collapse

Advertisement


Author Topic: What size of a load do you use, no, not that one  (Read 7389 times)

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39215
  • Location: Rochester
    • robert68
Re: What size of a load do you use, no, not that one
« Reply #15 on: January 04, 2009, 10:31:28 PM »
Improved Modified is not the same as Improved Cylinder, it is right between Modified and Full. It very well could have been too tight for steel shot and threw ragged patterns. No way to know without actually going out and patterning the gun with the different chokes on paper. I have patterned my shotguns and the Improved Cylinder choke tube usually provides close to full choke patterns with steel shot.

Offline Curly

  • Trade Count: (+2)
  • Legend
  • ******
  • Join Date: Mar 2007
  • Posts: 20921
  • Location: Thurston County
Re: What size of a load do you use, no, not that one
« Reply #16 on: January 05, 2009, 09:10:14 AM »
It looks like a lot of you are shooting 12 gage chambered in 3" & 3 1/2". What is good for those (like ME) who shoot 2 3/4"? My wife is shooting a 20 Gage in 2 3/4 or 3"? I've been shooting #2 & 3 shot and my wife #4 (all we can find in 20 gage).

When I used to hunt ducks a lot (20 yrs ago).......I used 2 3/4" shells and usually I'd mostly use #2's but a lot of times I'd use #1's when I couldn't get the ducks to come right in.  And a lot of times I'd put the 1's in for the 3rd shot.  1's work great for mallards.

I used #3's occasionally and they were fine, especially for teal and widgeon and close mallards.  I never used #4's.......but back then we didn't have the extra high velocity ammo that is available today.  You can get away with a little smaller size shot if you get the super high velocity steel......like 1500 fps.
May I always be the kind of person my dog thinks I am.

><((((º>` ><((((º>. ><((((º>.¸><((((º>

Offline M_59

  • Trade Count: (+8)
  • Hunter
  • ***
  • Join Date: Dec 2007
  • Posts: 146
  • Location: Mt. Vernon, WA
Re: What size of a load do you use, no, not that one
« Reply #17 on: January 05, 2009, 10:13:59 AM »
Gobble, To the best of my knowledge the only chokes available for the M59 were the full, modified, and Improved Cylinder. I am quite sure that is the one you have in and would be the only one I would use with steel and then nothing larger than #2's. 

Offline Gobble Gobble

  • Proud Daddy & Disabled Veteran
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1078
  • Location: Yakima, WA
  • B.O.H.I.C.A.
Re: What size of a load do you use, no, not that one
« Reply #18 on: January 06, 2009, 10:31:25 AM »
Thanks all. I have patterned the two chokes for Turkey using differant shot sizes but not for waterfowl (just never thought about it). I should go out and do it. I hunt Turkey now with my bow.
God Bless,
Scott

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9134
  • Location: In the "Blind"! Go Cougs!
Re: What size of a load do you use, no, not that one
« Reply #19 on: January 07, 2009, 06:22:52 PM »
I try to duck hunt several times a week.  I have pretty much stuck to shooting Kent Fast Steel, 3" BB's.  It's a good all around shot, so you don't have to change loads if geese come in etc.  If your an accurate shooting in the 40 yard rang and not a sky buster BB's make a large enough hole the criple loss is minimal.  I used to shoot 3", 2's when the bird were consistenly under 20 yards.  Nice full pattern with a modified choke.  Minimal cripples. 
A good thing to do is grab a few different loads and chokes and see which ones pattern the best with the least amount of holes in your pattern.  Then stick with that load all season if possible.  You will become a consistent shooter as you get used to shooting a specific load and shot size.  Varying shell speeds won't be a handicap.
« Last Edit: January 07, 2009, 07:26:14 PM by h2ofowlr »
Cut em!
It's not the shells!  It's the shooter!

 


* Advertisement

* Recent Topics

Pouge unit help by Gentrys
[Today at 04:26:33 PM]


Got a great deal on a jet sled by pickardjw
[Today at 04:22:32 PM]


2025 Quality Tag Hunt. 💥VIDEO 💥 by Pathfinder101
[Today at 04:21:02 PM]


Selkirk bull moose. by shootnrun
[Today at 04:19:27 PM]


My Entiat Late tag thread by Pathfinder101
[Today at 04:18:10 PM]


The "King" by Pathfinder101
[Today at 04:16:59 PM]


GM 6.6l gas 6 speed vs. 10 speed? by HntnFsh
[Today at 04:13:57 PM]


From Behind by Pathfinder101
[Today at 04:08:58 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Ridgerunner
[Today at 04:07:30 PM]


Eastern Elk Management by Longfield1
[Today at 03:52:16 PM]


White River late archery by bigtex
[Today at 03:28:14 PM]


What boots? by fishngamereaper
[Today at 03:19:47 PM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 01:09:15 PM]


Range finders & Angle Compensation by steeleywhopper
[Today at 12:41:48 PM]


Diarrhea ? by EnglishSetter
[Today at 12:00:59 PM]


How wide? by Mtnwalker
[Today at 11:29:23 AM]


fur market update/skunk update by Humptulips
[Today at 09:33:08 AM]


Willipa Hills Antlerless tag by GOcougsHunter
[Today at 08:16:59 AM]


Idaho's new Deer/Elk License System by RB
[Today at 06:35:48 AM]


What are some good 12 ga factory loads for predators? by Goshawk
[Yesterday at 08:51:55 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal