collapse

Advertisement


Author Topic: bullet seating depth?  (Read 2022 times)

Offline logan

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 45
  • Location: buckley,wa
bullet seating depth?
« on: June 07, 2012, 06:18:21 PM »
I'm reloading a 300 win mag with barns 168 tsx btls. I'm using a hornady press and die. and my overall length is 2.920. to finish what i started i had to buy a new box of bullets. when i reloaded those i was getting 2.922-2.925. so i check every thing i could think of does anybody have any suggestions.

Offline wsmnut

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2008
  • Posts: 449
  • Location: Twisp, WA
Re: bullet seating depth?
« Reply #1 on: June 07, 2012, 06:32:55 PM »
Are you using a bullet comparator for measuring?  Or are you
measuring the over all length?  I am going to guess you are using COL.
Bullet lengths vary, and since the tip doesn't engage the rifling, it's not
important unless your cartridge won't fit in the magazine.
     Find a comparator for .30 caliber and you'll be a lot more precise.

Good Luck

wsmnut
Wsmnut


Belief is so often the death of reason.
Moron Lube

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: bullet seating depth?
« Reply #2 on: June 07, 2012, 06:57:37 PM »
Is your die set up to seat off the tip or the ogive? You will always have that problem if your seating off the tip and measuring overall length. Get a comparator, measure off the ogive. Set it and forget it.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #3 on: June 07, 2012, 07:07:04 PM »
Agree'd..

Make the loaded cartridge fit in the magazine and move freely so it cycles through the action to chamber.

For the beginning reloader, I suggest that the OAL, is really a measurement from the case base to the ogive where it would contact the lands of the bore. Learn how to do this.  (Bullet comparator)   Backing off .005-.009" from the lands is a good place to start and will likely be quite close to the OAL (sammi) spec in the book.

That said, the barns 168 tsx is not a lead exposed bullet so measured bullet length should be quite consistent. (measure a bunch of the bullets and come up with an average length out of one lot/box.)

Your loaded cartridges should not vary more than +-.003".  If you're loading for hunting purposes and not long range sniping, then you'll never notice +-.005" difference having an effect on accuracy.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #4 on: June 07, 2012, 07:16:07 PM »
Why is it that new reloaders must spend hard earned cash on premium bullets?  To the rest of the readers, ... Remington Power Points bulk packed at Cabelas are less than half the price to practice/learn with.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: bullet seating depth?
« Reply #5 on: June 07, 2012, 07:37:11 PM »
Why is it that new reloaders must spend hard earned cash on premium bullets?  To the rest of the readers, ... Remington Power Points bulk packed at Cabelas are less than half the price to practice/learn with.

-Steve

What?? I'm supposed to be shooting something other than Barnes???   :chuckle: :chuckle: :chuckle: :chuckle:

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #6 on: June 07, 2012, 07:39:53 PM »
No secret that you're not a beginner... ;)

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline logan

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 45
  • Location: buckley,wa
Re: bullet seating depth?
« Reply #7 on: June 07, 2012, 08:55:26 PM »
i did not think to measure the actual bullet. thanks for the info.

 


* Advertisement

* Recent Topics

Benchmade by Rat44
[Today at 01:46:48 AM]


public land blacktail traditional archer by addicted1
[Yesterday at 11:24:36 PM]


Prince of Wales Spring Bear 2026 by RB
[Yesterday at 09:25:03 PM]


Idaho on the verge of outlawing by HUNTINCOUPLE
[Yesterday at 08:47:34 PM]


Wyoming North Central by catdog
[Yesterday at 06:10:52 PM]


Flooded Corn: Senator Calls USFW To Conduct Formal Study by Fromm
[Yesterday at 06:02:55 PM]


Idaho deer 2026. Let’s go!! by 762Gunner
[Yesterday at 05:49:25 PM]


Idaho Non-Res draw results by jjhunter
[Yesterday at 05:44:55 PM]


Know Where To Hunt Club by YoungFowler
[Yesterday at 05:33:55 PM]


WANTED- Barren Ground Caribou Cape by BlackRiverTaxidermy
[Yesterday at 04:10:48 PM]


eastside turkey hunting area secured access by mboyle0828
[Yesterday at 03:48:27 PM]


Form 1 Engraving Services by Sundance
[Yesterday at 02:58:57 PM]


6x51R by JDHasty
[Yesterday at 12:34:29 PM]


Special vs. Regular Pronghorn in WY by Jimmy33
[Yesterday at 12:14:12 PM]


Late season in gods Country My big buck by Scruffy
[Yesterday at 12:51:44 AM]


Washington Wild Sheep Foundation Banquet by time2hunt
[January 08, 2026, 09:55:12 PM]


GROUSE 2025...the Season is looming! by ghosthunter
[January 08, 2026, 09:37:28 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal