scope help

[2labs]

Your pic shows your rings against the bell! Move it forward and torque it at 20 inch. And try again.

[deerhunter_98520]

ill move it a little and try it 

[2labs]

Hey for what it's worth, you have almost zero clearance between your bell and barrel.
I see ring marks an inch back?

[deerhunter_98520]

I never noticed that....it's really close...I'll move that forward

[grundy53]

1 inch tube? Or 30mms?

[CAMPMEAT]

Buy some DEDNUTZ mounts. I use them on all my guns if I can. Zero problems. 2 piece mounts aren't my cup of Jack Daniels.

[Taco280AI]

Pretty sure it's just a bad rifle. Best send it my way and get a new one

[deerhunter_98520]

1" tube

If I didn't only have $700 into the rifle and scope I still wouldn't get rid of it 

[jasnt]

Sounds like a problem with the scope to me. Like said check all hardware and retry or try the other scope.  But being this is a rifle you know will shoot I'd just send in the scope. Jmo

[T Pearce]

ill move it a little and try it 

[deerhunter_98520]

i moved the scope about 1" back and went out and shot it and got 2 to group then had a stray...im shooting remington factory ammo so i changed it up and got a box of federal to try and they grouped alot better....i got a 3 shot 1" group at 100yds with all the holes touching with shootin sticks....alot better than the other day....im sure i could have done better with a table and rest but im happy for now with the results...thanks for helpin guys...i would have over looked that simple mistake and probably sent the scope in 

[2labs]

Everybody has a flyer. Like a good kid that minds most the time
Glad ya figured it out!

[grundy53]

Nice. Glad you got it figured out.

[Blacktail Sniper]

 

[coachcw]

Nice . I've had good luck with fedral premiums over the years.