Author Topic: How to get a boat off then back on to a new trailer? Photos Added (Read 11173 times)

lokidog · « **Reply #30 on:** August 31, 2013, 10:29:27 PM »

Coulde be, I was assuming it was an outboard, I know nothing about inboards and outdrives other than I wouldn't own one.

They make brackets that can attach to the stern of boats that had an inboard in order to convert it to an outboard.

As far as the steel to use to repair the tongue, use the same dimensions. I would guess it is 1/4 inch thick and either 4X4 or 4X6 inch. If the existing steel is strong enough, 3/8 or 1/2 inch bolts through plates on the sides should be enough but, I'm not there.

Smossy · « **Reply #31 on:** August 31, 2013, 10:45:35 PM »

I just declined the offer, Im broke as it is. On to the next one.

tmike · « **Reply #32 on:** August 31, 2013, 10:53:06 PM »

Smart move. I was just going to post "Do you have a lot of money? If not I'd pass on it no matter how good it sounds. You're going to get nickle and dimed to death.

There's a reason it's been sitting there."

lokidog · « **Reply #33 on:** August 31, 2013, 10:54:21 PM »

Oh well, lots of decent deals out there as winter approaches and the boating season goes away. You just need to decide what your boating needs are and just make sure what you find meets them.

Smossy · « **Reply #34 on:** August 31, 2013, 10:56:54 PM »

Quote from: lokidog on August 31, 2013, 10:54:21 PM

Oh well, lots of decent deals out there as winter approaches and the boating season goes away. You just need to decide what your boating needs are and just make sure what you find meets them.

Yeah we just want something big enough to be able to go into parts of the sound, Crabbing/Ling fishing when season comes back around, but not so big we cant take it around to lakes and such.

Wacenturion · « **Reply #35 on:** September 01, 2013, 09:37:30 PM »

Quote from: turkeyfeather on August 31, 2013, 01:03:18 PM

You can buy a new reciever hitch and either bolt or weld it onto the old trailer.

ICEMAN · « **Reply #36 on:** September 01, 2013, 09:41:32 PM »

Winch

Winch

Winch, not wench...

Smossy · « **Reply #37 on:** September 01, 2013, 11:30:43 PM »

Quote from: ICEMAN on September 01, 2013, 09:41:32 PM

Winch

Winch

Winch, not wench...

The thought was there. Not really worried about it now.

turkeyfeather · « **Reply #38 on:** September 02, 2013, 07:29:59 AM »

Quote from: Smossy on August 31, 2013, 10:45:35 PM

I just declined the offer, Im broke as it is. On to the next one.

I think that was probably a good move on your part.

dawn2dusk · « **Reply #39 on:** September 02, 2013, 08:19:43 AM »

I've learned the hard way, that whole Bring Out Another Thousand thing can be no joke. Probably the right call. Plus as an archer there's no time for anything else!!

skeeter 20i · « **Reply #40 on:** October 02, 2013, 07:15:45 AM »

Hey Smossy check out the Bassboat restoration stuff over on BBC there are posts on everything from how to lift it off the trailer to wiring to buffing out the gel coat. Lots of good stuff over there. You could really have a gem on your hands with some elbow grease.

http://www.bbcboards.net/bassboat-restoration/

Smossy · « **Reply #41 on:** October 02, 2013, 01:39:23 PM »

Quote from: skeeter 20i on October 02, 2013, 07:15:45 AM

Hey Smossy check out the Bassboat restoration stuff over on BBC there are posts on everything from how to lift it off the trailer to wiring to buffing out the gel coat. Lots of good stuff over there. You could really have a gem on your hands with some elbow grease.

http://www.bbcboards.net/bassboat-restoration/

I already passed on the deal, Thanks though!

Hunting Washington Forum

News:

Advertisement