February 08, 2015, 11:45:07 PM »
If you get into clams, go sideways staying at the same level.

I love cockles, they are sweeter than the Manilas.   :drool:

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: What do I need to know about clamming
« Reply #10 on: February 09, 2015, 01:32:47 AM »
My tip is to leave the expensive hunting boots at home.  Salt water has destroyed more than one pair of my favorite boots!  Waders, Muck or some old junkers are usually what I wear for clamming.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 8165
Re: What do I need to know about clamming
« Reply #11 on: February 09, 2015, 10:03:08 AM »
Wear rubbers an start 2 hrs b4 dig times. I like using the gun over the shovel. Once you get the angle you won't break as many  :twocents:  ;)
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: What do I need to know about clamming
« Reply #12 on: February 09, 2015, 12:16:13 PM »
Wear rubbers an start 2 hrs b4 dig times. I like using the gun over the shovel. Once you get the angle you won't break as many  :twocents:  ;)

He's clamming in gravel, not for razors, guns are tough on the north sound beaches.   :chuckle:

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 8165
Re: What do I need to know about clamming
« Reply #13 on: February 10, 2015, 11:26:18 AM »
lol oop's.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline chuckster

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2011
  • Posts: 87
  • Location: Cheney
Re: What do I need to know about clamming
« Reply #14 on: February 11, 2015, 07:28:58 PM »
I saw a razor clam dig was opened for Sunday the 15th would I be better off driving south on Sunday for that. And by the way thank you very much for all the input. 

 


* Advertisement

* Recent Topics

Lynx kittens confirmed in the Kettle Range by BA Mongor
[Today at 04:21:17 PM]


Best all around muzzy (updated) by Smokeploe
[Today at 04:06:43 PM]


2025 Crab! by KP-Skagit
[Today at 03:52:38 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Dan-o
[Today at 03:40:46 PM]


2025 Montana alternate list by Sakko300wsm
[Today at 01:58:49 PM]


Oregon special tag info by Judespapa
[Today at 12:24:57 PM]


wings wings and more wings! by birddogdad
[Today at 11:27:43 AM]


Sockeye Numbers by CP
[Today at 10:51:20 AM]


50 inch SXS and Tracks? by luvmystang67
[Today at 10:10:54 AM]


Archery elk gear, 2025. by Drewski
[Today at 10:03:17 AM]


10 years ago- Now by MackDaddy509
[Today at 08:57:48 AM]


Kings by hookr88
[Today at 06:51:45 AM]


MA 6 EAST fishing report? by hookr88
[Today at 06:50:41 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Gentrys
[Yesterday at 09:23:31 PM]


Accura MR-X 45 load development by Karl Blanchard
[Yesterday at 08:50:29 PM]


Nevada bull hunt 2025 by Karl Blanchard
[Yesterday at 03:20:09 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by highside74
[Yesterday at 01:27:51 PM]


Toutle Quality Bull - Rifle by lonedave
[Yesterday at 12:58:20 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal