collapse

Advertisement


Author Topic: Need metal RV cover, suggestions??  (Read 14790 times)

Offline Forks

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Apr 2013
  • Posts: 608
  • Location: McCleary
  • Groups: NRA Phes. Forev.
Re: Need metal RV cover, suggestions??
« Reply #15 on: April 07, 2019, 02:39:29 PM »
I’m looking into plans of pole buildings, going to see if a lumber package will be cheaper, and build it myself.
\

Rochester Lumber if you're close.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6482
  • Location: Toledo
Re: Need metal RV cover, suggestions??
« Reply #16 on: April 07, 2019, 03:54:59 PM »
I’m looking into plans of pole buildings, going to see if a lumber package will be cheaper, and build it myself.
Problem with a pole bldg.is you need a permit which also involes the "storm water run off" Gestapo

Same with a metal canopy if its over 200 Sq. Feet in this county.

Offline Tim in Wa.

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Jun 2011
  • Posts: 173
  • Location: Poulsbo
Re: Need metal RV cover, suggestions??
« Reply #17 on: April 07, 2019, 04:05:26 PM »
I don't think so because they are not  considered permanent

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6482
  • Location: Toledo
Re: Need metal RV cover, suggestions??
« Reply #18 on: April 07, 2019, 05:48:57 PM »
I don't think so because they are not  considered permanent

That's how John was selling them in Chehalis. No permit needed. Then the assessor started reporting them to the county and the building department went after something like 300 people that bought carports from him and didn't get a building permit. I had to get a permit for mine. This is in Lewis county.

Online CarbonHunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2014
  • Posts: 1250
  • Location: Carbonado
  • Groups: RMEF, WSB
Re: Need metal RV cover, suggestions??
« Reply #19 on: April 07, 2019, 06:58:46 PM »
I would be surprised if you could get lumber, roofing and concrete for less than the cost of a metal structure.

Online Pnwrider

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 778
  • Location: PNW
Re: Need metal RV cover, suggestions??
« Reply #20 on: April 07, 2019, 09:14:31 PM »
Tagging need to get a 30x10x12 or so. Those prices above seem super reasonable considering what I’ve been paying for a storage unit...

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6482
  • Location: Toledo
Re: Need metal RV cover, suggestions??
« Reply #21 on: April 08, 2019, 08:03:40 AM »
I would be surprised if you could get lumber, roofing and concrete for less than the cost of a metal structure.

I doubt it would be less, but if your pouring cement the cost would be close to the same no matter which structure your putting it in. With a pole building you will have a way better building. If that's a consideration.

Offline Tim in Wa.

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Jun 2011
  • Posts: 173
  • Location: Poulsbo
Re: Need metal RV cover, suggestions??
« Reply #22 on: April 08, 2019, 08:18:24 AM »
I don't think so because they are not  considered permanent

That's how John was selling them in Chehalis. No permit needed. Then the assessor started reporting them to the county and the building department went after something like 300 people that bought carports from him and didn't get a building permit. I had to get a permit for mine. This is in Lewis county.
I guess that should not surprise me but it does disappoint me.
 I know most counties have " eyes in the sky" now so catching it wouldn't be random or neighbors turning you in.
 " Bigger the government the smaller the citizen"
Idaho looks better every day
Tim

Offline lastmk8

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2010
  • Posts: 406
  • Location: Poulsbo
Re: Need metal RV cover, suggestions??
« Reply #23 on: April 08, 2019, 09:42:45 AM »
I also used Cover Your Toys for my building, and it is a BIG ONE @ 45' X 30' and 14" at the sides.  Very happy with the product and after one RV and not being covered when not in use, I can say that we were not going to let that happen again.  I see one talking about what structure they should go with if moving in 7 to 10 years?  Well go with something or you may not have an RV left in 7 to 10 years with our weather out here on the Wet Side. 

Once you cross 14" high (it may be slightly less than that) you have to have the double legs so that added to my cost and also added the cantilever front just to give myself a little more wiggle room slinging that things around on my property, I have some big trees and landscaping that doesn't always make it easy.

Overall, very pleased with the outcome and all the extra room I have (I do someday plan on picking up a cargo trailer for maybe making a specialized off-road deep woods hunting rig).  For now plenty of room for the 5th wheel, slides out and even take in a camp fire under cover if we want... yea, we did do that this weekend.. hahaha....     

Offline ruttnbuck

  • blacktail finatic
  • Non-Hunting Topics
  • Trade Count: (+5)
  • Scout
  • ****
  • Join Date: Oct 2008
  • Posts: 356
  • Location: Rochester
Re: Need metal RV cover, suggestions??
« Reply #24 on: May 05, 2019, 08:47:51 AM »
I used metal mill in chehalis a couple years ago and bought a 30x12x12  for about 2k delivered.  I installed which was a pain in the butt,  I recommend whomever you use pay the extra for them to install..

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Legend
  • *****
  • Join Date: Nov 2008
  • Posts: 20015
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Need metal RV cover, suggestions??
« Reply #25 on: May 05, 2019, 08:57:27 AM »
I went with Randy at Cover your toys for my shelter, put the down money on it last week.  Expect it in about 4 to 6 weeks, cost was around 4,500 after taxes.  Randy seems like a good guy, likes phone calls and not texting, old fashion type guy.  We are getting a 35x18x13, covered on sunny side, one panel on the other side, open front and back.
“In common with”..... not so much!!

Offline MADMAX

  • Trade Count: (+23)
  • Explorer
  • ******
  • Join Date: May 2007
  • Posts: 10101
  • Location: Kitsap/Cle Elum
  • I like big bucks and I can not lie
Re: Need metal RV cover, suggestions??
« Reply #26 on: May 05, 2019, 09:52:03 AM »
 :tup:
Never argue with an idiot. They will drag you down to their level and beat you with experience.
Mark Twain


I Ain't Captain Walker.
I'm The Guy Who Carries Mr. Dead In His Pocket


What would life be without the thrill of the hunt ?

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+25)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11484
  • Location: East Wenatchee
Re: Need metal RV cover, suggestions??
« Reply #27 on: May 05, 2019, 10:03:54 AM »
I’m looking into plans of pole buildings, going to see if a lumber package will be cheaper, and build it myself.
Problem with a pole bldg.is you need a permit which also involes the "storm water run off" Gestapo

Most jurisdictions require permits and engineering for the metal ones too.......I know Douglas county does. 

Offline scotsman

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Longhunter
  • *****
  • Join Date: Dec 2010
  • Posts: 752
Re: Need metal RV cover, suggestions??
« Reply #28 on: May 09, 2019, 09:08:02 AM »
Just ordered a 30x35 enclosed storage garage from Randy. It’ll fit our 30’ class A motorhome and 19’ Grady White. The building is about 20K, plus engineering, concrete, permit, taxes, electric will total about 35K.  Not bad!

Offline CoryTDF

  • Make it Rain!!!
  • Non-Hunting Topics
  • Trade Count: (+5)
  • Frontiersman
  • *****
  • Join Date: Feb 2009
  • Posts: 3136
  • Location: Walla Walla
  • Look at me I'm blowing a duck call!
Re: Need metal RV cover, suggestions??
« Reply #29 on: May 09, 2019, 10:16:45 AM »
Tag
CoryTDF

"The only thing necessary for the triumph of evil is for good men to do nothing"
- Edmund Burke (1729-1797), British statesman and philosopher

 


* Advertisement

* Recent Topics

What decoy bag for Texas Rigged decoys is the best by Kola16
[Today at 12:34:09 PM]


Dodge trucks by trophyhunt
[Today at 12:13:44 PM]


Idaho Non-Res draw results by trophyhunt
[Today at 12:02:12 PM]


Are all case trimmers created equal? by Buckjunkie
[Today at 11:07:22 AM]


Pack/ backpack to carry a folding long and edc etc.? by Sundance
[Today at 09:44:05 AM]


WTS: Long Hunter in D2, Osage Orange by A. Cole
[Today at 08:54:53 AM]


HUNTNNW 2025 trail cam thread and photos by hunter399
[Today at 08:13:47 AM]


Build a 7mm Weatherby mag by bearpaw
[Today at 06:37:48 AM]


Idaho on the verge of outlawing by kodiak06
[Today at 06:26:14 AM]


Montana Cutting Deer Licenses by wa.hunter
[Today at 01:54:14 AM]


Another reloading newb question by GWP
[Yesterday at 09:38:05 PM]


Tis The Season by Blacklab
[Yesterday at 08:50:12 PM]


Winchester SX3 problem by ASHQUACK
[Yesterday at 08:38:40 PM]


New bow ideas by blackveltbowhunter
[Yesterday at 07:19:46 PM]


PRIME CENTERGY by Three Pines
[Yesterday at 06:10:49 PM]


From Behind by Kingofthemountain83
[Yesterday at 03:54:31 PM]


Winthrop wolves by ghosthunter
[Yesterday at 03:00:59 PM]


Idaho's new Deer/Elk License System by CarbonHunter
[Yesterday at 01:26:46 PM]


Idaho Trapping Journal 2025/26 by TeacherMan
[Yesterday at 01:01:44 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal